1 x AA Battery Holder Box with Alligator Clips
SKU: AI3073 ₹25.72 (₹21.80 + GST)
QUICK OVERVIEW:
- Lightweight
- Convenient to carry this battery box holder with wires
- suitable for 1 x AA batteries With spring clip design
- Weight(g):8
70CM 4 Pin Female to Female Dupont Cable For 3D Printer –(Pack of 2)
SKU: AI2875 ₹55.46 (₹47.00 + GST)QUICK OVERVIEW:
- Type: 4Pin
- Head: Female-female
- Length: 700 mm
- Weight: 10 gm.
- Used in 3D printers, Arduino boards etc.
KP Original 101532 950mAh 3.7Vsingle cell Rechargeable LiPo Battery
SKU: AI6795 ₹274.94 (₹233.00 + GST)- Model Number: 101532
- Type: Lithium Polymer (LiPo)
- Nominal Voltage: 3.7V
- Capacity: 950mAh
- Dimensions: 32mm x 14.5mm x 10.0mm
- Weight: Approximately 40 grams
- Discharge Rate: 1C (maximum continuous)
Amass Polymax 5.5mm Gold Connectors Male-Female Pair
SKU: AI5900 ₹67.26 (₹57.00 + GST)Amass Polymax 5.5mm Gold Connectors Male-Female Pair:
- Size: 5.5 mm
- Material: Brass
- Plating: Gold
XH2.54mm 3Pin Single-headed Connect Wire 1007 26AWG 20cm (pack of 5)
SKU: AI4027 ₹161.66 (₹137.00 + GST)Quick Overview
- Name: Connector Plug With Wires
- Model: XH 2.54mm
- Fuel Source: Electric
- Pitch: 2.54mm
- Length: 200mm(20cm)
- Wire Size: 26AWG 1007
6 x AA Battery Holder Box (Back-to-Back) Without Cover
SKU: AI2891 ₹43.07 (₹36.50 + GST)
QUICK OVERVIEW:
- Holds 6 x AA batteries
- Easy install, convenient to use.
- Dimensions mm (LxWxH): 58X 46 X 28
- Weight: 15 gm
- Material: Plastic
- Internal Connection: Series
18650 Li-ion 2200mAh 7.4v 2S1P Protected Battery Pack-1c
SKU: AI5435 ₹569.94 (₹483.00 + GST)18650 Li-ion 2200mAh 7.4v 2S1P Protected Battery Pack-1c:
- Battery Type: Lithium-ion rechargeable battery pack
- Size: 18650
- Type: 18650 2S with BMS 2200mAh
- Nominal Voltage: 7.4V
- Full Charge Voltage: 8.4V
- Low Cutoff Voltage: 6V
- Maximum Continuous Discharge Current: 5A
- Capacity: 2200mAh
JST-XH 5S 20CM 22AWG Balance Charge Wire
SKU: AI4493 ₹118.00 (₹100.00 + GST)
Specification:-
Add to cart
Add to Compare
| TECHNICAL | |
| Cable Length | 20 cm |
| Plug Type | JST- XH |
| Type | Balance Charge Cable |
| Wire Type | 22AWG silicone wire |
9V Battery Holder with DC Jack
SKU: AI2877 ₹42.95 (₹36.40 + GST)QUICK OVERVIEW:
- Good Quality Material
- Color: Black
- Nickel Plated Contact Point
- Cable length: 10cm
- Weight: 10g
0.5mm Copper Wire OK Line 30AWG 230m (Yellow)
SKU: AI3972 ₹428.34 (₹363.00 + GST)Color: Yellow
Length: 230m
Outer Diameter of Single Core Wire: 0.55mm
Diameter of Copper Core: 0.25mm
Material of Core: Copper with tinned
Core Cross-sectional Area: Approximately 0.2 mm square
Complete Diameter: 0.56mm
Number of Conductors: 1
Wire Diameter: 0.5mm
Conductor Diameter: 0.25mm
Maximum Working Temperature: 180°C
KP Original 523450 1500mAh 3.7Vsingle cell Rechargeable LiPo Battery
SKU: AI6770 ₹392.94 (₹333.00 + GST)Quick Overview
- Model Number: 523450
- Type: Lithium Polymer (LiPo)
- Nominal Voltage: 3.7V
- Capacity: 1500 mAh
- Discharge Rate: 1C (1500 mA continuous current)
- Charge Voltage: 4.2V (maximum)
- Discharge Cut-off Voltage: 3.0V (minimum)
- Dimensions: 57 x 47 x 6.0 mm
XT60 Female Connector with Silicone Wire (10cm/12AWG)
SKU: AI4487 ₹92.04 (₹78.00 + GST)XT60 Female Connector with Silicone Wire:
- Connector Type: XT60 Female
- Material of Connector: High-Temp nylon
- Length: 10 cm.
