USB2.0 Audio Video Capture Card Adapter VHS To DVD Video Capture Converter
SKU: AI4293USB2.0 Audio Video Capture Card Adapter VHS To DVD Video Capture Converter
0.96 Inch SPI OLED LCD Module 6pin (with VCC GND) SSD1306 Chip
SKU: AI3588Size: 0.96-inch OLED
Material: PM OLED
Resolution: 128*64
Interface type: SPI, IIC
Working voltage: 3.3V
Control chip: SSD1306
Piezo Buzzer 23mm
SKU: AI3583
QUICK OVERVIEW:
Add to cart
Add to Compare
- Plate Diameter: 23mm
- Plate Material: Brass Resonant
- Frequency (kHz): 6.3 +/- .6kHz
24V 8 Channel Relay Module
SKU: AI3213QUICK OVERVIEW:
- Header connector for connecting power and trigger voltage.
- LED on each channel indicates relay status.
- Screw terminal connector for easy relay output and aux power connection.
Waveshare Solar Power Manager Module (D), Supports 6V~24V Solar Panel and Type-C Power Adapter, 5V/3A Regulated Output Battery holder Included
SKU: AI6670- Input Voltage: 6V~24V
- Output Voltage: 5V
- Output Current: 3A
- Charging Method: Solar panel or Type-C connector
- Protection Circuits: Over-charge, over-discharge, overheat, over-current
- Charging Indicator: LED indicators for solar panel and battery status
5D Rocker Joystick for Arduino, MCU, AVR Game
SKU: AI5926- Supports up/down/left/right/middle with extra set and reset button
- 2V-9V wide working voltage
- The number of IO: 7
- Operating temperature: -40℃ to 85℃
- Size: 4×2.5cm
4 Channel 5V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive
SKU: AI3163- Part Number: G3MB-202P
- Power supply:5VDC/160mA
- Trigger Voltage (VDC):5
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
12V Relay Module with Automatic Delay Timer
SKU: AI2781QUICK OVERVIEW:
- Operating Voltage: 12VDC
- Output Capacity: Can Control the Load within DC 30V 5A or AC 220V 5A
- Working Current: 50mA
Waveshare RGB Full-Color LED Matrix Panel, 3mm Pitch, 64×64 Pixels, Adjustable Brightness
SKU: AI0799
Power supply: 5V / 4A (VH4 header input)
Power: ≤20W
Pitch: 3mm
Driving: 1/32 scan
Header: HUB75
433MHz 5V 1 Channel Relay Module Wireless Remote Control Switch
SKU: AI7428Quick Overview:
- Operating Voltage: DC 5V
- Operating Temperature: -40~80°C
- Operating Frequency: 433MHz
- Receive Sensitivity: ≥ -95dB
- Working Modes: Jump switch, point action, self-locking, and interlocking (adjustable)
DC-DC5-40V to 5V 1A Buck Step Down Converter Module with PIN
SKU: AI3005- Input voltage 5~40V
- Output: 5V
- Maximum output current 1A
- Efficiency: 76-90%
- Material: electronic component
4×4 Matrix 16 Push Button Keyboard Module
SKU: AI3225
QUICK OVERVIEW:
- 4×4 Matrix Keyboard Module with 16 buttons
- Small in size and hence Save space
- More convenient to use
- Expanded development application modules for single chip
- With 16 keys and 8 pin
- Keypad dimensions: 39mm x 43mm x 6mm
XM-18 Temperature and Humidity Controller
SKU: AI0489QUICK OVERVIEW
- Temperature Measuring Range: 0-99℃
- Temperature Measurement Accuracy: ±0.1℃
- Humidity Measurement Range: 0-99% RH
- Humidity Accuracy: ±3% RH
5V/7-28V ESP8266 WIFI 8 Channel Relay Module ESP-12F Development Board
SKU: AI3251QUICK OVERVIEW:
- Board size: 149*80mm
- Weight: 140g
- Power supply mode supports DC7-28V/5V
- Onboard WIFI module RST reset button
- 4M Byte Flash
Nokia 5110 LCD Display Module – Red
SKU: AI2740Operating supply voltage: 5 to 7V
Data interface level: 2.7-5V.
Resolution: 84 x 48 pixel
Backlight: Blue.
