Buy lithium batteries, chargers, and battery accessories online in India at Zbotic. We offer an extensive selection of LiPo, Li-Ion, and LiFePO4 batteries from 3.7V single-cell packs to 25.2V high-voltage configurations, along with balance chargers from SkyRC, ISDT, and Ultra Power. Our inventory also includes battery protection boards (BMS), connectors, harnesses, silicone and PVC wires, power adapters, coin cells, and battery holders. Everything you need for drone builds, RC vehicles, robotics, IoT projects, and custom battery pack assembly — all at affordable prices with warranty and fast delivery across India.
18650 Battery Holder – 2 CELL
SKU: AI0117 ₹16.17 (₹13.70 + GST)Quick Overview
- Wire Length: 15 cm.
- Output: 7.2v.
- Dimension (Approx.) : 76 x 40 x 20 mm
- Weight: 12gm
- High-quality plastic material
Battery Snapper Connector 9V + DC Jack
SKU: AI0020Quick Overview:
- Hard Plastic T-type connector
- Material: ABS
- Length: 15cm
- Stripped and Tinned leads, 1 red and 1 black
- Plug Type: 2.1 x 5.5mm Male to 9V Battery Clip Material
- Buckle Line Interface Material: tinned copper buckle 7*0.12. Length of lines: 13.5cm
- Size of DC Connector: 2.1mm*5.5mm
XT-60 Male&Female ConnectorColor:yellow
SKU: AI4445 ₹30.21 (₹25.60 + GST)- Color: Yellow
- Current capacity: 60 – 65 amp
- Material: Nylon and Gold Platings
20CM Male to Male Breadboard Jumper Wires 2.5MM – 40Pins
SKU: AI0380 ₹68.44 (₹58.00 + GST)
QUICK OVERVIEW
Add to cart
Add to Compare
- 40P color DuPont line
- Length: 200mm
- Weight: 30 gm
- 1p-1p pin header, Male to Male
- A row of 40 root
- Durable and reusable
- Easy to install and use
5V Step-Up Power Module Lithium Battery Charging Protection Board
SKU: AI0013 ₹25.25 (₹21.40 + GST)BAT Discharging Stop Voltage:2.9V
Discharging Efficiency:85%(input 3.7V output 5V/1A)
Charging and discharging indication
Internally installed charging and discharging power MOS
Preset 4.2V charging voltage, precision ±1%
Max 8uA standby current
Integration charging management and discharging management
Intelligent temperature control and overtemperature protection
Integration output overvoltage protection, short circuit protection, overload protection
USB to DC Cable (Power Cable for Arduino Uno and Mega )1 meter
SKU: AI0446- Color – Black
• Cable Length – 1 Meter
• Wire Thickness – 3.5 mm
• Wire Material – LD
• Core – 2
• Core Wire 12-40
• Core Material – Copper
18650 X 4 Cell Battery Holder For Lithium-Ion
SKU: AI0701Hold 4 standard 18650 batteries.
Wire Length: 15 cm.
Output: 14.8 V.
Dimension (Appro.) : 80 x 76 x 18 mm.
Weight: 28 gm.
High-quality plastic material
3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection Board-Good Quality
SKU: AI1052 ₹64.90 (₹55.00 + GST)Quick Overview:
- Product Name: 3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection Board-Good Quality
- Three series of lithium battery protection board.
- Automatically cancel protection after protection conditions restore.
- Suitable for lithium battery pack of 11.1V, 12V, 12.6V.
- Quiescent current < 30uA, so power consumption is small.
- With the function of overcharge protection, over discharge protection, short circuit protection, over-current protection.