- Color : Black
- Cable Thickness; 12 AWG
- High-Quality Connector
- Designed for heavy duty
- High Power Application
XT60 1 Female to 2 Male Parallel Connector Y Splitter Adapter Wire length: 10cm Wire: 14AWG silicone wire
SKU: AI4479 ₹205.32 (₹174.00 + GST)XT60 1 Female to 2 Male Parallel Connector Y Splitter Adapter:
XT60 1 Female to 2 Male Parallel Connector Y Splitter Adapter
Wire: 14AWG silicone wire
Wire length: 10cm
Use for RC helicopters,quadcopter,airplane,car and boat.
XT60 Female to DC 5.5mm/2.5mm Female Adapter
SKU: AI4474 ₹191.10 (₹182.00 + GST)XT60 Female to DC 5.5mm/2.5mm Female Adapter
“Blue 3.6W High-conductivity Whole Piece of Thermal Silica Gel CPU Notebook LED Power Heat Sink without Thermal Tape Size：0.3*200*400MM”
SKU: AI3642 ₹318.60 (₹270.00 + GST)Product Name : Thermal Silica Gel Plate
Size: 0.3X200X400MM
Material: Silicon
Original SkyRC IMAX B6AC V2 Professional Balance Charger/Discharger
SKU: AI5193 ₹5,022.08 (₹4,256.00 + GST)- PC connectivity
- Microprocessor controlled
- Delta-peak sensitivity
- Individual cell balancing
- Li-ion, LiPo, and LiFe capable
- Ni-Cd and NiMH capable
- Time limit function
- Input voltage monitoring (Protects car batteries at the field)
- Data storage (5 pack memory)
- Battery break in and cycling.
XT60 Female To T Plug Male Adapter
SKU: AI4459 ₹110.92 (₹94.00 + GST)XT60 Female To T Plug Male Adapter
- FeMale XT60 on one end
- male T-Plug on the other end
- Connector Type: XT60 Female to T Plug male Converter
- Material: High-Temp nylon
- Designed for heavy duty
- High Power Application
2 x 1.5V AAA Battery Holder Without Cover-(Pack of 2)
SKU: AI3134 ₹42.95 (₹36.40 + GST)
QUICK OVERVIEW:
- Cell Quantity: 2.
- Battery type: AAA.
- Storage temperature: 25ºC.
- Max Operate temperature: 80ºC.
Amass XT30UD Female Connector
SKU: AI1715 ₹24.31 (₹20.60 + GST)Overview
- Connector: XT30UD-F
- Gender: Female
- Colour: Yellow
- Current Handling: 30A+
- Size: 12x10x5mm
XT30 Male to Deans Female Coverter
SKU: AI4452 ₹156.94 (₹133.00 + GST)XT30 Male Connector to Dean’s T Plug Female Converter.
