0 0
0 0
0 Shopping Cart
020 69134444
1800 209 0998
[email protected]
Help Desk
0 0
0 0
0 Shopping Cart
All departments
Return to previous page

Buy stepper motor drivers online in India at Zbotic. Our range includes A4988, DRV8825, TMC2208, TMC2209, and TB6600 stepper driver modules supporting microstepping up to 1/256. TMC drivers feature StealthChop for ultra-quiet operation. Available as individual modules and CNC shield combos. These drivers convert step/direction signals from your microcontroller into precise stepper motor coil sequences for 3D printers, CNC machines, and robotics.

2 columns grid
3 columns grid
4 columns grid
List
More
Show

In stock

ULN2003 Driver Board Stepper Motor
ULN2003 Stepper Motor Driver Module
Quick View

ULN2003 Stepper Motor Driver Board

SKU: AI0028 ₹38.00 (₹32.20 + GST)

Size: 42mmx30mm

Use ULN2003 driver chip, 500mA

Hole pitch: standard 2.54mm

A. B. C. D LED indicating the four phase stepper motor working condition

White jack is the four phase stepper motor standard jack

Power pins are separated

Add to cart Add to Compare

In stock

pyvyz7b7
Bts7960 Stepper Motor - Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module
Quick View

Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module

SKU: AI1049 ₹299.72 (₹254.00 + GST)
  • Input voltage(V): 6 – 27.
  • Maximum current(A): 43.
  • Input level(V): 3.3 – 5.
  • Duty cycle: 0 – 100%.
  • Path resistance: 16 mΩ at 25°C.
  • Low quiescent current: 7 µA at 25°C.
Add to cart Add to Compare

In stock

2rk06mep
A4988 Stepper Motor Driver Controller Board- RED
Quick View

A4988 Stepper Motor Driver Controller Board- RED

SKU: AI2782 ₹56.64 (₹48.00 + GST)

QUICK OVERVIEW:

  • Compact size, easy to install and use.
  • All jumpers hit the ON position to indicate 16 subdivisions (4988) or 32 subdivisions (8825).
  • Jm connection motor: Jv Connects 5V and 12V-24V Power Supply.
  • E /S /D /G of Jc corresponds to Enable /Step /Dir /Gnd driving signal output on the connection respectively.
Add to cart Add to Compare

In stock

z1tkbj7b
Printer Board - 3D Printer Controller Board RAMPS 1.4 for Arduino Mega Shield
Quick View

3D Printer Controller Board RAMPS 1.4 for Arduino Mega Shield

SKU: AI0311 ₹433.06 (₹367.00 + GST)

Supply Voltage: 12V

Standard interfaces (as that of the extruder)

Reserved GCI like I2C and RS232

3 MOSFET’s are applied to the heater/ fan and thermistor circuit.

Another 5A added to protect the component parts.

An 11A fuse is added to the hotbed.

Support 5 stepper drive board

 

Add to cart Add to Compare

In stock

ULN2003 Driver Module Stepper Motor Driver1
Uln2003 Module - ULN2003 Driver Module Stepper Motor Driver
Quick View

ULN2003 Driver Module Stepper Motor Driver

SKU: AI1139 ₹38.59 (₹32.70 + GST)

 

5-12V power supply

4-way signal indicator

Chip all the pins have Input leads Mounted for easy connection to use

XH-5P socket can be connected directly 28BYJ-48 Model stepper motor.

Add to cart Add to Compare

In stock

9uwavqae
MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable (Length-50 cm)
Quick View

MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable (Length-50 cm)

SKU: AI4830 ₹397.66 (₹337.00 + GST)
  • Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
  • USB power supply and peripherals power phase are separate to protect computer security.
  • All the signals are to-isolate which can protect your computer security.
  • 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.
  • Wide input voltage range: 12-24V, and with anti-reverse function.
  • One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
Add to cart Add to Compare

In stock

f5v5i56m
Tb6600 Motor 5a - TB6600 0.2-5A CNC Controller Stepper Motor Driver Single Axes Two Phase Hybrid Stepper Motor for CNC
Quick View

