Contains 7 high-voltage and high current Darlington pairs
Each pair is rated for 50V and 500mA
Input pins can be triggered by +5V
All seven Output pins can be connected to gather to drive loads up to (7×500mA) ~3.5A.
Can be directly controlled by logic devices like Digital Gates, Arduino, PIC etc
Available in 16-pin DIP, TSSOP, SOIC packages
Transistor Polarity: PNP
Collector−Emitter Voltage (VCEO): 40VDC
Collector−Base Voltage (VCBO): 40VDC
Continuous Collector Current (Ic): 3ADC
Continuous Base Current (Ib): 1ADC
Emitter Base Voltage (VEBO): 5VDC
Power Dissipation (Pd): 40W
Operating Temperature Range: -65°C to 150°C
DC Current Gain (hFE): 10-50
Continuous Collector Current: 3A
Collector-Emitter Voltage (VCE): 100V
Collector-Base Voltage (VCB): 100V
Emitter Base Voltage (VBE): 5V
Package: TO-220
Collector-Emitter Voltage: -30V
Collector-Base Voltage: -30V
Emitter-Base Voltage: -5V
Continuous Collector Current: 100mA
DC Current Gain (hFE): 110 to 800
Total Power Dissipation: 500mW
Storage and Operating Temperature Range: -65℃ to +150℃
Number of pins: 3
Package: TO-92
Mounting type: Through hole
Dimension: 9 x 15 CM
Base Material FR4
Copper Thickness 1-4 OZ
Board Thickness 1.6
Min. Hole Size 0.3mm
Min. Line Width 6mil
Min. Line Spacing 6mil
Surface Finishing HASL
Type: Photoresistor (Light Dependent Resistor)
Operating Principle: Photoconductivity
Dark Resistance: Greater than 200 MΩ
Light Resistance: Less than 2.4KΩ
Sensitivity: High sensitivity to varying light levels
Diameter: 5mm
Color: White (Note: Color may vary based on availability)
Material: High resistance semiconductor
Operating Temperature: -40°C to +70°C
Lamp Test input
Supply Voltage (VCC); 7V.
Input Voltage (VI): 7V.
Operating free-air temperature range: 0°C to +70°C
Storage temperature range: –65°C to +150°C