24V 6 channel with light coupling relay
SKU: AI2398
2V relay with AC contact capacity of 10A 250V and optocoupler protection.
The onboard power supply module does not need an external power supply. I / O port driver is active low.
The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
It is using the industry’s top-quality isolation optocouplers, strong anti-jamming ability, stable performance.
The 1-16 road can be any full-on/off or any road.
All interfaces can be directly connected through the terminal leads, very convenient.
0.96 Inch SPI OLED LCD Module 6pin (with GND VCC) Blue SSD1306 Chip
SKU: AI3566QUICK OVERVIEW:
- OLED Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Compatible I/O Level: 3.3V, 5V
- Mini Size: 2.7 x 2.8cm
- Only Need 2 I/O Port to Control
Waveshare Solar Power Manager (C) Supports 3x 18650 Batteries Multi Protection Circuits
SKU: AI0877 ₹1,791.24 (₹1,518.00 + GST)
Supports MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel
Flexible battery recharging: from the solar panel as well as USB TYPE-C power adapter
Compatible with 6V~24V solar panels, DC-002 jack input or screw terminal input
Heavy Aluminium body with a stylish finish and Multi status LEDs
Batteries can be easily replaced by removing the cover.
Waveshare 7inch Capacitive Touch Screen LCD (C), with Bicolor case 1024×600, HDMI, IPS, Low Power
SKU: AI2045Resolution:1024 x 600
Display Port: HDMI
Touch Type: Capacitive
Touch Points:5 points
7-inch IPS screen with a hardware resolution of 1024×600.
5-points capacitive touch control.
Using Raspberry Pi, it supports Raspbian / Ubuntu / Kali / Retropie and WIN10 IoT, no need to install any drivers.
Waveshare 128×32, General 0.91inch OLED Display Module
SKU: AI1562Quick Overview:
- Product Name: Waveshare 128×32, General 0.91inch OLED Display Module
- Driver: SSD1306
- Interface: I2C
- Display color: white
- Resolution: 128×32
- Power supply voltage: 3.3V/5V
Full Color LED Module / RGB V2 Light Water for Arduino
SKU: AI1089Good PRINT PACK design, very beautiful.
8 worlds of the three primary colors (red-green-blue) LED color, scanning control mode.
Applicable for various platforms, such as 51 / AVR / AVR / ARM / for Arduino All kinds of platforms.
Hi-Link HLK 5M24 24V/5W Switch Power Supply Module
SKU: AI0772
Ultra-thin, ultra-small
Voltage input (AC: 100 ~ 240V)
Output Power(Watt):5
Low ripple and low noise
Output overload and short circuit protection
High efficiency, high power density
The product is designed to meet the requirements of the EMC and Safety Test
Add to cart
Add to Compare
PCF8563 RTC Board For Raspberry Pi Real Time Clock Module-Blue
SKU: AI0949
Model: PCF8563
Weight : 3 gm.
I2C pin header,
3.3V battery.
Dimensions : 61 x 16 x 11 mm (LxWxH).
Waveshare Industrial USB TO 4CH TTL Converter, USB To UART, Multi Protection & Systems Support
SKU: AI6668 ₹1,386.50 (₹1,175.00 + GST)- Working voltage: 5V
- Working current: 32mA
- Serial Baud rate: 1200bps ~ 460800bps
- TTL voltage: 3.3V / 5V (configurable)
- Working temperature: -40°C ~ 85°C
- Supported OS: Mac OS, Linux, Windows 11/10/8.1/8/7, Android
Waveshare Industrial grade USB HUB , Switchable dual hosts, Multi Protections
SKU: AI6708- Standard High-Speed USB 3.2 Gen 1
- Data Rate Up To 5gbps
- USB Output 5v@imax:1.2a, Usb-a Connector
- USB Hub Input 5v, Switchable Dual Usb-a Connectors
- External Power Dc Power Supply Terminal 7~36v
Waveshare USB To UART/I2C/SPI/JTAG Converter, Supports Multiple Interfaces, Compatible with 3.3V and 5V