TB6600 0.2-5A CNC Controller Stepper Motor Driver Single Axes Two Phase Hybrid Stepper Motor for CNC

SKU: AI2617 ₹964.06 (₹817.00 + GST)

QUICK OVERVIEW:

  • Input Current: 1~5A
  • Supply Voltage: 12 to 48VDC
  • Output Current: 0.2~5.0A
  • Power (MAX): 160W
  • Temperature: -10～45℃
  • H bridge bipolar constant current drive.
Add to cart Add to Compare

In stock

ss8eip3x
L9110s Stepper Motor - L9110S DC Stepper Motor Driver Board
Quick View

L9110S DC Stepper Motor Driver Board

SKU: AI4690 ₹40.36 (₹34.20 + GST)

L9110S DC Stepper Motor Driver Board:

  1. L9110S-chip motor drive
  2. Supply voltage: 2.5-12V
  3. The maximum operating current of 0.8A
  4. Drive two DC motors or a 4-wire 2-phase stepping motor.
  5. Ultra-small size, suitable for assembly
Add to cart Add to Compare

In stock

USB Interface MACH3 Motion Control Card Flying Carving Card +USB Cable+CD
Quick View

USB Interface MACH3 Motion Control Card Flying Carving Card +USB

SKU: AI5976 ₹974.68 (₹826.00 + GST)
  1. Compatible in windows 7/8/10.
  2. Support auto-zero
  3. The driven shaft automatically adjusts to zero
  4. Support automatic knife
  5. Support emergency stop input
  6. Support limit switch access
Add to cart Add to Compare

In stock

L9110 Board - L9110 L9110S DC Stepper Motor Driver Board HBridge
Quick View

L9110 L9110S DC Stepper Motor Driver Board HBridge

SKU: AI2225 ₹51.68 (₹43.80 + GST)
QUICK OVERVIEW:
  •  Power supply voltage: DC2.5-12V
  •  Each channel has 800mA continuous current output
  •  Low saturation pressure drop
  •  TTL/CMOS output level compatible can be connected directly to the CPU
  •  Control and drive integrated into IC
  •  Have pin high-pressure protection function
Add to cart Add to Compare

In stock

Green A4988 driver Stepper Motor Driver- Normal Quality
Quick View

Green A4988 driver Stepper Motor Driver- Normal Quality

SKU: AI5941 ₹77.88 (₹66.00 + GST)
  1. Supply Voltage : 8-35 VDC.
  2. Current : 1.0A  (no heatsink ).
  3. Current : 2.0A (with heat-sinking).
  4. logic input : 3 – 5.5V .
  5. Automatic current decay mode detection / choice.
  6. Mixed with slow current decay mode.

 

Add to cart Add to Compare

Out of stock

A4988 driver Stepper Motor Driver- Normal Quality
Out of Stock
A4988 Module - Stepper Motor Driver
Quick View

A4988 Stepper Motor Driver Module

SKU: AI0199 ₹112.10 (₹95.00 + GST)

Quick Overview

  • Supply Voltage : 8-35 VDC.
  • Current : 1.0A (no heatsink ).
  • Current : 2.0A (with heat-sinking).
  • Logic input : 3 – 5.5V .
  • Automatic current decay mode detection / choice.
  • Mixed with slow current decay mode.
Add to Compare

Out of stock

l4hswjfs
Out of Stock
Drv8825 Motor - DRV8825 Stepper Motor Driver with Aluminum Heat Sink(High current limiting resistance).
Quick View

DRV8825 Stepper Motor Driver with Aluminum Heat Sink(High current limiting resistance).

SKU: AI0231 ₹100.30 (₹85.00 + GST)

Quick Overview

  • Supply Voltage: 8.2 – 42 VDC.
  • Current Capacity : 2.2A max(24V).
  • Continuous current per phase: 1.5 A.
  • Minimum Logic voltage: 2.5V.
  • Logic Voltage: 5V.
  • Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
  • Dimensions : 15 x 20 mm.
  • Weight: 4 gm.
Add to Compare

Out of stock

auhtyi28
Out of Stock
DRV8833 2 Channel DC Motor Driver
Quick View

DRV8833 2 Channel DC Motor Driver

SKU: AI0965 ₹64.90 (₹55.00 + GST)

Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor.

