Specification:
Maximum load: AC 250V / 10A, DC 30V / 10A
Trigger current: 3mA
Working voltage: 3V
DC +: positive power supply (VCC)
DC-: negative power supply (GND)
IN: can be a high or low level control relay
NO: normally open relay interface
COM: Common Interface Relay
NC: normally closed relay interface
Voltage version: 12V
The static current: 5mA
Working current: 190mA
Trigger current: 2-4mA
The module can be set high-level or low-level trigger by the jumper
The rated current of the interface is 16A
Diode effusion protection
Short response time
Onboard Relay:12V,10A/250V AC 10A/30V DC relay
Transmission distance : 400m (max)
Operating Voltage:12 V
Baud Rate: 9600
Operating Voltage: 24V DC
Two separate LEDs for On/Off indication of the Relay
Triggering input voltage 3.3V – 5V 4)
Back EMF protection
Equipped with high-current relay 10A@250VAC / 10A@30VDC
Freewheeling diode to protect your microcontroller
Mounting holes provided
Supply Voltage: DC 24V
Maximum Operating Current: 190mA
Trigger Mode: High and low-level trigger
Load Voltage: DC 30V / AC250
Load Current: 30A
Relay Life: more than 100,000 times
Supply Voltage: DC 12V
Quiescent Current: 5mA
Maximum Operating Current: 190mA
Trigger Mode: High and low-level trigger
Load Voltage: DC 30V / AC 250
Load Current: 30A
Relay Life: more than 100,000 times
Operating Voltage: 5VDC
Onboard Bluetooth status indicator and relay indicatorWith 2 optocoupler isolation, strong anti-interference ability
Onboard N76E003/STM8S003 and SPP-C Bluetooth 2.1 module
Effective control distance(on open area): 10m
On-board 5V, 10 A / 250 v AC 10 A / 30 v DC relay, absorb 100000 times continuously.
Diode effusion protection
Short response time
Onboard Relay:12V,10A/250V AC 10A/30V DC relay
Transmission distance : 400m (max)
Operating Voltage:12 V
Baud Rate: 9600
Supply Voltage: DC 5V
Quiescent Current: 5mA
Maximum Operating Current: 190mA
Trigger Mode: High and low-level trigger
Load Voltage: DC 30V / AC250
Load Current: 30A
Relay Life: more than 100,000 times
Has been assembled, and the electrical test passed.Led indicator for each relay.
Use it to control various appliances and other equipment with a large current.
It can be controlled directly by a Microcontroller
Input control signal voltage:
0-2.5V status low level, relay OFF
3-5V status high level, relay ON