- No Wires / 2 Connector Adapter
- Connector: T-Plug / Deans Style Female
- Connector: XT30 Male
2P Dupont Housing Female Pin Connector 2.54mm (Pack of 5)
SKU: AI3638 ₹8.14 (₹6.90 + GST)2 Pin Header Connector
Material: Durable plastic
Pin Spacing: 2.54mm
Allowed Wire Size: 24 ~ 30 AWG
Number of Pins: 2
HXYP-1S-5020 1S 3.7V Lithium Battery Protection Board
SKU: AI4150 ₹127.44 (₹108.00 + GST)“HXYP-1S-5020 1S 3.7V Lithium Battery Protection Board,Solder Pad Affixed without Nickel Sheet
- Provide a full protection from dust, shock, scratches and bumps and other daily damage
- Completely fits and works
- Simple and easy, comfortable, easy to carry
RJ45 CAT6 Ethernet Patch LAN Cable 3M
SKU: AI3487 ₹152.22 (₹129.00 + GST)
Specification:
UTP pure copper
Solid core 568B
EIA/TIA TSB-40A ETL Verified
Moulded Strain Relief
- Category 6
- Cable Lenght: 3m
KP Original 502020 450mAh 3.7Vsingle cell Rechargeable LiPo Battery
SKU: AI6778 ₹174.64 (₹148.00 + GST)KP Original 502020 450mAh 3.7Vsingle cell Rechargeable LiPo Battery:
- Model Number: 602020
- Type: Lithium Polymer (LiPo)
- Nominal Voltage: 3.7V
- Capacity: 500mAh
- Dimensions: 22mm x19.5mm x 6.5mm
- Weight: Approximately 20 grams
- Discharge Rate: 1C (maximum continuous discharge rate)
Micro HDMI to HDMI Cable 15cm Male to Female
SKU: AI5870 ₹182.90 (₹155.00 + GST)- Cable length: 15cm
- Type: Micro HDMI to HDMI
- Color: Black
3.5mm Male to 4.0mm Female Gold Bullet banana Connector
SKU: AI4444 ₹66.08 (₹56.00 + GST)- Product Name: 3.5mm Male to 4.0mm Female Gold Bullet banana Connector
- 3.5mm Male to 4.0mm Female Gold Bullet banana Connector
- Diameter: 3.5mm
- male Connector length: 1/2 “(12mm)
- Female Connector Length: 1/2 “(12mm)
- Gold thickness: 7 microns
- Maximum wire gauge: 12 AWG
2 x AA Battery Holder Box with Alligator Clips without Cove
SKU: AI3074 ₹42.24 (₹35.80 + GST)QUICK OVERVIEW:
- Cell Quantity: 2.
- Battery type: AA
- Storage temperature: 25ºC.
- Max Operate temperature: 80ºC.
18650 Polymer Lithium ion Charger Type C to 3S 12.6V 4A Booster Module
SKU: AI6293 ₹224.20 (₹190.00 + GST)- Product Name: 18650 Polymer Lithium ion Charger Type C to 3S 12.6V 4A Booster Module
- 18650 Polymer Lithium ion Charger Type C to 3S 12.6V 4A Booster Module
- Easy to use
- Easy to install
- Good quality product
CNHL Black Series 2200mAh 3S 11.1V 30C Lipo Battery with XT60 Plug
SKU: AI5431 ₹1,689.76 (₹1,432.00 + GST)
- Capacity: 2200mAh
- Voltage: 11.1V / 3-Cell / 3S1P
- Discharge Rate: 30C Continual / 60C Burst
- Charge Rate: 5C Max
- Size(1-5mm difference): 24X34X106mm
- Approx Weight(±5g) : 180g
- Output Connector: XT60
- Balance Connector: JST / XH
- Wire (AWG): 12
4.93FT USB 2.0 A-B Male Printer Cable
SKU: AI3664 ₹95.58 (₹81.00 + GST)4.93FT USB 2.0 Printer Cable
A-B Male
1.5 m long
XT60 Female to XT30 Male ConnectorWire Length: 5CM Wire Gauge: 16AWG
SKU: AI4478 ₹192.34 (₹163.00 + GST)XT60 Female to XT30 Male Connector Wire
Specification :
Wire Length : 5 cm
Wire Gauge : 16 AWG
KP Original 402530 500mAh 3.7Vsingle cell Rechargeable LiPo Battery
SKU: AI6788 ₹168.74 (₹143.00 + GST)- Model Number: 402530
- Type: Lithium Polymer (LiPo)
- Nominal Voltage: 3.7V
- Capacity: 500mAh
- Dimensions: 32mm x 25mm x 4.5mm
- Weight: Approximately 18 grams
- Discharge Rate: 1C (maximum continuous)
KP Original 403450 1000mAh 3.7Vsingle cell Rechargeable LiPo Battery
SKU: AI6787 ₹295.00 (₹250.00 + GST)- Model Number: 403450
- Type: Lithium Polymer (LiPo)
- Nominal Voltage: 3.7V
- Capacity: 1000mAh
- Dimensions:40×34 x5 mm
- Weight: Approximately 50 grams
- Discharge Rate: 1C (maximum continuous)
SKYDROID T12 Transmitter Datalink Wire Cables For K++
SKU: AI6509 ₹406.35 (₹387.00 + GST)
The SKYDROID T12 Transmitter Datalink Wire Cables for K++ are essential components used to establish a communication link between the...
