This 1 Channel 12V Relay Module is capable of actuating 240VAC/30A circuits safely – Eliminating dangers of high current circuits for users.Operating Voltage – 12VDC Max Current Control – 30A Max Voltage Control (AC) – 240V Max Voltage Control (DC) – 30VOutput Modes – Normally Open / Normally Closed Dimensions – 40 x 34 x 22mm Weight – 35gDespite being able to actuate high current and high voltage circuits, the relay itself operates on up to 12VDC, which is safe for users if a fault occurs.Without a relay, if the high current circuit were to leak directly into a user, it could cause serious harm to a user and damage to the components.
LED Type: 5050 SMD RGB
Length: 5 meters per roll
Power Consumption: 22.5 Watts
Operating Voltage: 12VDC
Controller Compatibility: Compatible with RGB LED controllers (not included)
Lifespan: Over 40,000 hours
Waterproof: Yes
This is a relay module with two channels that supports Modbus RTU protocol. It operates on a 5V DC power supply and has a current rating of 1A. It can work in temperatures ranging from -25℃ to 85℃ and humidity levels from 5% to 95% RH.
8-channel 2 AMP Solid State Relay board.
Control 8 loads of up to 2 amps each at 120 V or 240 VAC.
Good for lighting, Holiday displays etc.
With 8 Solid State Relays: 2A at 100 to 240 VAC.(50/60 Hz).
Power supply: 5 V DC (160 mA)
Trigger Current: 2mA.
Trigger Voltage: 3.3V-5V.
Input Voltage: DC3.6V-6V
Input Current: 2A-5A
Output Voltage: DC 400KV (Please pay attention to safety when used)
Input Line Length: about 100mm (red is positive)
Output Line Length: about 160mm
Diode effusion protection
Short response time
Onboard Relay:12V,10A/250V AC 10A/30V DC relay
Transmission distance : 400m (max)
Operating Voltage:12 V
Baud Rate: 9600
Operating Voltage: 24V DC
Two separate LEDs for On/Off indication of the Relay
Triggering input voltage 3.3V – 5V 4)
Back EMF protection
Equipped with high-current relay 10A@250VAC / 10A@30VDC
Freewheeling diode to protect your microcontroller
Mounting holes provided
Supply Voltage: DC 24V
Maximum Operating Current: 190mA
Trigger Mode: High and low-level trigger
Load Voltage: DC 30V / AC250
Load Current: 30A
Relay Life: more than 100,000 times