SKU: AI5964- Supports USB to 2-ch UART, or USB to 1-ch UART + 1-ch I2C + 1-ch SPI, or USB to 1-ch UART + 1-ch JTAG
- Supports 2-ch high-speed UART interfaces, up to 9Mbps baud rate, with CTS and RTS hardware automatic flow control
- Supports 1-ch I2C interface, for easy operating EEPROM through the host computer or programming I2C devices such as OLED and sensor
- Supports 1-ch SPI interface, with 2x chip select signal pins, capable of controlling 2-ch SPI slave devices at different times
- Supports 1-ch JTAG interface, can be used with OpenOCD for debugging and testing (Due to the limited testing of chips and software functions, users need to evaluate and test this function on their own)
- Onboard 3.3V and 5V level conversion circuit for switching the operating level of the communication interface, better compatibility
- The onboard resettable fuse and ESD protection circuit, provides over-current/over-voltage proof, safe and stable communication
- Aluminium alloy case with oxidation dull-polish surface, CNC process opening, solid and durable, well-crafted
- High-quality USB-B and DC connectors, smooth plug & pull, durable and reliable, with anti-reverse protection
2 Channel 3-24V Relay Module Solid State Low Level SSR DC Control DC with Resistive Fuse
SKU: AI3157- Part Number: H3MB-052D
- Power supply:3-24VDC/160mA
- Trigger Voltage (VDC):3-24 VDC
- Switching Voltage (VAC):50@2A
- Isolation: Phototriac
LM7809 9V DC / AC, Three Terminal Voltage, Regulator Power
SKU: AI2525
QUICK OVERVIEW:
- Input Voltage: 12-24V DC/AC
- Output Voltage: 9V DC
- Max Current: 1.2A
4 Channel Relay Module, 30A with Optocoupler, Isolation 24V Supports, High and Low Triger
SKU: AI3146- Supply Voltage: DC 24V
- Quiescent Current: 5mA
- Maximum Operating Current: 190mA
- Trigger Mode: high and low-level trigger
- Load Voltage: DC 30V / AC250
- Load Current: 30A
- Relay Life: more than 100,000 times
- Trigger Voltage Range: Low-level trigger: 0-2V relay ON; 3-5V relay OFF; High-level trigger: 3.3-5V relay ON; 0-2.5V relay OFF
12V Cold White 5050 SMD LED Strip- 5Meter
SKU: AI2826QUICK OVERVIEW:
- LED Glow Color: Cold White
- Strip Length: 5 Meter
- Operating Voltage: 12V DC
- Strip width: 10 mm
- No. of LEDs: 60LED/Meter
- Protection Level: IP20 (Not Waterproof)
Waveshare PL2303 USB To UART (TTL) Communication Module V2, USB-A Connector
SKU: AI2043
QUICK OVERVIEW:
Add to cart
Add to Compare
-
Adopts PL2303GS new version device
-
Supports windows XP/7/8/10/11/…
- Operating Voltage(V): 3.3 to 5
- No. of Pins: 4
SMPS 24V 6AMPS
SKU: AI5748- Power conversion efficiency: 80%
- Safety standards: EN60950, GB4943
- Dimension: 199 x 98 x 40mm
- LED power indication
- Output: 24V, 6Amp
- Input:180V to 260V AC , 47 to 63Hz
Waveshare Industrial Grade Serial Server RS232/485 To WiFi and Ethernet, Modbus Gateway, MQTT Gateway, Metal Case RJ45 network port
SKU: AI5709- Brand: Waveshare
- Model: RS232
- Power supply: DC 6~36V
- Frequency Band: 2.412 to 2.484GHz
- Dimensions: 100*85*25mm
1 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse
SKU: AI4138Part Number: G3MB-202P
Power supply:12VDC/160mA
Switching Voltage (VAC):240@2A
Isolation: Phototriac
5V Modbus RTU 1Channel Relay Module Input Optocoupler Isolation RS485 MCU for Arduino
SKU: AI3819Product Name:1 Bit Modbus RTU Relay Module
Working Voltage: DC 5V
Working Current:1A
Work Temperature:-25℃~85℃
Work Humidity:5%~95%RH
12V Modbus RTU 8, Channels Relay Module, Input Optocoupler, Isolation RS485 MCU
SKU: AI2968
QUICK OVERVIEW:
- Product Name:8 Bit ModbusRTU Relay Module
- MCU: One STM8S103K