Add to cart
Add to Compare
2S AB Clip Buckle / Charger Wire protector(Pack of 5)
SKU: AI4687 ₹44.60 (₹37.80 + GST)Material:- polypropylene (PP) (Recyclable non-toxic and tasteless, it can withstand the temperature about 100 Celsius).
LT-22 Quick Connection Terminal
SKU: AI3594 ₹43.31 (₹36.70 + GST)Conductive material: tinned copper T2
Contact surface material: tin alloy coating
Clamping material: stainless steel S301
Shell material: Polycarbonate (PC); UL94 V-2
3.5mm Female to 4.0mm Male Gold Bullet banana Connector
SKU: AI4443 ₹79.06 (₹67.00 + GST)3.5mm Female to 4.0mm Male Gold Bullet banana Connector
Material : Metal
Use : Vehicles & Remote Control Toys
Upgrade Parts/Accessories : Hydraulic Transmission Box
Size : Length of female connector (3.5 mm) , Length of male connector (4.0 mm)
3 x 26650 Battery Holder with 26.3MM Core Diameter
SKU: AI3238 ₹17.94 (₹15.20 + GST)QUICK OVERVIEW:
- Model: 26650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 26.3MM
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
WeMos D1 Lithium Battery Charger Board with Mini USB
SKU: AI1117 ₹99.12 (₹84.00 + GST)
XH2-2.54mm (Port 1): Connect to lithium battery (3.3-4.2V)
Micro USB: Charging Port (5V)
Green LED: Illuminates when charging is complete
Red LED: Illuminates when charging is in progress
J1: Sets the maximum charging current: 0.5A or 1A
KP Original 351826 400mAh 3.7Vsingle cell Rechargeable LiPo Battery
SKU: AI6775 ₹181.72 (₹154.00 + GST)- Model Number: 351826
- Type: Lithium Polymer (LiPo) Battery
- Total Capacity: 400mAh
- Nominal Voltage: 3.7V
- Configuration: Single Cell
- Dimensions: 29mm x 19.5 x 4.0mm
- Weight: Approximately 30g
6 x 1.5V AA Battery Holder with DC 2.1 Power Jack
SKU: AI3131 ₹61.36 (₹52.00 + GST)- Cell Quantity: 6.
- Battery type: AA.
- Storage temperature: 25 ºC.
- Max Operate temperature: 80 ºC.
- DC 2.1 Power Jack.
XH2.54mm 10P Bend Pin Header Connector – (Pack of 5)
SKU: AI3087 ₹12.39 (₹10.50 + GST)
QUICK OVERVIEW
- Solid and durable.
- Safe and easy to install.
- RoHS compliant.
