Looking for Atmega328p Kr? ATMEGA328P U-KR is available at Zbotic with fast shipping across India.
ATMEGA328P U-KR
- High-performance, Low-power AVR® 8-Bit Microcontroller
- Advanced RISC Architecture
- High endurance non-volatile memory segments
- Power-on reset and programmable brown-out detection
- Internal calibrated oscillator
- External and Internal Interrupt Sources
- Idle, ADC Noise Reduction, Power-save, Power-down, Standby and Extended Standby Sleep Modes
- 0 to 20MHz at 4.5 to 5.5V speed grade
- 0.2mA active mode, 0.1µA power-down mode, 0.75µA (32kHz RTC) power-save mode power consumption
Specification
- Part No: ATMEGA328P U-KR
- DAC Resolution: N/A
- Device Core: AVR
- ADC Resolution: 10 bit
- Data Bus Width: 8 bit
- CAN: 0
- Unit of Measure: Per Each
Package Includes
- 1 x ATMEGA328P U-KR
Datasheet:
ATMEGA328P U-KR Overview
The ATMEGA328P U-KR is a high-performance, low-power 8-bit AVR microcontroller that combines advanced RISC architecture with versatile on-chip resources. It’s commonly used in embedded control, robotics, and sensor interfacing projects requiring efficient instruction execution and reliable non-volatile memory.
Key Features of ATMEGA328P U-KR
- 32 KB In-System Programmable (ISP) flash memory with read-while-write capability
- 1 KB EEPROM for data logging and configuration storage
- 23 general-purpose I/O lines and 32 working registers for flexible interfacing
- Three flexible timer/counters with compare modes and internal/external interrupts
- Built-in USART, TWI (I²C) interface and SPI serial port for communication
- 6-channel 10-bit ADC (8 channels in TQFP/QFN packages) for analog signal acquisition
- Programmable watchdog timer with internal oscillator and five power-saving modes
- Wide operating voltage range from 1.8 V to 5.5 V
- Genuine ATMEGA328P U-KR and fast shipping from Zbotic
Applications and Use Cases
- DIY and commercial Arduino-compatible development boards
- Sensor data acquisition modules for environmental monitoring
- Motor control and robotics applications
- Home automation controllers and smart appliance interfaces
- Portable battery-powered instrumentation
- Custom wearable electronics with low-power requirements
How to Use ATMEGA328P U-KR
Mount the ATMEGA328P U-KR on a compatible development board or breadboard, provide a stable 1.8–5.5 V supply with decoupling capacitors, and connect an ISP programmer (e.g., USBasp or Arduino as ISP) to the SPI pins for flashing firmware. Configure fuse settings as needed using AVR programming tools, then interface peripherals via its GPIO, serial ports, timers, and ADC channels in your application code.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
What operating voltage does the ATMEGA328P U-KR support?
The ATMEGA328P U-KR operates from 1.8 V up to 5.5 V, allowing use in both low-voltage and standard 5 V systems.
How can I program the ATMEGA328P U-KR?
Use the SPI-based ICSP interface with an AVR programmer (such as USBasp or Arduino as ISP) to load firmware via the ISP bootloader or fuses.
Does the ATMEGA328P U-KR include analog inputs?
Yes, it features a 6-channel 10-bit ADC for analog-to-digital conversion, and TQFP/QFN variants offer up to 8 ADC channels.
ESP32 OTA Update: Wireless Firmware Upload Guide
Esp32 Ota Update Wireless — this detailed tutorial covers everything from hardware selection to complete working code, designed...
Read More →
Dual Core Programming: Arduino vs ESP32 Concurrency Guide
One of the biggest limitations of the classic Arduino Uno is that it runs everything sequentially on a...
Read More →
MicroPython vs C++: Which to Learn for Microcontrollers?
Choosing your first (or next) programming language for microcontrollers is one of the most important decisions you'll make...
Read More →Technical Specifications
| Model | ATMEGA328P |
|---|---|
| SKU | AI0750 |
| Weight | 0.000927 kg |
| Availability | In Stock |
Applications & Use Cases
The ATMEGA328P U-KR is a versatile boards compatible with arduino used across a wide range of applications including electronics learning, robotics, home automation, sensor interfacing, and motor control.
Common use cases:
- Learning programming and electronics
- Building a line-following robot
- Creating a home automation hub
This product is ideal for students, hobbyists, and electronics beginners.