- Working Voltage: DC 12 V
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
Waveshare 2.9 inch e-Ink Paper Display Module with SPI Interface
SKU: AI1575- Display Resolution: 296×128
- Display Screen Color: Black and White
- No backlight so keeps displaying last content for a long time even when the power is down
- Ultra low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
4 Channel 24V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive Fuse
SKU: AI3686MODEL NO: HY-M283
QUICK OVERVIEW:
- Part Number: G3MB-202P
- Trigger Voltage (VDC):24
- Switching Voltage (VAC):240VAC~5060Hz,2A
- Isolation: Phototriac
- Zero Cross: Yes
1 Channel 24V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive
SKU: AI3156- Part Number: G3MB-202P
- Power supply: 24VDC/160mA
- Switching Voltage (VAC): 240@2A
- Isolation: Phototriac
Waveshare RP2040 MCU Board, With 1.28inch Round LCD, accelerometer and gyroscope Sensor
SKU: AI0878
QUICK OVERVIEW:
- Brand: Waveshare
- Product: RP2040 MCU Board, With 1.28inch Round LCD,
- Display Panel: IPS
- Accelerometer Resolution: 16 bits
- Gyroscope Resolution: 16 bits
Stereo Wireless Speaker Bluetooth 4.0 Audio Receiver Module For DIY Modified Speaker
SKU: AI2606
QUICK OVERVIEW:
Add to cart
Add to Compare
- Stereo Wireless Speaker Bluetooth 4.0 Audio Receiver Module For DIY Modified Speaker has a built-in Bluetooth module.
- The antenna structure is simple.
- The power supply voltage is 3.7 ~ 5V;
- active speakers increase Bluetooth connection function. The 7PIN output interface is spacing 2.54 through a hole; The LED state port is connected with a 100-ohm
5mm Two-Color LED Module
SKU: AI2504Quick Review:
- Operating Voltage: 2.0v ~ 2.5v
- Current: 10mA
- Diameter: 5mm
- Color: Red + Green
- Beam Angle: 150
8 Channel 5V Solid State Relay Module Board OMRON for Arduino
SKU: AI2404
8-channel 2 AMP Solid State Relay board.
Control 8 loads of up to 2 amps each at 120 V or 240 VAC.
Good for lighting, Holiday displays etc.
With 8 Solid State Relays: 2A at 100 to 240 VAC.(50/60 Hz).
Power supply: 5 V DC (160 mA)
Trigger Current: 2mA.
Trigger Voltage: 3.3V-5V.
Waveshare Industrial Isolated Multi-Bus Converter, USB / RS232 / RS485 / TTL Communication
SKU: AI2046
The Multibus Converter is an industrial grade isolated converter that supports USB / RS232 / TTL to RS232 / 485 / TTL, with built-in power...
Add to cart
Add to Compare
Waveshare 3.2inch HDMI IPS LCD Display (H), 480×800, Adjustable Brightness, No Touch
SKU: AI6696
This is a Waveshare 3.2inch HDMI IPS LCD Display (H) 480×800 Adjustable Brightness No Touch supports Raspberry Pi, Jetson Nano,...
Add to cart
Add to Compare
Waveshare 10.1inch Capacitive Touch Display, Wide Color Gamut, 1280×800, Optical Bonding Toughened Glass Panel, HDMI/Type-C Display Interface
SKU: AI6645- Model 10.1HP-CAPLCD Monitor /
- Dimensions 10.1 Inch
- Viewing Angle 178 Deg
- Resolution 1280 x 800 Pixels
- Overall Dimensions 241.00(H) × 149.00(V) × 11.80(D)
LED Scroller Matrix keyboard
SKU: AI3226QUICK OVERVIEW:
- Switch Type: Momentary
- Pin Spacing (mm): 2.54
- Module Dimensions (L x W x H): 57 x 33 x 6
- Weight: 10gm
- 4×4 Matrix Keyboard Module with 16 buttons
24V Warm White 5050 SMD LED Strip-5Meter
SKU: AI2636QUICK OVERVIEW:
- LED Glow Color: Warm White
- Strip Length: 5 Meter
- Operating Voltage: 24V DC @2A
- Strip width: 10 mm
- No. of LEDs: 60LED/Meter
- Protection Level: IP20 (Not Waterproof)
Dry Reed Pipe Magnetron Magnetic switch Module
SKU: AI2508Quick Review:
- Clean, good waveform driving ability, more than 15mA.
