-
perating Voltage: 3.3V / 5V
-
Resolution: 170 × 320 Pixels
-
Communication Interface: 4-wire SPI
-
Display Size: 22.70 × 42.72 mm
perating Voltage: 3.3V / 5V
Resolution: 170 × 320 Pixels
Communication Interface: 4-wire SPI
Display Size: 22.70 × 42.72 mm
Supports USB to 8CH RS485 for multiple device connections.
Type-C power supply with 5V–36V auxiliary input.
Onboard power and digital isolation for reliability.
Surge protection with TVS and self-recovery fuse.
Configurable terminal resistors for flexibility.
Processor: Xtensa LX7 dual-core, 240MHz
Connectivity: Wi-Fi, Bluetooth 5
Memory: 512KB SRAM, 16MB Flash
Display: 4″ LCD, 480×480
Interfaces: Touch, CAN, RS485, USB, TF slot
Sensor: OV9281
CMOS size: 1/4 inch
Camera type: mono
Pixels: 1MP (1280 × 800)
Optical Size: 1/4 inch
Focusing Range: 65mm ~ infinite
IR Sensitive: Visible light only, built-in 650nm IR cut filter
Power: NFC-powered
Resolution: 200×200
Dot pitch: 0.138 × 0.138
Refresh time: 8s (Transmit time is not included)
Display color: black, white, red
Viewing angle: >170°
Dual-core processors: Arm Cortex-M33 and RISC-V.
High-speed: Up to 150 MHz clock.
Memory: 520KB SRAM, 4MB Flash.
Connectivity: USB 1.1, Type-C.
Peripherals: SPI, I2C, UART, ADC, PWM.
Low-power modes: Sleep and dormant.
Waveshare Luckfox Pico Ultra RV1106 Linux Micro Development Board
Waveshare ESP32-S3 1.85inch Round Display Development Board
Processor: 32‑bit LX7 dual-core (up to 240 MHz)
Display: 1.85″ LCD, 360×360 resolution, 262 K colors
Connectivity: Wi‑Fi (2.4 GHz) & Bluetooth 5 (BLE)
Memory: 16 MB Flash, 8 MB PSRAM, 512 KB SRAM
Sensors: 6‑axis IMU, RTC sensor
Power: Rechargeable battery, low‑power modes
16-Pin PCIe for easy Pi 5 integration
40-Pin GPIO for HATs
PoE for power and network in one cable
5V & 12V Outputs for up to 4.5A (25W max)
Low-power e-paper display for price tags and shelf labels.
No electricity needed for content display, ideal for saving power.
Wide viewing angles for clear visibility in various lighting conditions.
Comes with online development resources for easy integration.
Perfect for applications like asset tags and conference name tags.
Quick Overview:
Memory: 520KB SRAM, 16MB Flash
Connectivity: USB 1.1, Type-C, 26 GPIO pins
Power: 2A DC-DC buck-boost chip, battery recharge
Peripherals: 2 SPI, 2 I2C, 2 UART, 4 ADC, 16 PWM
Low Power: Sleep and dormant modes
Processor: RP2040
SRAM: 264KB
Flash Memory: 16MB
Compact Form Factor
GPIO Pins
Display Paper-like display without electricity consumption
Driver board Optional driver board enhances flexibility
Standard Raspberry Pi HAT+ standard for plug-and-play development
Use Perfect for shelf labels, industrial tags, e-notices
Integration Easy integration into embedded systems via SPI
3.7-inch E-Ink Display: 416×240 resolution
Supports Four Display Colors: Red, Yellow, Black, White
Ultra-low Power: No backlight needed
SPI Interface: For Raspberry Pi, Arduino, and more
Available: With or without driver board
Paper-like, Wide-viewing Display: Ideal for tags & labels
Model: Waveshare Transparent and Black Acrylic Case for Raspberry Pi 5, Supports installing Official Active Cooler.