- Color: White
- Gender: Male
Black 1M Double End Test lead Wire 4mm Banana Plug Alligator Clip Crocodile 15A
SKU: AI6302 ₹133.34 (₹113.00 + GST)- Color: Black
- Length: 1 meter
- Current Capacity: 15A
- Easy installation
- 4mm Banana Plug Suitability
XT60 Plug to XT60 EC3 XT30 TRX JST FUTABA TAMIYA T Plug Charger Adapter Cable
SKU: AI4546 ₹460.20 (₹390.00 + GST)
Specification:
8in1 cable
Specification:
Wire Material: Soft Silicone
Wire length: 20cm
Input Connector: XT60 plug or 4mm Bullet connector
Output connector:
T-Dean (male)
XT60 (male)
EC3 (male)
XT30 (male)
TRX (male)
JST (female)
Futaba (female)
Tamiya
Package Included:
1 x XT60 Plug to XT60 EC3 XT30 TRX JST FUTABA TAMIYA T Plug Charger Cable
Multifunction Insulated Aluminum Alloy Soldering Station Red
SKU: AI4423 ₹815.38 (₹691.00 + GST)Multifunction Insulated Aluminum Alloy Soldering Station
color :Red
size– 60x110x15mm
Material : Aluminium Alloy
WAGO 221-483 Connection Terminal
SKU: AI3597 ₹107.38 (₹91.00 + GST)
QUICK OVERVIEW:
Add to cart
Add to Compare
|
Termination |
Push In
|
|
|
Wire Gauge |
12-24 AWG
|
|
|
Insulation |
Fully Insulated
|
|
|
Features |
Releasable
|
|
|
Color |
Transparent - Gray
|
Motherboard, PCB, Breadboard Jumper Cable 150mm 24AWG Red –(Pack of 50)
SKU: AI1406 ₹67.26 (₹57.00 + GST)Motherboard, PCB, Breadboard Jumper Cable 150mm 24AWG Red –(Pack of 50):
- Color : Red
- Current Capacity : 2 -3 A
- Diameter : 0.51 mm
- Length : Approx. 15cm 24AWG
- Used for : Bread board , PCB
- High Current Carring capacity
KP Original 75130+ 40mAh 3.8Vsingle cell Rechargeable LiPo Battery
SKU: AI6764 ₹108.56 (₹92.00 + GST)- Model Number: 380721
- Type: Lithium Polymer (LiPo) Battery
- Total Capacity: 30mAh
- Nominal Voltage: 3.8V
- Configuration: Single Cell
- Dimensions: 20mm x 7.0mm x 4.00mm
- Weight: Approximately 5g
T Type 9V Battery Clips Connector Buckle with Alligator Clips
SKU: AI3626 ₹53.10 (₹45.00 + GST)Excellent material
It is an environmental 9V battery buckle
The Cable Length: 12cm Approx.
Convenient for connecting a battery to your application.
Save power and protect the environment
Good electrical conductivity and comfortable sense of touch
4S 15A 18650 Lithium Battery Protection Board
SKU: AI3183 ₹168.74 (₹143.00 + GST)Quick Overview
- Overcharging and Over Discharging Protection
- Short circuit protection: Yes
- Applicable assembly: Nominal 3.7V Batteries / 4 strings.
Fireproof 3 X 6 18650 Battery Holder with 18.4MM Bore Diameter
SKU: AI1404 ₹34.34 (₹29.10 + GST)Model: 18650 radiating battery spacer.
Material: ABS/PC (Remarkable Flame Retardant Plastic).
Bore Diameter: 18.4mm
Combined them into many different sizes and shapes of the battery pack.
Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
18650 Polymer Lithium ion Charger Type C to 3S 12.6V 2A Booster Module
SKU: AI6295 ₹213.58 (₹181.00 + GST)18650 Polymer Lithium ion Charger Type C to 3S 12.6V 2A Booster Module:
- 18650 Polymer Lithium ion Charger Type C to 3S 12.6V 2A Booster Module
- Easy to use
- Easy to install
- Good quality product
XT60 Female to Crocodile Clip Conector Plug wire:14AWG 30cm
SKU: AI4489 ₹151.04 (₹128.00 + GST)Quick Overview
- Product Name:XT60 Female to Crocodile Clip Connector Plug wire:14AWG 30cm
- Length : 30 cm
- Wire Gauge : 14AWG
- Color: Red & Black
- Light Weight
- High quality
1S 3.7V 7.5A 5MOS BMS Li- ion 18650 Battery Protection Board
SKU: AI3349 ₹61.36 (₹52.00 + GST)QUICK OVERVIEW:
- Over charge detection voltage : 4.25 + 0.05V
- Over charge release voltage : 4.23 + 0.05V
- discharge detection voltage : 2.45 + 0.1V
- Ceiling continuous current : 12A
- Overcurrent detection current : 7.5A
- Input Charging voltage : 3.7V
XT60 Male to XT30 Female Connector Wire Length: 5CM Wire Gauge: 16AWG
SKU: AI6724 ₹193.52 (₹164.00 + GST)XT60 Male to XT30 Female Connector Wire Length: 5CM Wire Gauge: 16AWG
- Connection type: XT60 Male to XT30 Female
- Length: 5 cm
5 X 5 18650 Battery Holder with 18.5MM Bore Diameter
SKU: AI3118 ₹38.47 (₹32.60 + GST)
QUICK OVERVIEW:
- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
XH2.54mm 8P Bend Pin Header Connector – (Pack of 5)
SKU: AI3086 ₹10.97 (₹9.30 + GST)
QUICK OVERVIEW:
- Solid and durable.
- Safe and easy to install.
- RoHS compliant.
IMAX B6AC Charger/Discharger 1-6 Cells
SKU: AI5296 ₹2,769.46 (₹2,347.00 + GST)- AC 100~240v or 12V DC input
- The cables come with a fitted fuse.
- Microprocessor controlled
- Li-ion, LiPo, and LiFe capable
- Input voltage monitoring. (Protects car batteries at the field)
- Battery break-in and cycling feature
- Data storage (Store up to 5 packs in memory)
- Internal resistance checker to see pack health
- Delta-peak sensitivity
- Individual cell balancing
CNHL Black Series V2.0 1500mAh 11.1V 3S 130C Lipo Battery with XT60 Plug
SKU: AI7887 ₹2,050.84 (₹1,738.00 + GST)Quick Overview:
- Product Name: CNHL Black Series V2.0 1500mAh 11.1V 3S 130C Lipo Battery with XT60 Plug
- Capacity: 1500mAh
- Voltage: 11.1V / 3-Cell / 3S1P
- Discharge Rate: 130C Continual / 260C Burst
- Charge Rate: 5C Max
SafeConnect Nylon TConnector Harness for 2 Packs in Parallel Battery Adapter Cable (2M-1F)
SKU: AI5329 ₹108.56 (₹92.00 + GST)Use this adapter to power a stand-alone BEC, an electronic accessory such as a cooling fan, LED lights etc.
XT60Male to DC power cable Product size: 121cm
SKU: AI4473 ₹345.74 (₹293.00 + GST)
XT60Male to DC power cable Product size: 121cm:
Add to cart
Add to Compare
- XT60 Male to DC power cable
- This handy cable is useful to those wanting to power FPV equipment in the field. It has an XT60 battery connection and two output connections:
- Input connection: XT 60
- Output Plug : DC Power
- Size: 121 cm
XT90 Male to EC5 female adapter
SKU: AI4462 ₹199.42 (₹169.00 + GST)XT90 Male to EC5 female adapter
This small adapter cable allows you to convert an EC5 battery to an XT90 connection as easily as plugging in the connector – no messy soldering required!
It’s the perfect accessory for chargers equipped with the XT90 connector.
AA x 6 Battery Holder Box with Cover/ON-OFF
SKU: AI3242 ₹84.96 (₹72.00 + GST)
QUICK OVERVIEW:
- Product: AA x 6 Battery Holder Box with Cover/ON-OFF
- Easy install
- convenient to use
- Enclosed Holders come with screw to secure
KP Original 581943 800mAh 3.7Vsingle cell Rechargeable LiPo Battery
SKU: AI6791 ₹253.70 (₹215.00 + GST)- Model Number: 581943
- Type: Lithium Polymer (LiPo)
- Nominal Voltage: 3.7V
- Capacity: 800mAh
- Dimensions:45mm x 20mm x6.0mm
- Weight: Approximately 40 grams
- Discharge Rate: 1C (maximum continuous)
CNHL Black Series 2200mAh 7.4V 2S 30C Lipo Battery with XT60
SKU: AI5449 ₹1,315.70 (₹1,115.00 + GST)
The CNHL Black Series 2200mAh 7.4V 2S 30C LiPo battery with XT60 plug is a popular choice among RC enthusiasts,...