- Working voltage 3.3V-5V
- Output format: digital switching output (0 and 1)
- A fixed bolt holes for easy installation
Waveshare 13.3inch Capacitive Touch Screen LCD with Case V2, 1920×1080, HDMI, IPS, Various Systems Support (Without Power Adapter)
SKU: AI2041
Display Type: LCD
Touch Type: Capacitive
Touch Point:10
Display Resolution:1920×1080
Viewing Angle:178°
Add to cart
Add to Compare
Waveshare 15.6inch Capacitive Touch Screen LCD, 1920 x 1080, HDMI, IPS, Various Systems Support
SKU: AI7534Quick Overview:
- Toughened glass capacitive touch panel, 6H hardness
- Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers
- When working with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, single touch, and driver free
- When working as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free
- 3.5mm audio jack supports HDMI audio output
12V 2 Channel Low Level Relay Module Without Light Coupling
SKU: AI4160Default Relay trigger Setting : Low-Level
Logic Input (V) : 3.3 ~ 5
Trigger Voltage (VDC) : 12
Switching Voltage (VAC) : 250@10A
Switching Voltage (VDC) : 30@10A
8 Channel 3-24V Relay Module Solid State Low Level SSR DC Control DC with Resistive Fuse
SKU: AI3166
Part Number: H3MB-052D
Power supply:3-24VDC/160mA
Switching Voltage (VAC):50@2A
Isolation: Phototriac
Yellow Electronic Building Blocks Big Key Button Module High Level Output
SKU: AI3082
QUICK OVERVIEW:
- Interface: Standard electronic block (GND, VCC, SIG)
- Working voltage: 2-5.5VDC
- Working Current: 0.55mA(MAX)
- Output: digital level (press high, release low)
- Great for DIY projects
Hi-Link HLK PM03 3.3V/3W Switch Power Supply Module
SKU: AI0773
Meet UL, CE requirements.
Ultra-thin, ultra-small.
All voltage input (AC: 100 ~ 240V).
Low ripple and low noise.
Output overload and short circuit protection.
High efficiency, high power density.
DC-DC DC5-40V to 7.5V 1A Buck Step Down Converter Module Voltage Regulator Board without PIN
SKU: AI3009
QUICK OVERVIEW:
Add to cart
Add to Compare
- Input voltage 5~40V
- Output: 7.5V
- Maximum output current 1A
- Efficiency: 76-90%
- Material: electronic component
- Size: 18.3mm x 10.2mm x 6.7mm
- Color: green
5V 1 Channel Bluetooth, Relay Module Things, Smart Home Remote, Control Switch
SKU: AI3149- Onboard Bluetooth status indicator and relay indicator
- With optocoupler isolation, strong anti-interference ability
- Onboard N76E003/STM8S003 and SPP-C Bluetooth 2.1 module
- Effective control distance(on open area): 10m
- Module Operating Voltage: 5VDC
- On-board 5V, 10 A / 250 v AC 10 A / 30 v DC relay, absorb 100000 times continuously.
Waveshare 7 Inch Capacitive Touch LCD Display (F) 1024×600
SKU: AI0343
QUICK OVERVIEW:
- Capacitive touch LCD display.
- TFT-LCD panel
- High Resolution:1024(RGB) x 600 Dots
- Adopting a high aperture ratio
- 24 chip LED backlight
- Dot-Inversion
Waveshare PCIe TO M.2 Adapter, Supports Raspberry Pi Compute Module 4
SKU: AI1569- Adapter For NVMe Protocol M.2 SSD, Faster Reading/Writing, Improving Efficiency
- Supports Base Boards With PCI-E×1 / ×4 / ×8 / ×16 Socket
- Supports Raspberry Pi Compute Module 4
- Compatible With Different Sizes Of M.2 SSD
Songle Single-Channel 24V 30A Relay Module Power Failure Relay High Level
SKU: AI3674Quick Overview:
- Product Name : Songle Single-Channel 24V 30A Relay Module Power Failure Relay High Level
- Trigger Voltage: 24VDC
- Switching Voltage: 250VAC@30A; 30VDC@30A
- Trigger current : 5mA
- Optical coupling isolation, driving ability is strong, stable performance
4 Channel 24V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse
SKU: AI3684
Part Number: G3MB-202P
Operating Voltage: 24V
Power supply: 24VDC/160mA
Switching Voltage (VAC): 240@2A
Isolation: Phototriac
Add to cart
Add to Compare
2 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse
SKU: AI4139Part Number: G3MB-202P
Power supply: 3-24VDC/160mA
Switching Voltage (VAC): 240@2A
Isolation: Phototriac
7A DC 60V Adjustable Step-Down Regulator NC Power Supply Module Current Voltage Meter LCD Display(Without Case)
SKU: AI3843
QUICK OVERVIEW: 7A DC 60V Adjustable Step-Down Regulator NC Power Supply Module Current Voltage Meter LCD Display(Without Case)
- Output Voltage: 3~32V adjustable (It can save the last set voltage automatically)
- Peak Current: Recommended use in 2A, the accuracy of 1%, the minimum display 0.01A, less than 10mA will not be displayed.