USB 2.0 A Male to Mini-B Male Cable-1m
SKU: AI0366 ₹41.89 (₹35.50 + GST)Quick Overview
- Connector A: Male USB A
- Connector B: Male USB Mini B
- Length: 1m
- USB Type: 2.0
1S 12A 3.6V BMS Battery Protection Board for Li-ion Cell
SKU: AI2160 ₹49.32 (₹41.80 + GST)Quick Overveiw:
- Overcharge protection
- over-discharge protection
- short circuit protection
- overcurrent protection
- MOS: 6 MOS Transistor
RJ45 CAT5 0.8M Ethernet Patch LAN Cable
SKU: AI3485QUICK OVERVIEW:
- Gold plated connectors
- Type: Patch cable
- Connector A: RJ-45 – male
- Connector B: RJ-45 – male
- Color: Blue
22AWG extrasoft Silicone Wire (length: 2m)
SKU: AI4534 ₹30.44 (₹25.80 + GST)Color : Red
Length : 2m
Gauge : 22 AWG
Rated Voltage: 600V
Rated Temperature: -60°C~+200°C
Conductor: Tinned Copper
Conductor construction: 60/0.08
Insulation: Silicone Rubber
Note: Wire will also made avaitlable as per requirement
USB Cable For Arduino UNO/MEGA-30cm
SKU: AI0079 ₹32.92 (₹27.90 + GST)USB Type: Type-A to Type-B
Cable Length: 30 cm
Shielding: Aluminum under-mold shield
Compatibility: Fully compatible with PCs
Compliance: Meets FCC requirements on KMI/RFI interference
Micro USB Cable for ESP32-1 mtr
SKU: AI0921 ₹38.23 (₹32.40 + GST)Length: 1 meter
Connector 1: Standard USB Type-A
Connector 2: Micro USB Type-B
Compatibility: Designed for use with ESP32 microcontrollers
4S 18650 Li-po Lithium Battery Capacity Indicator Module
SKU: AI0667Quick Overview
- Color Display
- Reverse Connection Protection
- Wide Variety of application
XT90 Connector Male-Female Pair
SKU: AI0545 ₹81.42 (₹69.00 + GST)Quick Review:
- Connector type: XT90 Male-Female pair
- Metal connector size: 4.5 mm
- Housing shape provides protection against shorting and reverse polarity
- Can accept up to 8AWG wires
- Able to sustain 90A+ continuous current
CR2032 3V Lithium Coin Battery
SKU: AI0828 ₹16.40 (₹13.90 + GST)
High and Stable voltage (3V)
A full line up for use in a wide variety of applications
No mercury added
Useful in a wide range of temperatures (-30°C to +60°C)
Very high weight-to-power ratio
Manganese dioxide material
High capacity long Lasting life.
Low self-degradation rate and superior storability
Add to cart
Add to Compare
3.7V Lithium Battery Protection Board for Polymer 18650 Bonding Pad (can Spot/Weld) 3A Overcurrent Value
SKU: AI0499 ₹12.51 (₹10.60 + GST)
Overcharge voltage: 4.25±0.05V
Overcharge release voltage:4.23±0.05V
Over discharge voltage:2.54±0.1V
Maximal continuous charging current: 2A
Add to cart
Add to Compare
LilyPad Coin Cell Battery Holder CR2032 Battery Module
SKU: AI3426QUICK OVERVIEW:
- Model: LilyPad
- Colour: Purple
- Material: CCL
- Dimensions: 30 x 30 x 6 (LxWxH) mm.
- Weight: 3 gm.
Wire Stripper Flat Nose Cable Cutter with Practical Punch Down Tool
SKU: AI5257 ₹17.35 (₹14.70 + GST)- Color: Yellow
- Material: ABS Stainless Steel
- Length: 92 mm
- Weight: 10 gm.
- It works great and strips smoothly and cleanly.
- This wire stripper is small and exquisite, which is very convenient and practical.
6S AB Clip Buckle / Charger Wire protector (Pack of 5)
SKU: AI4503 ₹60.18 (₹51.00 + GST)Features: 6S AB Clip Buckle / Charger Wire protector (Pack of 5)
- Prevent damages the balance connector by grabbing and pulling the wires
- Convenient for insert or unplug the balance connector.
- An add-on to the JST-XH connector to prevent damages resulted from frequent connection processes.
- Extremely useful in RC airplane and multi-copter.