Add to cart
Add to Compare
20cm 16AWGXT60 Plug to XT60 XT30 DC5.5 T Plug Charger Adapter Cable
SKU: AI4543 ₹403.20 (₹384.00 + GST)- Input Connector: XT60 Plug
- Output Connector: XT60/T/XT30/JST/DC5.5 2.1 Goggles Plug
- Wire Length: 20cm
- Wire Gauge: 16AWG
- Rated Temperature: -60°C~+200°C
XT90 Male To T Plug Female Adapter
SKU: AI4461 ₹146.32 (₹124.00 + GST)SafeConnect XT90 male to T plug female Connector is a handy adapter to convert an XT90 equipped battery to an XT60 plug. Its ultra-small size, lightweight, suitable for the installation of all types of model projects. Useful for use with an XT90 equipped ESC or Charge lead.
KP Original 523450 1500mAh 3.7V single cell Rechargeable LiPo Battery (Blue)
SKU: AI6767 ₹392.94 (₹333.00 + GST)Quick Overview: KP Original 523450 1500mAh 3.7 V single cell Rechargeable LiPo Battery(Blue)
- Model Number: 523450
- Type: Lithium Polymer (LiPo)
- Nominal Voltage: 3.7V
- Capacity: 1500 mAh
- Discharge Rate: 1C (1500 mA continuous current)
- Charge Voltage: 4.2V (maximum)
- Dimensions: 49 x 34 x 4.0 mm
KP Original 411525 450mAh 3.7V single cell Rechargeable LiPo Battery
SKU: AI6763 ₹236.00 (₹200.00 + GST)Quick Overview:
- Model Number: 411525
- Battery Type: Lithium Polymer(LiPo)
- Nominal Voltage: 3.7V
- Capacity: 450mAh
- Dimensions: 25mm x 15mm x 4mm
- Weight: Approx. 30g
- Discharge Rate: 1C (up to 480mA continuous)
XT60 Male XT60 Female JST Female In-line Power Adapter
SKU: AI4482 ₹177.00 (₹150.00 + GST)- Product Name: XT60 Male XT60 Female JST Female In-line Power Adapter
- Weight: 26g
- Battery Connection: XT60 male ~ female to JST female
- Wire Gauge: 22AWG
DC24V 16MM 12LED Alloy Air Humidifier Mist Maker Nebulizer 46MM*38MM EU Plug
SKU: AI4149 ₹431.88 (₹366.00 + GST)Operating Voltage (VDC):24
Connector:5.5mm Power Jack
Cable Length (Meter):1
Body Diameter (mm):47
Height (mm):25
Weight (gm):134
HOT DD30CRTA Car, Lead Acid Battery, Charger 12V Charging, Device 3A Current 1-, 10000AH UPS Solar, Power Module, （With Terminal）
SKU: AI2490 ₹588.82 (₹499.00 + GST)QUICK OVERVIEW:
- Power supply voltage: 15-28VDC(Recommended 16-25VDC)
- Over Charge Voltage is 14.8V
- Float Charge Voltage is 13.55V
- Maximum charge current: 3A
- Quiescent current: about 1.8mA
- High PWM Switching Frequency:300KHz
- Operating Ambient Temperature: -40℃ to +85℃
- Size: 66 x 20x 12mm
- Weight: 9g
KP Original 802040 600mAh 3.7Vsingle cell Rechargeable LiPo Battery
SKU: AI6803 ₹295.00 (₹250.00 + GST)KP Original 802040 600mAh 3.7Vsingle cell Rechargeable LiPo Battery:
- Model Number: 802040
- Type: Lithium Polymer (LiPo)
- Nominal Voltage: 3.7V
- Capacity: 600mAh
- Dimensions: 42mm x 21mmx 7mm
- Weight: Approximately 25 grams
- Discharge Rate: 1C (maximum continuous)
KP Original 802540 1200mAh 3.7Vsingle cell Rechargeable LiPo Battery
SKU: AI6766 ₹333.94 (₹283.00 + GST)Quick Overview