- Peak Current: 3A (Recommended use in 2A, the accuracy of 1%, the minimum display 0.01A, less than 10mA will not be displayed.)
- Conversion Efficiency: 95%
- Load Regulation S(I) 0.8%
- Voltage Regulation S(U) 0.8%
RGB 5050 SMD LED Strip Flexible 5M/Roll Waterproof 12V
SKU: AI4258LED Type: 5050 SMD RGB
Length: 5 meters per roll
Power Consumption: 22.5 Watts
Operating Voltage: 12VDC
Controller Compatibility: Compatible with RGB LED controllers (not included)
Lifespan: Over 40,000 hours
Waterproof: Yes
DC-DC5-40V to 3.3V 1A Buck Step Down Converter Module without PIN
SKU: AI3000
QUICK OVERVIEW
Add to cart
Add to Compare
- Input voltage 5~40V
- Output: 3.3V
- Maximum output current 1A
- Efficiency: 76-90%
- Material: electronic component
6 Channel 3-24V Relay Module Solid State Low Level SSR DC Control DC with Resistive Fuse
SKU: AI3164- Part Number: H3MB-052D
- Working current(mA): 12.5
- Trigger Current (mA): 2
- Trigger Voltage (VDC): 3-24
- Switching Voltage (VDC): 50@2A
- Max. Load: 2A @50V AC
Green Electronic Building Blocks Big Key Button Module High Level Output
SKU: AI2933
QUICK OVERVIEW:
- Interface: Standard electronic block (GND, VCC, SIG)
- Working voltage: 2-5.5VDC
- Working Current: 0.55mA(MAX)
- Output: digital level (press high, release low)
- Great for DIY projects
3mm Two-Color LED Module
SKU: AI2511QUICK OVERVIEW:
- Operating Voltage:2.0v ~ 2.5v
- Current:10mA
- Diameter:3mm
- Wavelength:571nm + 644nm
- Beam Angle:150
Waveshare 5 Inch Resistive HDMI LCD Display 800×480
SKU: AI1561 ₹3,538.82 (₹2,999.00 + GST)- 800×480 high hardware resolution
- Resistive touch control
- Compatible and Direct-connect with any revision of Raspberry Pi
- Drivers provided (works with your own Raspbian/Ubuntu/Kali/Retropie)
- HDMI interface for displaying, no I/Os required (only touch panel still needs I/Os)
- The backlight can be turned off to lower power consumption
- High-quality immersion gold surface plating
Waveshare RGB Full-Color LED Matrix Panel, 2.5mm Pitch, 64×64 Pixels, Adjustable Brightness
SKU: AI7511Quick Overview: Waveshare RGB Full-Color LED Matrix Panel, 2.5mm Pitch, 64×64 Pixels, Adjustable Brightness
- Power Supply: 5V / 4A (VH4 header input)
- Power Consumption: ≤20W
- Resolution: 64×64 pixels
- Driving: 1/32 scan
- Pitch: 2.5mm
- Header: HUB75
4 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse
SKU: AI3683
Operating Voltage: 12VDC
Part Number: G3MB-202P
Power supply:5VDC/160mA
Trigger Voltage (VDC):12
Switching Voltage (VAC):240@2A
Isolation: Phototriac
Add to cart
Add to Compare
Epoxy WS2812B SMD LED Strip 60 LED/Meter Flexible 5M/Roll Waterproof 5V, IP65
SKU: AI3831QUICK OVERVIEW:
- 60 LEDs/m.