18650 5V 2.4A Lithium, Battery Digital Display, Charging Module Dual, USB Output Band, Display Booster, Mmodule
SKU: AI3360 ₹174.64 (₹148.00 + GST)- Input:5V 2.1A
- Output:5V/1A or 5V/2.4A(Quick Charge )
- Protect Function: Overcharging; Overdischarging and overload protection
Black 2 X CR2032, Button Battery Case, with Wire and Toggle, Switch
SKU: AI2977 ₹40.36 (₹34.20 + GST)
QUICK OVERVIEW:
- Product Name: 6V Battery Case With On/Off Switch
- Type: Wire Lead Type
- Fit Battery Model: CR2032
- Available Battery Quantity: 2
- Material: Plastic, Metal
- Outside Diameter: 32.5mm
5V 2A Wireless Power Supply Transmitter Receiver Charging Coil Module
SKU: AI0541 ₹503.86 (₹427.00 + GST)Model: XKT-412.
Input Voltage: 12V.
Output Voltage: 5V.
Operating Current: 1.2-2 A.
Receive Coil: 3mm, the receiver output 5V / 1A current
Normal Use Distance: 2 ~ 10mm
Operating Current: 1.2-2 A.
16AWG extrasoft Silicone Wire (1m)
SKU: AI4688 ₹50.74 (₹43.00 + GST)- Rated Voltage: 600V
- Rated Temperature: -60°C~+200°C
- Conductor: Tinned Copper
- Conductor construction: 252/0.08
- Insulation: Silicone Rubber
- Length: 1 m
- wire size:16AWG
- color: red
Note: Wire will also made available as per requirement
18650 x 2 Battery Holder with Cove and On/Off Switch with DC Jack
SKU: AI0930 ₹74.34 (₹63.00 + GST)Holds 2 x 18650 batteries.
With a cover and locking.
Comes with an ON/OFF switch.
It also includes DC Jack.
Easy install, convenient to use.
XH-M603 Charging Control Module with LED Display
SKU: AI0564 ₹207.68 (₹176.00 + GST)Quick Overview:
- Model: XH-M603 / HW-632
- Input Voltage: DC 10–30V
- Display Precision: 0.1V
- Control Precision: 0.1V
- Output Type: Direct output
HX-2S-A2 Circular 2S 8.4V BMS 18650 Lithium Battery Protection Plate
SKU: AI2083 ₹45.90 (₹38.90 + GST)- Overcharge voltage range: 4.25-4.35v ± 0.05v
- Charging voltage: 8.4V-9V
- Upper limit operating current: 5A
- Upper limit instantaneous current: 7A
- Quiescent current: less than 10uA
- Internal resistance: less than 300mΩ
TP5000 3.6V/4.2V 1A Lithium Battery Charger Module
SKU: AI1170 ₹75.52 (₹64.00 + GST)
Single Battery Charger Module
Programable Charge Curren Form 0.1A to 2A
Programable Precharge Current Form 10% to 100%
Based on Tp5000 Battery Charger IC
XH-M601 12V Battery, Charging Control Board, Intelligent Charger Power, Control Panel Automatic, Charging Power
SKU: AI5269 ₹145.14 (₹123.00 + GST)
This XH-M601 Battery Charging Control Board 12V Intelligent Charger Power Supply Control Module Panel Automatic Charging/Stop Power. Potentiometer Adjustment: RP1:...
Add to cart
Add to Compare
3 X 6 18650 Battery Holder with 18.5MM, Bore Diameter
SKU: AI3111
QUICK OVERVIEW:
- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
Testing Connector Alligator Clip Length 28mm NC101 Red
SKU: AI4015 ₹3.92 (₹3.32 + GST)Alligator Clip Length (without silicone cover): approx 28mm
Housing: Insulating paste resin
Insulating Material: Silicon
Withstand voltage: 300V~5A; Rated current: 10A
The thickness of clip: about 0.5mm; Opening range of clip: 10mm
Small alligator clip: except the length of the rubber sleeve is 2.8CM, the width of the clip is 4MM crocodile clip + thicken protective insulation sleeve
43mm Round Small Single Test Hook Clip Test Probe Red
SKU: AI2113Product: Test Hook Clip Test Probe
Color: Red
Total Length: 43mm (Approx. 1.7 inches)
Overall Length: Approx. 4.2 cm
Cell Holder 18650 1X3 (Pack of 4)
SKU: AI0458 ₹25.96 (₹22.00 + GST)
QUICK OVERVIEW
Add to cart
Add to Compare
- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Dimension: 60 x 20 x 8 mm (LxWxH) (without lock slots).