- Product Name: KP Original 802540 1200mAh 3.7Vsingle cell Rechargeable LiPo Battery
- Model Number: 802540
- Type: Lithium Polymer (LiPo)
- Nominal Voltage: 3.7V
- Capacity: 1200 Mah
- Discharge Rate: 1C (1200 mA continuous current)
- Dimensions: 41mm x 25 mm x 8.0 mm
20cm 20AWG 4.0mm Banana Plug to XT60 XT30 DC5.5 T Plug Charger Adapter Cable
SKU: AI4544 ₹396.48 (₹336.00 + GST)20cm 20AWG 4.0mm Banana Plug to XT60 XT30 DC5.5 T Plug Charger Adapter Cable
- Input Connector: XT60 Plug
- Output Connector: XT60/T/XT30/JST/DC5.5 2.1 Goggles Plug
- Wire Length: 20cm
- Wire Gauge: 20AWG
- Rated Temperature: -60°C~+200°C
6 x AA Battery Holder Box, with 4 wires DC, Without Cover
SKU: AI4213 ₹63.72 (₹54.00 + GST)- Holds 6 x AA batteries
- Easy install, convenient to use.
- Material: Plastic
- Internal Connection: Series
6V Two Wire Digital Display Electric Quantity Meter
SKU: AI3612 ₹90.86 (₹77.00 + GST)6V Two Wire Digital Display Electric Quantity Meter
Material: Plastic and Metal
Shell Color: Black
Digital Color: Outline Red, Display Block Blue
3S 15A 18650 Lithium Battery Protection Board
SKU: AI3182 ₹193.52 (₹164.00 + GST)
QUICK OVERVIEW:
- Overcharging and Over Discharging Protection
- Short circuit protection: Yes
- Applicable assembly: Nominal 3.7V Batteries / 3 strings.
KP Original 402535 500mAh 3.7Vsingle cell Rechargeable LiPo Battery
SKU: AI6804 ₹174.64 (₹148.00 + GST)- Model Number: 402535
- Type: Lithium Polymer (LiPo)
- Nominal Voltage: 3.7V
- Capacity: 500mAh
- Dimensions: 35 x 25 x 9 mm
- Weight: Approximately 15 grams
- Discharge Rate: 1C (maximum continuous)
XT60 1 Male 2 FemaleParallel Battery Connector
SKU: AI4451 ₹189.98 (₹161.00 + GST)- Designed for heavy duty
- High Power Application
- Material: High-Temp Nylon
- Connector Type: XT60
- Connectors: One XT60 Male and Two XT60 Female
- Length: 42 mm
- Weight: 14 gm.
Free Shipping
On orders above ₹999
COD Available
Min. order ₹250 for COD
GST Invoice
Available on all orders
1,50,000+ Orders
Delivered across India
Expert Support
Toll Free: 1800 209 0998
Product categories
- Show All Categories
- 3D Printers and Parts (379)
- Batteries, Chargers and Accessories (811)
- Clearance Sale (0)
- Development Boards (438)
- DIY Learning and Robot Kits (117)
- Drone Parts (1364)
- EBike parts (140)
- Electronic Components (783)
- Electronic Modules and Displays (1201)
- FPV Freestyle Mid/High KV Drone Motors (0)
- IoT and Wireless (544)
- Mechanical Parts and Workbench Tools (241)
- Motors & Drivers & Pumps & Actuators (583)
- Sensor Modules (639)
- Batteries, Chargers and Accessories (811)
- Battery Chargers (130)
- Battery Connector (126)
- Battery Harness (83)
- Battery Pack Accessories & Holders (144)
- Battery Protection Board (59)
- Coin Cell Battery (2)
- LiPo Battery (86)
- Lithium-Ion Battery (16)
- Non-Rechargeable Battery (3)
- Power Adapter and Cable (21)
- Wires and Cables (150)