This is the 850V variant of the TB6600 Stepper Motor Driver Controller 8~50V 4.5A in Stepper Motor Drivers. Available at ₹599.44 (₹508.00 + GST) with free shipping across India.
Looking for Tb6600 Motor 50v? TB6600 Stepper Motor Driver Controller 8~50V 4.5A is available at Zbotic with fast shipping across India.
Product Description
This text describes the TB6600 stepper motor driver controller 4.5A 8~50V TTL 16 Micro-Step CNC Single-Axis, which is based on the TB6600HG chip and replaces the previous model BL-TB6560-V2.0.
This driver controller can be used to build both amateur and professional CNC systems that require high power engines. It has several advantages over the older generation of the TB6560AHG, such as higher output power (200W vs 100W), higher operating voltage (50V vs 35V), and higher operating current (4.5A vs 3A).
The driver controller features intelligent current control and PWM modulation, which allow it to adapt to any stepper motor with different voltage and current ratings. The chip will automatically limit the maximum current to a fixed level.
The maximum operating frequency has been increased.
Features :
- The output current is infinitely adjustable to meet your various application requirements.
- Automatic half current function. And a semi-automatic flow switch, easy to use.
- The use of high-speed optical coupling 6N137 ensures high-speed without losing a step.
- Print on the back panel subdivides setup instructions.
- Used to increase the heat sink, good heat dissipation.
- Output short-circuit protection, the use of the mind.
- Using common anode input mode, there are two input terminals, wiring more convenient.
Specification-
| Input Supply Voltage (VDC) | 8 ~ 50 |
|---|---|
| Operating Voltage (VDC) | 36 |
| Max. Output Current (Amp) | 0.3 to 4.5 |
| Micro Step | 1, 2, 8, 16 |
| Maximum PWM frequency (Hz) | 2000 |
| Hold Current Adjustment | 50% or 100% |
| Operating Temperature Range (°C): | -10 to 50 |
| Length (mm): | 82 |
| Width (mm) | 50 |
| Height (mm) | 30 |
| Weight (g): | 120 |
| Shipping Weight | 0.13 kg |
| Shipping Dimensions | 9 × 6 × 4 cm |
Package Includes :
1 x TB6600 Stepper Motor Driver Controller 8~50V 4.5A
TB6600 Stepper Motor Driver Controller 8~50V 4.5A Overview
The TB6600 Stepper Motor Driver Controller 8~50V 4.5A is a single-axis CNC driver based on the TB6600HG chip, designed to deliver up to 200 W of output power for high-torque stepper motors. It accepts 8–50 V DC (36 V recommended) and provides precise microstepping control for hobbyist and professional CNC, engraving, and robotics projects.
Key Features of TB6600 Stepper Motor Driver Controller 8~50V 4.5A
- Wide input voltage range: 8 V–50 V DC (36 V recommended) with built-in protection
- Adjustable output current from 0.3 A to 4.5 A (peak 5 A) via onboard potentiometer
- Selectable microstepping: 1, 2, 8, and 16 steps for smooth motion
- High‐frequency PWM modulation up to 200 kHz for low noise and heat
- Intelligent current control for stable torque and reduced motor heating
- Genuine product, fast shipping across India from Zbotic
Applications and Use Cases
- Single-axis CNC routers and milling machines
- Laser engravers and cutting systems
- 3D printer XY or Z-axis drive modules
- Robotic arms and automated pick-and-place platforms
- Precision positioning in pick-and-place tables or XY stages
- DIY motion control projects requiring up to 4.5 A phase current
How to Use TB6600 Stepper Motor Driver Controller 8~50V 4.5A
Connect a suitable DC supply (8–50 V) to the driver’s VCC and GND terminals, wire your two-phase stepper motor to the A+/A– and B+/B– outputs, and set microstep resolution and current limit using the DIP switches and potentiometer. Feed TTL-level pulse (PUL+/-) and direction (DIR+/-) signals from your control board, enable the driver via ENA terminals, and ensure proper heat dissipation within the –10 °C to +45 °C operating range.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
What supply voltage is required for the TB6600 driver?
The TB6600 accepts 8 V to 50 V DC (36 V recommended) and includes over-voltage and reverse-polarity protection. Use a stable DC source within this range for reliable operation.
How do I set the microstep resolution?
Onboard DIP switches let you choose 1, 2, 8, or 16 microsteps per full step. Refer to the silk-screen legend next to the switches to match the correct on/off combination for your desired resolution.
Can the TB6600 handle continuous 4.5 A output current?
Yes. The driver supports adjustable phase currents from 0.3 A to 4.5 A (peak 5 A). Turn the current-limit potentiometer to select 1 A, 2.2 A, 3.3 A, or 4.5 A according to your motor’s rated current.
Automatic Solar Tracker Using Servo Motor and LDR Sensors
A fixed solar panel captures only a fraction of the sunlight it could if it were always pointed...
Read More →
How to Choose Motor Driver for Your DC Motor: Formula Guide
Picking the wrong motor driver is one of the most common and expensive mistakes in robotics. Too weak...
Read More →
Stepper Motor Driver EMI: Shielding & Noise Reduction Techniques
Stepper motor drivers are among the noisiest components in any electronics project. The fast-switching MOSFET H-bridges in drivers...
Read More →Technical Specifications
| Model | TB6600 |
|---|---|
| Operating Voltage | 50V |
| Current Rating | 4.5A |
| SKU | AI2618 |
| Weight | 0.00052 kg |
| Availability | Out of Stock |
Applications & Use Cases
The TB6600 Stepper Motor Driver Controller 8~50V 4.5A is a versatile stepper motor drivers used across a wide range of applications including CNC machines, 3D printers, robotics, camera sliders, and pick-and-place machines.
Common use cases:
- Driving NEMA 17 stepper motors in a 3D printer
- Building a CNC router
- Precise positioning in a robotic arm
This product is ideal for CNC builders, 3D printer makers, and robotics engineers.
Technical Tip: TMC2208/2209 drivers offer silent operation via StealthChop. A4988/DRV8825 are more affordable. Set current limit via the onboard potentiometer.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