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
3 x 1.5V AAA Battery Holder Without Cover
SKU: AI2893QUICK OVERVIEW
- Cell Quantity: 3
- Battery type: AAA.
- Storage temperature: 25ºC.
- Max Operate temperature: 80ºC.
CN3791 12V MPPT Solar Charger Module
SKU: AI3455 ₹244.26 (₹207.00 + GST)
QUICK OVERVIEW
- Maximum Power Point Tracking (MPPT) Solar Charger Module
- 2-Pin JST Connectors for Solar Panel and Battery Connection
- PWM Switching Frequency of 300KHz
- Maximum Charging Current of 2A
3S 18650 Lithium Battery Capacity Indicator Module Level Tester LED
SKU: AI0670Quick Overview
- The intelligent power display panel
- Static power consumption 2~3 mA
- Colour Display
- Wide Variety of application
Anti-skid T Plug Male & Female Connector
SKU: AI4448- Deans T plug Deans ultra Plug for remote-controlled cars.
- Female + Male
- Rate:60-75A
- Male Plug – Dimension: 13mm x 7.5mm x 19mm
- Female Plug – Dimension: 13mm x 7.5mm x 15mm
5.5mm Male&Female Gold Bullet Banana Connector
SKU: AI4440 ₹42.60 (₹36.10 + GST)- 1 male and 1 female gold bullet banana connector
- Size: 5.5 mm
- Material: Brass
- Plating: Gold
18650 SMD/SMT High-Quality Single Battery Holder
SKU: AI1455QUICK OVERVIEW
- Product Name: 18650 SMD/SMT High-Quality Single Battery Holder
- Lightweight and Easy to Mount on PCB
- Gold plated brass Contact Points
- Best Body Material and Build Quality
- Good environmental and Temperature resistance
3S 12V 25A 18650 Lithium Battery Protection Board
SKU: AI1045 ₹107.38 (₹91.00 + GST)Overcharge Voltage Range: 4.25-4.35V ± 0.05V
Over Discharge Voltage Range: 2.3-2.7V ± 0.05V
Operating Temperature: -40°C to +50°C
Storage Condition: -40°C to +80°C
Quiescent Current: Less than 30μA
Balance Current: Approximately 40-50mA
Mini Solar Lipo Charger Board
SKU: AI2775QUICK OVERVIEW:
- Supermini Solar Lipo charger based on the CN3065
- Can Charge Single Lithium-ion Polymer cell with Max charging current 500 mA
- 2-pin JST Connector Interface
- Supports USB Charge
6S 20A Li-ion Lithium Battery 24V 18650 Charger Protection Board Module
SKU: AI2167 ₹297.36 (₹252.00 + GST)Charging voltage: 25.5V
Charging current: 20A (MAX)
Overcharge detection voltage: 4.28 ± 0.05V
Overcharge protection delay: 0.1S
Overcharge release voltage: 4.08 ± 0.05V
Over discharge detection voltage: 2.55 ± 0.08V
Overdischarge detection delay: 0.1S
The overdischarge release voltage: 2.9 ± 0.1V
30AWG extrasoft Silicone Wire (length:5m)
SKU: AI4538Wire Size: 30AWG
Color: red
length: 5m
Rated Voltage: 600V
Rated Temperature: -60°C~+200°C
Conductor: Tinned Copper
Conductor construction: 11/0.08
Insulation: Silicone Rubber
Note: Wire will also made available as per requirement
Plastic Covered Battery Cell Holder For 3 X AA Battery with On/Off Switch
SKU: AI2887 ₹44.37 (₹37.60 + GST)QUICK OVERVIEW:
- Holds 3 AA batteries
- With a cover and fixed screw
- With an ON/OFF switch
- Dimensions mm (LxWxH): 68 x 48 x 18
- Weight: 26 gm
- Material: Plastic
- Internal Connection: Series
9V HW Battery For Arduino/ DIY/ Robotics
SKU: AI0082 ₹40.12 (₹34.00 + GST)Quick Overview :
- Product Name: 9V HW Battery For Arduino/ DIY/ Robotics
- Constant 9V Output till lasts
- Metal Jacket Body
- Good Built Quality and hence Leakproof
- Easy to install and Replace
- Corrosion free Connector Point for long-term use
- 0% Mercury and Cadmium. Environment-friendly
- OEM Compatible.