- Protection Grade: IP65
- 24-bit color control (8-bit PWM per channel).
- 16.8 million colors per pixel.
- One-wire digital control interface.
- Each SMD LED draws approximately 50 mA at 5 V with red, green, and blue at full brightness.
DC-DC5-40V to 6V 1A Buck Step Down Converter Module with 3PIN
SKU: AI3006- Input voltage 5~40V
- Output: 6V
- Maximum output current 1A
- Efficiency: 76-90%
- Material: electronic component
12V Warm White 5050 SMD LED Strip- 5Meter
SKU: AI2831QUICK OVERVIEW:
- LED Glow Color: Warm White
- Strip Length: 5 Meter
- Operating Voltage: 12V DC
- Strip width: 10 mm
- No. of LEDs: 60LED/Meter
- Protection Level: IP20 (Not Waterproof)
5V LCD2002 Display With Blue Backlight
SKU: AI2515 ₹323.32 (₹274.00 + GST)
QUICK OVERVIEW:
- Model: LCD2002
- Character Color: Black
- Backlight: Blue
- Supply voltage: 5V
- Dimensions:: 116 x 37 x 13.5(mm)
Mini Dry Reed Pipe Module
SKU: AI2507Quick Review:
- Operating Voltage: 3.3V to 5v
- Output Type: Digital
LCD1602 Gray without Backlight 5V
SKU: AI3541 ₹187.62 (₹159.00 + GST)- Model: LCD1602
- Character Color: Black
- Without backlit
- Supply voltage: 5V
- Dimensions (LxWxH) mm.: 80 x 36 x 10
![]DC-DC5-40V to 6V 1A Buck Step Down Converter Module (without PIN).2](https://cdn.zbotic.in/wp-content/uploads/2023/09/DC-DC5-40V-to-6V-1A-Buck-Step-Down-Converter-Module-without-PIN.2.png.webp)
DC-DC5-40V to 6V 1A Buck Step Down Converter Module (without PIN)
SKU: AI3007- Input voltage 5~40V
- Output: 6V
- Maximum output current 1A
- Efficiency: 76-90%
- Material: electronic component
![]DC-DC5-40V to 6V 1A Buck Step Down Converter Module (without PIN).2](https://cdn.zbotic.in/wp-content/uploads/2023/09/DC-DC5-40V-to-6V-1A-Buck-Step-Down-Converter-Module-without-PIN.2-1.png.webp)
DC-DC5-40V to 3.7V 1A Buck Step Down Converter Module without PIN
SKU: AI3002QUICK OVERVIEW:
- Input voltage 5~40V
- Output: 3.7V
- Maximum output current 1A
- Efficiency: 76-90%
- Material: electronic component
5V Modbus RTU 2Channels Relay Module Input Optocoupler, Isolation RS485 MCU
SKU: AI3321QUICK OVERVIEW:
- This is a relay module with two channels that supports Modbus RTU protocol. It operates on a 5V DC power supply and has a current rating of 1A. It can work in temperatures ranging from -25℃ to 85℃ and humidity levels from 5% to 95% RH.
Free Shipping
On orders above ₹999
COD Available
Min. order ₹250 for COD
GST Invoice
Available on all orders
1,50,000+ Orders
Delivered across India
Expert Support
Toll Free: 1800 209 0998
Product categories
- Show All Categories
- 3D Printers and Parts (379)
- Batteries, Chargers and Accessories (811)
- Clearance Sale (0)
- Development Boards (438)
- DIY Learning and Robot Kits (117)
- Drone Parts (1364)
- EBike parts (140)
- Electronic Components (783)
- Electronic Modules and Displays (1201)
- FPV Freestyle Mid/High KV Drone Motors (0)
- IoT and Wireless (544)
- Mechanical Parts and Workbench Tools (241)
- Motors & Drivers & Pumps & Actuators (583)
- Sensor Modules (639)
- Electronic Modules and Displays (1201)
- Character LCD Displays (2)
- Display modules (265)
- Electronic Modules (755)
- Measuring Instruments (102)
- Power Supply (62)
- Signal Generator Module & Oscilloscopes (17)