This is the 36V variant of the Brushless Motor Controller DC 12-36V 500W PWM Driver Board in Brushed / Brushless DC motor Driver. Available at ₹1,104.17 (₹935.74 + GST) with free shipping across India.
Product Description
This product is a DC 12-36V 500W PWM Driver Board for 3-phase brushless sensorless motors. However, it may not work well with some motors of this type. If you experience any problems with the motor, such as jittering, reversing, high current, unstable speed, low efficiency, or inability to start with a load, you can adjust the resistance and capacitance of the driver board to optimize the performance.
Specifications and Features:
- Protection: Overload protection, locked-rotor protection, over-current protection
-
Analog voltage speed regulation: 0-5V
- Operating temperature: -40 ~ 85℃
- Drive power: ≤ 500W (related working voltage)
- Speed control function: voltage speed regulation or single-chip
- microcomputer control PWM speed regulation
Wiring Diagram:
Pin Connection:
Control port:
Power port :
Application notes:
- Confirm that the voltage and power parameters of the motor do not exceed the range of the driver board as specified.
- The JYQD-V6.3E2 driver board is a bare board without housing and a heatsink. If the power of the motor is below 60W, it does not need to add a heatsink, It only needs to ensure normal ventilation and wall insulation. If the power of the motor is more than 100W, it must add a heatsink.
- Please take note that the JYQD-V6.3E2 driver board has no anti-reverse connection protection, it will permanently damage the driver board if reversed polarity connection.
- The 5V output port on the driver board prohibits connecting an external device. It is only applicable to the external potentiometer and switch of the board for speed regulation and reversal.
- The “Signal” terminal on the JYQD-V6.3E2 driver board is the motor speed pulse output signal (push-pull output), and the maximum output current is less than 5mA.
Specification:
| Voltage Range(V) | 12 – 36 |
|---|---|
| Current handling Capacity(A) | 15 |
| Power handling Capacity(W) | 500 |
| Length (mm): | 63 |
| Width (mm) | 42.5 |
| Height (mm) | 17 |
| Weight (g): | 30 |
| Shipping Weight | 0.033 kg |
| Shipping Dimensions | 10 × 6 × 2 cm |
Package Includes:
1 x Brushless Motor Controller DC 12-36V 500W PWM Driver Board
Micro Servo vs Standard Servo: Size, Torque & Use Cases
Table of ContentsHow Servo Motors WorkMicro Servo: SG90 and SimilarStandard Servo: MG996 and SimilarDetailed Comparison TableUnderstanding Torque RatingsPlastic...
Read More →
MG996R Servo Motor: High Torque Projects & Control Guide
The MG996R servo motor is one of the most popular high-torque servos in the maker and robotics community....
Read More →
Raspberry Pi Motor Control with L298N: Python Code Guide
Table of Contents Why L298N with Raspberry Pi? Hardware Requirements Wiring Diagram: Pi to L298N to Motor GPIO...
Read More →Technical Specifications
| Power Rating | 500W |
|---|---|
| SKU | AI1496 |
| Weight | 0.08 kg |
| Availability | Out of Stock |
Applications & Use Cases
The Brushless Motor Controller DC 12-36V 500W PWM Driver Board is a versatile brushed / brushless dc motor driver used across a wide range of applications including robot motor control, DC motor speed regulation, H-bridge circuits, electric vehicle drives, and conveyor belt control.
Common use cases:
- Bidirectional motor control for a robot
- PWM speed control of a DC motor
- Building a motorized platform
This product is ideal for robotics engineers and motor control enthusiasts.
Technical Tip: L298N is a classic dual H-bridge driver. For higher efficiency, consider MOSFET-based drivers like BTS7960.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