PCB BMS 6 Series 22V 18650 Lithium Battery Protection Board
SKU: AI3460 ₹107.38 (₹91.00 + GST)QUICK OVERVIEW:
- Model: 6 string 22V lithium battery protection board.
- Maximum operating current: Within15A.
- Charging current: Within 15A.
XH2.54mm 5Pin Single-headed Connect Wire 1007 26AWG 20cm
SKU: AI4029Quick Overview
- Name: Connector Plug With Wires
- Model: XH 2.54mm
- Fuel Source: Electric
- Pitch: 2.54mm
- Length: 200mm(20cm)
- Wire Size: 26AWG 1007
2 X 6 18650 Battery Holder with 18.5MM, Bore Diameter
SKU: AI3077QUICK OVERVIEW:
- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
White Type C cable – 1m for Arduino Nano V3.0
SKU: AI5970 ₹52.04 (₹44.10 + GST)- Product: White Type C cable -1m for Arduino Nano V3.0
- Type: USB type 2.0 to USB type c
- Color: White
3 x 1.5V AAA battery holder with cover and On/Off Switch
SKU: AI2896QUICK OVERVIEW:
- Holds 3 AAA batteries
- With a cover and Locking
- Comes with an ON/OFF switch
- Cable length: 15cm
- Internal Connection: Series.
3516 Chip Type-C USB QC4.0 QC3.0 6V-35V Mobile Phone Quick Fast Charge Adapter Module
SKU: AI4130- Input voltage range: 6V to 35V
- Output voltage: 5V
- Conversion efficiency: 90% to 97%
12V 8 x AA Battery Clip Slot Holder Stack Box Case
SKU: AI2892 ₹55.46 (₹47.00 + GST)QUICK OVERVIEW:
- Holds 8 AA batteries
- Easy install, convenient to use.
- Dimensions mm (LxWxH): 62 x 58 x 30
- Weight: 22 gm
- Material: Plastic
- Internal Connection: Series
2S 5A 8.4V 18650 Lithium Battery Charger Board Protection Module
SKU: AI3439 ₹54.28 (₹46.00 + GST)QUICK OVERVIEW:
- Input Voltage: 8.4 – 9V.
- Overcharge Detection Voltage: 4.25-4.35V±0.05V.
- Over-Discharge Detection Voltage: 2.3-3.0V±0.05V.
- Maximum Working Current: 5A.
- Transient Current: 7A.
1S 3.7V 3A 2MOS BMS Li-ion 18650 Battery Protection Board
SKU: AI3457
QUICK OVERVIEW:
- Charging voltage: 3.7V
- Overcharge Detection Voltage: 4.25 ± 0.05V
- Overcharge release voltage: 4.23 ± 0.05V
- Over discharge detection voltage: 2.45 ± 0.1V
- Upper Limit Continuous Current: 5A
XT60 Male Connector With 10CM 14AWG Silicone Wire
SKU: AI4484 ₹82.60 (₹70.00 + GST)- Connector Type: XT60 Male
- Material of Connector: High-Temp nylon
- Length: 10 cm.
- Cable Thickness: 14AWG
- High-Quality Connector
- Designed for heavy-duty
- High Power Application
18650 x 1 BLM Cell Box, with Pin, Without Cover
SKU: AI3520 ₹27.49 (₹23.30 + GST)QUICK OVERVIEW:
- Product: 18650 x 1 BLM Cell Box, with Pin, Without Cover
- Material: High-quality plastic material
- Color: Black
- Battery type: 18650.
