This is the 5V variant of the 5V 2A 8-Channel SSR G3MB-202P Solid State Relay Module (Low level Trigger) in Relay Modules. Available at ₹647.82 (₹549.00 + GST) with free shipping across India.
5V 2A 8-Channel SSR G3MB-202P Solid State Relay Module (Low level Trigger)
This 5V 2A 8-Channel SSR G3MB-202P Solid State Relay Module is based on the G3MB SSR relay which can control up to 2A at 240VAC. This is an 8 Channel SSR relay module, each relay channel has 3 separate terminals, NO (Normal Open), COM (Common), NC (Normal Closed).
A Solid State Relay is similar to a mechanic relay where it can be controlled through a digital signal. Solid State Relay generates no noise and has a much longer lifespan in compared to the traditional mechanic relay.
When the input logic voltage is applied to the coil, the NC will disconnect from the COM breaking the conductivity between the two. At the same time, the NO will connect with the COM allowing conductivity between them. Depending on your wiring this will turn on or off the connected load.
5V 2A 8-Channel SSR G3MB-202P Solid State Relay Module Can be directly controlled by Arduino and other microcontrollers It is Eight channels relay interface board able to control various appliances and equipment with large current.
Input parts :
- DC : connect power positive
- DC-: connect power negative
- CH1: relay module signal trigger point (Effective low-level trigger)
- CH2: relay module signal trigger point (Effective low-level trigger)
- CH3: relay module signal trigger point (Effective low-level trigger)
- CH4: relay module signal trigger point (Effective low-level trigger)
- CH5: 5-way relay module signal triggering end (low-level trigger valid)
- CH6: 6-way relay module signal triggering end (low-level trigger valid)
- CH7: 7-way relay module signal triggering end (low-level trigger valid)
- CH8: 8-channel relay module signal triggering end (low-level trigger valid)
Note:
- Power must be DC voltage and need to be consistent with the voltage relay. The Board is available in Red Color.
- This Relay module is a Low-Level Trigger Module. Please note it before purchase.
- Product Image May vary in terms of Brand Name on relay according to the availability of Supplier
Features:
- 8 channel 2 AMP Solid State Relay board
- Control 8 loads of up to 2 amps each at 120V or 240V AC.
- Good for lighting, holiday displays etc.
- Has been assembled, and the electrical test passed.
- Led indicator for each relay.
- Use it to control various appliances and other equipment with a large current.
- It can be controlled directly by Microcontroller.
Specification:
| Part Number | G3MB-202P |
|---|---|
| Working Current(mA) | 16 |
| Trigger Current (mA) | 2 |
| Trigger Voltage (VDC) | 5 |
| Switching Voltage (VAC) | 240@2A |
| Isolation | Phototriac |
| Zero Cross | Yes |
| Length (mm): | 105 |
| Width (mm): | 50 |
| Height (mm): | 20 |
| Weight (g): | 70 |
Package Includes:
1 x 5V 8 Channel SSR Solid State Relay Module
ESP32 Captive Portal: Wi-Fi Credentials Entry Without Code
An ESP32 captive portal for Wi-Fi credentials setup is an essential feature for any IoT product you plan...
Read More →
How to Use GSM/GPS Module for IoT Tracking
Building a real-time vehicle tracker or remote sensor with GSM and GPS modules on Arduino is one of...
Read More →
ESP32 Bluetooth Mesh: Network of Smart Sensor Nodes
Building an ESP32 Bluetooth mesh nodes network opens up a new paradigm for sensor deployments that covers areas...
Read More →Technical Specifications
| Operating Voltage | 5V |
|---|---|
| Current Rating | 2A |
| SKU | AI2406 |
| Weight | 0.09 kg |
| Availability | Out of Stock |
Applications & Use Cases
The 5V 2A 8-Channel SSR G3MB-202P Solid State Relay Module (Low level Trigger) is a versatile relay modules used across a wide range of applications including home automation, industrial control, IoT projects, Arduino/Raspberry Pi interfacing, and motor control.
Common use cases:
- Switching high-voltage AC appliances with a microcontroller
- Building a smart home relay board
- Automating irrigation pumps in agriculture
This product is ideal for electronics engineers, IoT developers, and automation hobbyists.
Technical Tip: Use optocoupler-isolated relay modules to protect your microcontroller. Match relay coil voltage to your MCU logic level (3.3V or 5V).
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
