-
Processor: RP2040
-
SRAM: 264KB
-
Flash Memory: 16MB
-
Compact Form Factor
-
GPIO Pins
Buy USB interface modules online in India at Zbotic. Our extensive range includes USB-UART converter modules (CH340, CP2102, FT232, PL2303), USB host shields, USB hubs, USB-C breakout boards, and USB power delivery modules. These modules enable serial communication, device programming, data transfer, and USB power management in electronics projects and custom hardware designs.
5V power supply.
Serial I2C control of LCD display using PCF8574.
Backlight can be enabled or disabled via a jumper on the board.
Contrast control via a potentiometer.
Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
It can be used with NRF24L01 wireless module
Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
Allows for easy connection to nRF24L01+ modules
Small power on SMD LED indicator
DB9 RS232 D-SUB Male Adapter 9-pin Port Adapter to Terminal Connector Signal Module
Suitable for variety of pin connections required to use serial communications industrial control products
No need solder! It is convenient
DB9 male adapter with screw
QUICK OVERVIEW:
Compatible Chips:
ATMEGA Series
Tiny Series
Classic Series
CAN Series
PWM Series
Brand new and high quality
Included USB transceiver, without external circuit device
With 3.3V and 5V dual power output
With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
Meets the USB2.0 specification requirements
With self-recovery fuse. In the event of the accidental short circuit, it can effectively protect your computer USB port and Downloader
Asynchronous serial data bus compatible with all handshake and modulation controller interface signals
The supported data format is 8 data bits, 1 stop bit and parity bits
QUICK OVERVIEW:
Logical light indication: a small light indicate CHO electrical level.
Input feature: 5PF,100K Ohm.
USB power supply; USB logic analyzer for monitoring, analyzing and debugging digital circuits
8-Channels USB logic analyzer with a 24Mhz sampling frequency
Can analyze UART, IIC, and SPI, etc automatically
Great for MCU, ARM system and FPGA development
Voltage: 0-5.5V
QUICK OVERVIEW:
QUICK OVERVIEW:
USB Connector type: USB-Mini
Chip Used: FT232RL
Output Voltage 5v and 3.3v Indicator LEDs USB Connector
Automatic detection of data transfer speeds up to 1Mbps
Data exchange capability with an external interface with UART protocol
Supports Windows 8, Windows 7, Windows Vista, Windows XP, Linux, Mac OS X, Windows CE 4.2-5.2, Windows CE 6.0
Specifications:
QUICK OVERVIEW:
| Connectors | DB9 Male Terminal to RS232/RS485 |
| Wire Hole Diameter | 10mm |
| Mounting Type | Positioning Nuts |
| Number of Pin | 9 |
| Number of Row | 2 |
| Color | Black |
QUICK OVERVIEW:
16 Bit Bidirectional I/O Port.
Configurable Interrupt Output Pins
Configurable Interrupt Source.
High-Speed I2C Bus Compatible.
External Reset Input.
Low Standby Current
This is a 90-degree Angled extension USB Type-C connector.
It is useful for outputting the flight controller connector in case it is difficult to access
USB: Type C
Dimensions: 21x9x12mm
Power supply voltage: 5V
Communication interface: RS485
Relay channels: 8
Contact form: 1NO 1NC
Communication protocol: Standard Modbus RTU protocol
Communication rate: 10/100Mbps
Baudrate: 600bps~230.4Kbps
Power supply: 5.0~7.0V (EU plug)
Operating current: 150mA (@5V)
Power consumption: <1W
QUICK OVERVIEW:
M0 series 32-bit ARM processor
Protection: built-in 1.5KV electromagnetic isolation
Interface: 3.3V TTL
Supported protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client
Support DHCP, DNS, AUTO MDI/MDIX, User-defined MAC address
Provide(socket), VB, C++, Delphi, Android, IOS
USB2.0 Audio Video Capture Card Adapter VHS To DVD Video Capture Converter
Based on Qualcomm platform 4G communication module
Features RS232, RS485, and TTL port (3.3V/5V)
USB Port: supports USB dial-up, configuration, AT command, and more
Hardware watchdog to prevent crashes
Fault restart time is configurable
Trigger time and triangle length of UART are configurable
Industrial design with EMC protection
Working temperature: -40°C ~ 80°C
Easy to use
Quick Overview:
Quick Overview:
16-Pin PCIe for easy Pi 5 integration
40-Pin GPIO for HATs
PoE for power and network in one cable
5V & 12V Outputs for up to 4.5A (25W max)
Quick Overview:
Quick Overview:
POWER INPUT: 37 V ~ 57 V DC in
POWER OUTPUT: 12 V 2.1 A DC out
NETWORK STANDARD: supports IEEE 802.3af/at PoE
DIMENSIONS: 21 × 92 mm
Quick Overview:
Waveshare Rail-Mount Serial Server
Brand: Waveshare
Run voltage: DC 5-36V
Wireless standard: 802.11 b/g/n
Frequency range: 2.412 GHz-2.484 GHz
Support RS485 to Wifi/Ethernet communication
Rich indicator LED: Power, link, RXD, TXD
NVMe Protocol Support
High-speed Reading/Writing
Raspberry Pi Compute Module 4 Compatibility
Operating voltage: 3.3V-5V
RS232 transceiver: SP3232EEN
Communication bus: UART
Baudrate: 300~912600bps
Processor: RP2040
SRAM: 264KB
Flash Memory: 16MB
Compact Form Factor
GPIO Pins
On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver.
A low power consumption for the RS-485 communication
Onboard then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring.
Slew-rate limited transceiver
All pins of the chip have been lead to can be controlled through the microcontroller.
Convenient RS-485 communication wiring
Multiple Units can be connected to the same RS-485 bus wiring.
All Chip pins are brought out for proper controls
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998