Buy gas sensors and dust sensors online in India at Zbotic. Our comprehensive gas sensor range includes MQ-series sensors (MQ-2, MQ-3, MQ-5, MQ-7, MQ-135) for detecting combustible gases, alcohol, carbon monoxide, LPG, methane, and air quality. We also stock PM2.5 particulate matter sensors, CO2 sensors (MH-Z19), formaldehyde sensors, and industrial-grade gas detection modules. Essential for air quality monitoring, safety systems, and environmental IoT applications.
Sensitivity to Ammonia, Sulphide and Benzene steam
Sensitive for benzene, alcohol, smoke
Fast response and recovery
Adjustable sensitivity
Signal output indicator
Output voltage boosts along with the concentration of the measured gases increases.
High sensitivity to Ammonia, Sulfide and Benzene
Stable and Long Life
Detection Range: 10 – 300 ppm NH3, 10 – 1000 ppm Benzene, 10 – 300 ppm Alcohol
Heater Voltage: 5.0V
Dimensions: 18mm Diameter, 17mm High excluding pins, Pins – 6mm High
Long life and low cost
Good sensitivity to CO/Combustible Gas
High sensitivity to Methane, Propane, and CO
Long life and low cost
Simple drive circuit
Input voltage: DC 5±0.2V
Current Consumption: 150mA
QUICK OVERVIEW:
MH-Z19C NDIR Infrared Carbon Dioxide Sensor Module:
| arget: | H2S |
| Model: | MQ136 |
| Detection range: | 1-200ppm |
| Detection principle: | Semiconductor |
| Characteristics: | Good sensitivity to H2S |
| Size: | φ19×24.2 |
| Working conditions: | Loop Voltage:5±0.1V Heater Voltage:5±0.1V Heater consumption:≤950mW |
QUICK OVERVIEW:
QUICK OVERBIEW:
| Supply voltage (V) | -0.3 ~+7 |
| Operating supply voltage (V) | 5 |
| Operating current (Max) | 90mA |
| Output mode | PWM pulse width modulation |
| Sensitivity | 15,000 / 283ml |
| Operating Temperature (C) | -10 ~ +65 |
| Storage temperature (C) | -20 ~ +80 |
| Settling time | Approximately 1 minute after the heater is switched on |
Fast response characteristics
Mounting holes to facilitate fixed installation
The probe can plug design for easy testing.
Signal light indicates the output
Dual signal output (analog output, and TTL-level output)
TTL output valid signal is low; (low output signal light, can be accessed by the microcontroller IO port)
MQ-131 Ozone Gas Detector Sensor Module WITH BLACK CAP:
• Detects: TVOC, CO₂, CH₂O
• Communication: UART
• Features: Sensitive, low power, compact
• Resources: Manual & examples for Raspberry Pi, Arduino, ESP32
Power supply voltage: DC5 ± 2V
Sensitivity: 0.5V / (0.1mg / m3)
The minimum detection level of particles: 0.8 m
Clean air voltage: 0.9V typ.
Low consumption current (Icc: MAX. 20 mA)
The presence of dust can be detected by the photometry of only one pulse
Enable to distinguish smoke from house dust
Using high-quality dual-panel design, with power indicator and TTL signal output instructions.
The switching signal having a DO (TTL) output and analog output AO.
TTL output valid signal is low.
The higher the voltage, the concentration of the analog output voltage is higher.
A hydrogen gas detection with good sensitivity.
Has a long life and reliable stability
LCD Displayer (optional): 4 digits LCD displayer.
Audibility: 85dB ( at 1m distance ), Frequency 3 – 0.5KHZ.
Standby Current: <50μA.
Alarm Current: <50mA.
Standby Mode: Green Led flashes once every 30 seconds.
QUICK OVERVIEW:
| Model number | MP135 |
|---|---|
| Item Weight | 1 g |
| Item Weight | 1 Grams |
| Item model number | MP135 |
QUICK O VERVIEW:
| Model | MQ137 | ||
| Sensor Type | Semiconductor | ||
| Standard Encapsulation | Bakelite, Metal cap | ||
| Target Gas | Ammonia Gas(NH3) | ||
| Detection range | 5~500ppm NH3 | ||
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998