- Easy to use
6 Pin Relimate Cable Connector Female – 2.54mm Pitch (Pack of 2)
SKU: AI0422Quick Overview
- Connector: JST-VH Female
- Wire Length: 20cm
- 2.54mm Pitch
- 6 Pin
- Solid and durable
4 Series 40A 18650 Lithium Battery Protection Board 14.8V 16.8V with Balance for Drill Motor Lipo Cell Module
SKU: AI3445 ₹127.44 (₹108.00 + GST)The Successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 cannot start the drill!!)
Strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.
1S 18650 Li-po Lithium Battery Capacity Indicator Module
SKU: AI3453QUICK OVERVIEW:
- Colour Display
- Reverse Connection Protection
- Wide Variety of application
20MM CR2032 Battery Button Cell Holder-2Pcs.
SKU: AI5211
20MM CR2032 Battery Button Cell Holder is surface and through-hole-mount battery holders are a smart choice for cost-sensitive, space-constrained applications involving computers, remote controls, and other compact electronics.
Add to cart
Add to Compare
5 X 6 18650 Battery Holder with 18.5MM Bore Diameter
SKU: AI3353 ₹56.64 (₹48.00 + GST)
QUICK OVERVIEW:
- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
24V Two Wire Digital Display Battery Level Indicator
SKU: AI2368Material: Plastic and Metal
Shell Color: Black
Digital Color: Outline Red, Display Block Blue
Voltage Compatibility: 24V
Installation: Two-wire connection
Protection: Reverse polarity protection
18650 x 3 BLM Cell Box, With Pin, Without Cover
SKU: AI3137 ₹71.98 (₹61.00 + GST)Product: 18650 x 3 BLM Cell Box, with Pin, Without Cover
Hold 3 standard 18650 batteries.
Voltage: 7.4 Volts, 3.7 Volts, 14.8 Volts
2 x 21700 Battery Holder with 21.75MM Bore Diameter
SKU: AI3357 ₹4.25 (₹3.60 + GST)- Model: 21700 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 21.75MM
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
2 X 18650 Black Battery Holder with DC Power Plug
SKU: AI2901 ₹44.49 (₹37.70 + GST)QUICK OVERVIEW:
- Holds two 18650 batteries
- The standard 5.5×2.1mm barrel jack at the output.
- Easy install, convenient to use.
- Weight: 18 gm
- Material: Plastic
- Internal Connection: Series
5 Pin Relimate Cable Connector Female – 2.54mm Pitch (Pack of 2)
SKU: AI0425- Connector Type: JST-VH
- Number of Pin: 5
- Variant: Female
- Pitch: 2.54mm
- Wire Length: 25cm
2S 18650 Lithium Battery Capacity Indicator Module Level Tester LED
SKU: AI3351QUICK OVERVIEW:
- The intelligent power display panel
- Static power consumption 2~3 mA
- Colour Display
- Wide Variety of application
Amass MT30 3 Pole Motor/ESC Connector Set Female – 1 Pcs.
SKU: AI5897- Brand: Amass
- Dimensions: 20 x 10 x 10mm (assembled)
- Weight: 2.96g
- Suitable for: 16AWG wire (Max)
- Color: Yellow
- Gender: Female
- Gold Plated Connector
- High-Quality Material
1S 5A 18650 Lithium Battery Protection Board
SKU: AI3180 ₹37.05 (₹31.40 + GST)QUICK OVERVIEW:
- Small size designed for a four-cell battery pack.
- Over-charge/Over-discharge Protection.
- Pre-soldered Nickel Strip ready to mount on battery.
5V 0.6A USB Booster Cable DC5.5*2.1MM,9V
SKU: AI4212 ₹60.18 (₹51.00 + GST)Cable Length: 1 meter
DC Pin Polarity: Outer pin negative, inner positive
Connector Size: 5.5mm outer diameter, 2.1mm inner diameter
Great for short distance connection
Simply & Professional appearance for cabling
Easier for installation save time and money
Easy to use.
4 x 1.5V AAA Battery Holder Without Cover
SKU: AI3135 ₹25.72 (₹21.80 + GST)- Cell Quantity: 4.