Technical Tip: Arduino Uno is the standard learning board. Mega offers more pins for complex projects. Nano suits breadboard prototyping.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Yashwant Trivedi (verified owner) –
Decent quality ATMEGA328P U-KR. Some pins needed cleaning but works fine now.
Nikita Naidu (verified owner) –
Nice ATMEGA328P U-KR for the price. Using it in my college project, performs well.
Ravi Mittal (verified owner) –
This ATMEGA328P U-KR made my robotics project so much easier. Highly recommended for students.
Sachin Khanna (verified owner) –
Pretty good ATMEGA328P U-KR. Compatible with most libraries. Happy with the purchase.
Vinay Tiwari (verified owner) –
Good ATMEGA328P U-KR. Works well with Arduino IDE. Headers could be soldered more neatly.
Kartik Chopra –
Great quality ATMEGA328P U-KR. Uploaded my first sketch and it worked flawlessly. Ideal for beginners.
Shubham Arora (verified owner) –
This ATMEGA328P U-KR is a must-have for any maker. Works perfectly with Arduino IDE.
Saurabh Ghosh –
Nice ATMEGA328P U-KR for the price. Using it in my college project, performs well.
Harshit Kumar (verified owner) –
Superb ATMEGA328P U-KR! Compatible with all my existing Arduino shields and libraries.
Pallavi Vohra (verified owner) –
Love this ATMEGA328P U-KR. Using it for my home automation project, very reliable.
Varun Patel –
Nice ATMEGA328P U-KR for the price. Using it in my college project, performs well.
Milan Nayak (verified owner) –
Very satisfied with this ATMEGA328P U-KR. Fast shipping and genuine components. Zbotic is the best!
Dinesh Dhillon (verified owner) –
This ATMEGA328P U-KR is a must-have for any maker. Works perfectly with Arduino IDE.
Bhavna Iyer (verified owner) –
Fantastic ATMEGA328P U-KR! All GPIO pins tested and working. Great for prototyping.
Shruti Dave –
Love this ATMEGA328P U-KR. Using it for my home automation project, very reliable.
Vishal Solanki –
Good ATMEGA328P U-KR. Works well with Arduino IDE. Headers could be soldered more neatly.
Meera Kapoor (verified owner) –
Outstanding quality ATMEGA328P U-KR. I teach electronics and order these in bulk for my classes.
Aisha Rathore (verified owner) –
This ATMEGA328P U-KR is a must-have for any maker. Works perfectly with Arduino IDE.
Amit Vohra (verified owner) –
Very satisfied with this ATMEGA328P U-KR. Fast shipping and genuine components. Zbotic is the best!
Om Banerjee –
Nice ATMEGA328P U-KR for the price. Using it in my college project, performs well.
Rajesh Nayak –
Superb ATMEGA328P U-KR! Compatible with all my existing Arduino shields and libraries.
Chitra Khanna (verified owner) –
Outstanding quality ATMEGA328P U-KR. I teach electronics and order these in bulk for my classes.
Rajesh Chatterjee (verified owner) –
Nice ATMEGA328P U-KR for the price. Using it in my college project, performs well.
Lakshmi Pillai (verified owner) –
Superb ATMEGA328P U-KR! Compatible with all my existing Arduino shields and libraries.
Vijay Trivedi (verified owner) –
Bought multiple units of this ATMEGA328P U-KR. All working great. Best store for Arduino components.
Vijay Iyer (verified owner) –
Okay ATMEGA328P U-KR. Works but had to troubleshoot driver issues initially.
Dhruv Dhawan (verified owner) –
Love this ATMEGA328P U-KR. Using it for my home automation project, very reliable.
Om Bhatt (verified owner) –
Good ATMEGA328P U-KR. Took a while to get the drivers working but board itself is solid.
Karan Shah (verified owner) –
Good ATMEGA328P U-KR. Works well with Arduino IDE. Headers could be soldered more neatly.
Himanshu Garg (verified owner) –
Good ATMEGA328P U-KR. Took a while to get the drivers working but board itself is solid.
Zara Desai (verified owner) –
Average quality ATMEGA328P U-KR. Functional but packaging was minimal.
Kritika Iyer –
Great quality ATMEGA328P U-KR. Uploaded my first sketch and it worked flawlessly. Ideal for beginners.
Devansh Kohli –
Good ATMEGA328P U-KR. Took a while to get the drivers working but board itself is solid.
Eshan Bisht (verified owner) –
Average quality ATMEGA328P U-KR. Functional but packaging was minimal.