Operating voltage: 2.7‌‌ V to 10.8 V

Output current: 1.2 A continuous (2 A peak) per motor.

Inputs are 3V- and 5V-compatible.

Add to Compare

Out of stock

IMG_8242
Out of Stock
Tmc2208 Module - TMC2208 Stepper Motor Driver Module
Quick View

TMC2208 Stepper Motor Driver Module

SKU: AI0537 ₹245.44 (₹208.00 + GST)

Quick Overview

  • Version:  TMC2208 V3.0
  • Input Voltage range:  5V-36V
  • Maximum Current:  1.4A
  • Logic Voltage:  3.3V/5V
  • MicroStep:  upto 1/256
Add to Compare

Out of stock

v0jvdkmw
Out of Stock
Tb6600 Motor - TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
Quick View

TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis

SKU: AI0998 ₹310.34 (₹263.00 + GST)
Input Current: 0~5A Output Current: 0.5~4.0A Control Signal: 3.3~24V Power (MAX): 160W Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32 Temperature: -10～45℃ H bridge bipolar constant current drive.
Add to Compare

Out of stock

AI0281.1
Out of Stock
Mach3 Board - MACH3 Interface Board
Quick View

MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable (Length-1.5m)

SKU: AI0281 ₹460.20 (₹390.00 + GST)
Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software. USB power supply and peripherals power phase are separate to protect computer security. All the signals are to-isolate which can protect your computer security. 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc. Wide input voltage range: 12-24V, and with anti-reverse function. One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.  
Add to Compare

Out of stock

3h8cjpvo
Out of Stock
DM556 Digital Stepper Motor Driver
Quick View

DM556 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories

SKU: AI5221 ₹913.32 (₹774.00 + GST)
  1.  Maximum current: 7.2A, resolution: 0.1A
  2.  Subdivision range: 400~25600ppr
  3.  Impulse response frequency: 200KHz
  4.  DC power supply
  5.  The input voltage range: 24~80VDC or AC both OK;
  6.  Power supply is greater than 200W. Recommend 48VDC or 48V AC
  7.  Operating Temperature: -10℃~45℃
Add to Compare

Out of stock

Aluminum Heatsink for A4988 DRV8825 Stepper Motor Driver – 5Pcs
Out of Stock
A4988 Stepper Motor - Aluminum Heatsink for A4988 DRV8825 Stepper Motor Driver
Quick View

Aluminum Heatsink for A4988 DRV8825 Stepper Motor Driver –(Pack of 5)

SKU: AI1399 ₹26.79 (₹22.70 + GST)
  • Product Name: Aluminum Heatsink for A4988 DRV8825 Stepper Motor Driver
  • Material: Aluminum
  • Color: white
  • Teeth Number: 5 Teeth
  • Dimensions: 9 x 9 x 5 (LxWxH) mm
  • They have good thermal conductivity.
  • Very lightweight.
Add to Compare

Out of stock

6721-01
Out of Stock
DRV8825 Stepper Motor Driver with Aluminum Heat Sink.( Lower current limiting resistance)
Quick View

DRV8825 Stepper Motor Driver with Aluminum Heat Sink.( Lower current limiting resistance)

SKU: AI2879 ₹103.84 (₹88.00 + GST)
QUICK OVERVIEW:
  • Supply Voltage: 8.2 – 42 VDC.
  • Current Capacity : 2.2A max(24V).
  • Continuous current per phase: 1.5 A.
  • Minimum Logic voltage: 2.5V.
  • Maximum Logic Voltage: 5V.
  • Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
  • Dimensions : 15 x 20 mm.
  • Weight: 4 gm.
Add to Compare