- Battery type: AAA.
- Storage temperature: 25ºC.
- Max Operate temperature: 80ºC.
USB to Parallel Port (36 Pin) Converter Adaptor
SKU: AI0586QUICK OVERVIEW
- Type: Premium Cable
- For Computer
- For Interface
28AWG extrasoft Silicone Wire (length:5m)
SKU: AI4537- Rated Voltage: 600V
- Rated Temperature: -60°C~+200°C
- Conductor: Tinned Copper
- Conductor construction: 16/0.08
- Insulation: Silicone Rubber
- Length: 1m
- Wire Size: 28AWG
- Color: red
Note: Wire will also made available as per requirement
PH-A/AW-2.5mm-4 pin Female Housing Connector with 300mm Wire(28 AWG)
SKU: AI6333 ₹14.04 (₹11.90 + GST)
PH-A/AW-2.5mm-4 pin Female Housing Connector with 300mm Wire(28 AWG):
Add to cart
Add to Compare
- MPN: PH-Y
- Brand: BOYU
- Rated Current: 2A AC, DC (AWG #24)
- Rated Voltage: 250V AC, DC
- Contact Resistance: 10MQ max
- Insulation Resistance: 1000M min
- Withstanding Voltage: 800V AC/minute
- Temperature Range: -25°C to +85°C
1M Nickel Strip 2P 0.15 * 27mm Nickel Strip For 18650 Lithium Battery Welding Tape
SKU: AI1441 ₹97.94 (₹83.00 + GST)
QUICK OVERVIEW
Add to cart
Add to Compare
- Material: Nickel-Plated Steel
- Optional Type and Size: 2P
- Thickness: 0.15mm
- Width: 27mm
- Spacing: 20.25mm
- Length: 1m/3.2ft
- Color: Nickel
Black CR1220 Button Battery Straight Socket
SKU: AI4121Battery Compatibility: CR1220 button battery
Socket Type: Straight socket
Color: Black
Material: Durable plastic
Alligator (Crocodile) Clips -Black(Pack of 10)
SKU: AI0200Quick Overview
- Length: 35 mm
- Weight: 8g Each
- Color: Black
- Insulating Material: Silicon
4S 10A 18650 Lithium Battery Protection Board
SKU: AI1053 ₹138.06 (₹117.00 + GST)This protection board is suitable for 4 series Li-ion cell.
Adopt a precision integrated circuit for fast and safe charging.
Support overcharge protection, over-discharge protection, and short circuit protection.
This product has gone through load and ageing test for quality assurance.
230m P/N B-30-1000 Insulated PVC Coated 30AWG Wire Wrapping Wire-RED
SKU: AI3467 ₹354.00 (₹300.00 + GST)QUICK OVERVIEW:
- Colour: RED
- Length: 230m
- Outer diameter of single core wire 0.55mm
- Diameter of Copper core 0.25mm
Free Shipping
On orders above ₹999
COD Available
Min. order ₹250 for COD
GST Invoice
Available on all orders
1,50,000+ Orders
Delivered across India
Expert Support
Toll Free: 1800 209 0998
Product categories
- Show All Categories
- 3D Printers and Parts (379)
- Batteries, Chargers and Accessories (811)
- Clearance Sale (0)
- Development Boards (438)
- DIY Learning and Robot Kits (117)
- Drone Parts (1364)
- EBike parts (140)
- Electronic Components (783)
- Electronic Modules and Displays (1201)
- FPV Freestyle Mid/High KV Drone Motors (0)
- IoT and Wireless (544)
- Mechanical Parts and Workbench Tools (241)
- Motors & Drivers & Pumps & Actuators (583)
- Sensor Modules (639)
- Batteries, Chargers and Accessories (811)
- Battery Chargers (130)
- Battery Connector (126)
- Battery Harness (83)
- Battery Pack Accessories & Holders (144)
- Battery Protection Board (59)
- Coin Cell Battery (2)
- LiPo Battery (86)
- Lithium-Ion Battery (16)
- Non-Rechargeable Battery (3)
- Power Adapter and Cable (21)
- Wires and Cables (150)