-
Power supply: 5V (Pi connector) OR 6V~12V (VIN terminal)
-
Servo voltage: 5V
-
Logic voltage: 3.3V
-
Driver: PCA9685
Waveshare LCD1602 I2C Display Module White color with blue background LCD:
AlphaBot2 robot building kit for Raspberry Pi 3B/3B+/4B Note: Raspberry Pi is NOT included.
SAFETY CAUTIONS Li-ion and Li-po batteries are quite unstable.
They may cause fire, personal injury, or property damage, if they’re not properly recharged or used.
Do not reversely connect the polarities when recharging or discharging the battery. Do not use inferior
Overview
Quick Overview:
SX1262 LoRa module
74HC125V: voltage level translator
CP2102: USB TO UART converter
Working bands: 850.125 ~ 930.125MHz
Receive Sensitivity: [email protected] (On-air)
Interface: UART
Range: 5KM (Sunny day; open area; Antenna: AUX 5dBi, Height 2.5m; Air Speed: 2.4kbps)
NVMe Protocol Support
High-speed Reading/Writing
Raspberry Pi Compute Module 4 Compatibility
Product: Waveshare 8inch Capacitive Touch Display, Optical Bonding Toughened Glass Panel, 1280×800, IPS, HDMI Interface
Model: 8DP-CAPLCD
Input Voltage: 4.75-5.25 V
Input Current: 750-800 TBD
Viewing Angle: 178
Quick Overview :
This is a Raspberry Pi GNSS HAT that supports Multi-GNSS systems: GPS, BDS, and QZSS, with advantages such as fast positioning, high accuracy, low power consumption, and so on.
POWER SUPPLY VOLTAGE: 5V / 3.3V
OPERATING CURRENT: 13 mA
PROTOCOLS: NMEA 0183, PMTK
GNSS ANTENNA CONNECTOR
CAT24C32: EEPROM
RT9193-33: power manager
BATTERY HOLDER: supports ML1220 rechargeable battery, for preserving ephemeris information and hot starts
Quick Overview:
POWER INPUT: 37 V ~ 57 V DC in
POWER OUTPUT: 12 V 2.1 A DC out
NETWORK STANDARD: supports IEEE 802.3af/at PoE
DIMENSIONS: 21 × 92 mm
Quick Overview:
Model: Waveshare 3.5 inch Capacitive display
Resolution: 640 × 480
5-point capacitive touch
Support HDMI audio output
Optional USB Type-C or I2C touch
Tempered glass panel, hardness up to 6H
Display: 2.8 inch IPS
Resolution: 480×640
Viewing Angle: 160°
Touch Port: I2C
Refresh rate: 60Hz
4.3inch IPS Display, 800 × 480 hardware resolution.
5-point capacitive touch, toughened glass panel, hardness up to 6H (this function is only for the touch version).
Support Pi4B/3B+/3A+/3B/2B/B+/A+, some CM3/3+/4 expansion board need a DSI-Cable-15cm.
Directly drive the LCD via the DSI port of the Raspberry Pi, with a refreshing rate of up to 60Hz.
When working with Raspberry Pi, it supports Raspberry Pi OS/Ubuntu/Kali and Retropie, and is driver-free.
Support software backlight adjustment, saving more power.
Quick Overview:
Compact SMD-friendly castellated design
Enhanced security: Secure boot, tamper protection
Supports 3.3V or 5V logic (default 3.3V)
Ideal for IoT, robotics, and wearable tech
Comes with comprehensive SDK and tutorials
Quick Overview
800×480 hardware resolution
Resistive touch control
Using Raspberry Pi, it supports Raspbian / Ubuntu / Kali / Retropie and WIN10 IoT, no need to install any drivers.
Quick Overview: Waveshare 7inch QLED Touch Integrated Display, 1024 × 600, Thin and Light Design
Input Voltage: 4.75 V
Input Current: 500 Amps
Output Voltage: 3.1 V
Resolution: 1024 (RGB) × 600
3.7-inch E-Ink Display: 416×240 resolution
Supports Four Display Colors: Red, Yellow, Black, White
Ultra-low Power: No backlight needed
SPI Interface: For Raspberry Pi, Arduino, and more
Available: With or without driver board
Paper-like, Wide-viewing Display: Ideal for tags & labels
4-channel PCIe Expansion: From one Pi 5 port
Supports: High-speed PCIe Gen2 data transfer
Modular Stacking: With multiple HATs for advanced setups
Stable Power Monitoring: And onboard EEPROM
Perfect Fit: For Raspberry Pi 5 with plug-and-play support
ST3025 40kg.cm Metal Serial Bus Servo, High Precision And Large Torque, With Programmable 360 Degrees Magnetic Encoder and Brushless Motor This product is a dual-axis serial bus servo with high torque. It incorporates a 360° high-precision magnetic encoder, allowing for angle control within a 360…
Quick Overview:
Quick Overview:
Quick Overview:
Quick Overview:
Quick Overview:
Quick Overview:
Quick Overview:
Quick Overview:
Power supply: 5V
Operating current: 61mA@5V
Wavelength range: 8~14μm
Operating temperature: -20~85℃
Target temperature: -20~400℃
Operating Voltage: 3.3 ~ 5V
• LCD Controller: AiP31068
• Communications Interface: I2C
• RGB Driver: PCA9633
• Display Panel: character
• LCD Display Size: 64.5 × 16.0mm
• Display Size: 64.5 × 16.0mm
Power supply: 5V (Pi connector) OR 6V~12V (VIN terminal)
Servo voltage: 5V
Logic voltage: 3.3V
Driver: PCA9685
Quick Overview:
Size: 5″
Resolution: 800×480
Display Port: HDMI
Resistive touch control.
Support backlight control, more power saving.
Waveshare Multi-functional All-in-one Mini-Computer Kit Designed for Raspberry Pi 5
Compatibility: Designed for Raspberry Pi 5 module
Case Material: Aluminum alloy
Type: PCIe to M.2 interface (adapter board not included)
Internal PCIe Slot: Options available for integrating a PCIe adapter board
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998