Out of stock

3py5hb21
Out of Stock
A4988 Stepper Motor 1.5a - Original Chip with Retail Package Red A4988 Stepper Motor Driver (with Heatsink,1.5A)
Quick View

Original Chip with Retail Package Red A4988 Stepper Motor Driver (with Heatsink,1.5A)

SKU: AI2551 ₹126.26 (₹107.00 + GST)
QUICK OVERVIEW:
  • Supply Voltage : 8-35 VDC.
  • Current : 1.0A  (no heatsink ).
  • Current : 2.0A (with heat-sinking).
  • logic input : 3 – 5.5V .
  • Automatic current decay mode detection / choice.
  • Mixed with slow current decay mode.
Add to Compare

Out of stock

gmk6oj8q
Out of Stock
Tb6600 Motor 50v - TB6600 Stepper Motor Driver Controller 8~50V 4.5A
Quick View

TB6600 Stepper Motor Driver Controller 8~50V 4.5A

SKU: AI2618 ₹599.44 (₹508.00 + GST)
QUICK OVERVIEW:
  • Supply Voltage:  8V – 50V DC (36V recommended).
  • Output current: 0.3A – 4.5A (peak value of 5A).
  • Micro Step: 1, 2, 8, 16.
  • Maximum PWM frequency: 200kHz.
  • Adjustments for the maximum current of the LED: 1A, 2.2A, 3.3A, 4.5A.
  • Operating temperature: -10 to + 45 ° С.
Add to Compare

Out of stock

vq0qlv8m
Out of Stock
Tb6560 Board - TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
Quick View

TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor

SKU: AI2616 ₹431.88 (₹366.00 + GST)
QUICK OVERVIEW:
  • Driver Chip: TB6560AHQ
  • Operating Voltage: 10-35V
  • Nominal Voltage: 24V
  • With the large heat sink to ensure good heat dissipation
  • 6N137 high-speed OptoCoupler, to ensure a high speed without step out.
Add to Compare

Out of stock

TL-Smoother Eight Chip Module DFORCE Vibration Pattern Filter with Cable......
Out of Stock
Tl Smoother Eight Module - TL-Smoother Eight Chip Module DFORCE Vibration Pattern Filter with Cable
Quick View

TL-Smoother Eight Chip Module DFORCE Vibration Pattern Filter with Cable

SKU: AI1128 ₹159.30 (₹135.00 + GST)
  TL Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors, The TL-Smoother is an addon module for 3D printer stepper motor drivers. The board provides flyback diodes for the motor outputs, so they are also protected against inductance voltages in the unpowered state of the driver. You will get smoother movement, especially on the delta-style 3D printer I3 and UM models can also be used, and different machines will have different clipping effects.
Add to Compare

Out of stock

Cytron Maker Drive H-Bridge Motor Driver2
Out of Stock
Cytron Maker Drive Motor - Cytron Maker Drive H-Bridge Motor Driver
Quick View

Cytron Maker Drive H-Bridge Motor Driver

SKU: AI1104 ₹399.00 (₹338.14 + GST)
  Dual channel, Bi-directional control motor driver Support motor voltage from 2.5V to 9.5VDC Maximum current up to 1.0A continuous and 1.5A peak (<5 seconds) 5V Output (200mA) to power the controller. Inputs compatible with 1.8V, 3.3V and 5V logic (Arduino, Raspberry Pi, etc). Solid state components provide faster response time and eliminate the wear and tear of mechanical relay Regenerative Braking
Add to Compare

Out of stock

A4982SLPTR-T TSSOP
Out of Stock
A4982slptr-t Tssop - A4982SLPTR-T
Quick View

A4982 Allegro Splitter (A4982SLPTR-T TSSOP)

SKU: AI0885 ₹1,102.12 (₹934.00 + GST)
  Operating Temperature : -20°C ~ 150°C (TJ) Mounting Type: Surface Mount Package / Case : 24-TSSOP (0.173", 4.40mm Width) Exposed Pad Supplier Device Package :24-TSSOP-EP
Add to Compare