Model: IMX477-160
Operating voltage: 3.3V
Sony IMX477 sensor
Pixels: 12.3MP
MIPI-CSI Camera
High Quality Camera
Quick Overview:
SSD1315 driver chip
Compatible with Raspberry Pi, Pico, Arduino, STM32
Operates at 5V/3.3V with I2C communication
Resolution of 64 × 32 pixels
Compact size: 14.4 × 11.5 mm display
Supports black and white display colors
Operating voltage: 3.3V/5V
Communication interface: I2C/SPI
Barometric pressure operation range: 300~1250hPa
Possible sampling rate:200Hz
Operating temperature: -40~85℃
Dimension: 32mm × 20mm
Powerful 40mm cooling fan
Supports PWM speed control
4PIN reverse-proof connector
Voltage: 5V
Ideal for Jetson Nano
Compact & efficient design
Quick Overview:
Quick Overview:
BRAND: Waveshare
CONTROLLER MODULE: ESP32
POWER SUPPLY PORT: XT60, DC5525
COMMUNICATION INTERFACE: Type‑C × 2, UART
WIRELESS COMMUNICATION: 2.4G WiFi
MOUNTING HOLE DIAMETER: 3 mm
HUB MOTOR PORT: DDSM115, DDSM210
Quick Overview:
Model: Waveshare 3.5 inch Capacitive display
Resolution: 640 × 480
5-point capacitive touch
Support HDMI audio output
Optional USB Type-C or I2C touch
Tempered glass panel, hardness up to 6H
Orin-ready UPS
Stable, monitored power
Battery protection
Long runtime (3x 21700)
Dev support
Quick Overview
Product: Camera, Infrared Sensors
8 Megapixels
Sensor: IMX219
Resolution: 3280 × 2464
CMOS size: 1/4 inch
Quick Overview: Waveshare 7inch QLED Touch Integrated Display, 1024 × 600, Thin and Light Design
Input Voltage: 4.75 V
Input Current: 500 Amps
Output Voltage: 3.1 V
Resolution: 1024 (RGB) × 600
4-channel PCIe Expansion: From one Pi 5 port
Supports: High-speed PCIe Gen2 data transfer
Modular Stacking: With multiple HATs for advanced setups
Stable Power Monitoring: And onboard EEPROM
Perfect Fit: For Raspberry Pi 5 with plug-and-play support
Resolution 384 × 184 pixel
Display Color Red/Yellow/Black/White
Readability Paper-like
Interface SPI
Power Power efficient, <30mW refresh
High-resolution AMOLED display with capacitive touch
Dual-core MCU supporting both ARM & RISC-V architectures
Integrated motion sensing (gyro + accelerometer)
Onboard audio and RTC for full-featured development
Compact size with battery compatibility for mobile use
Overview
Quick Overview:
Quick Overview:
ESP32-S3 Dual-Core
2.4GHz WIFI & Bluetooth 5
8MB PSRAM, 16MB Flash
Type-C Connector
Field of View: 98° wide-angle lens
Low Light Performance: High SNR for clarity in dim conditions
Distortion: <1% for accurate images
Applications: Suitable for AI tasks (facial, license plate recognition)
Compact Size: Easy integration into projects
Aperture: F2.0 for enhanced light capture
Quick Overview:
The Waveshare RP2350-PiZero Development Board is a versatile and high-performance microcontroller platform designed around the Raspberry Pi RP2350 dual-core, dual-architecture chip
High-performance RP2350 dual-core MCU
Dual ARM Cortex-M33 & RISC-V cores
520KB SRAM, 16MB onboard flash
DVI, USB-C, TF card slot interfaces
Supports C/C++, MicroPython, Arduino IDE
Working Voltage: 9 ~ 24 V (typ. 24V)
Mechanism Limit Angle: No limit
Rotation Angle: 360° (angle control in servo mode)/continuous rotation in motor mode
Baudrate: 38400 bps ~ 1 Mbps (1 Mbps by default)
Gear: high precision steel gear (reduction ratio 1:353)
Quick Overview:
Product: Cat-1/GNSS HAT
Power supply: 5V
Logic level: 3.3V
Data transmission: ≤5Mbps (UL) / ≤10Mbps (DL)
GNSS: GPS, GLONASS, Galileo, BeiDou
Quick Overview:
Supports NVMe M-Key SSDs
Connects to Raspberry Pi 5 via 16-pin PCIe
Compatible with 2280/2260/2242/2230 M.2 sizes
Handles up to 4 SSDs, supports SSD boot
Faster than TF card storage
Processor: Xtensa 32-bit LX7, up to 240MHz
Connectivity: Wi-Fi, Bluetooth 5 (LE)
Memory: 512KB SRAM, 384KB ROM, 16MB Flash, 8MB PSRAM
Display: 2.8″ capacitive touch, 480×480
Interfaces: UART, I2C, USB
Quick Overview:
Based on: Raspberry Pi RP2350A microcontroller
Onboard: XL2515 CAN controller with transceiver
Supports: CAN bus communication via SPI
Form Factor: Compact, easy-to-integrate
Ideal For: Automotive and industrial CAN applications
Multiple I/O Ports: For peripheral expansion
Display: 262K colors, 320×480 resolution
Touch: Fast, sensitive, long-lasting
Chipset: ST7796S, XPT2046 (SPI)
Connection: Pigo pin, GH1.25 11PIN
Durability: Immersion Gold process
160×160 Resolution
65K Colors
SPI Interface
Compact & Round Design
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998