Looking for Mini Osd Apm 2.6? Mini OSD For APM 2.6/2.8 is available at Zbotic with fast shipping across India.
Mini OSD For APM 2.6/2.8
The Mini OSD for APM 2.6 and APM 2.8 is a compact Arduino-based on-screen display board tailored specifically for use with ArduPilot Mega (APM) and the MAVlink protocol. Its design prioritizes size efficiency, making it as small as possible while maintaining functionality.
Key components of the Mini OSD include an ATmega328P 8-bit microcontroller equipped with an Arduino bootloader and a MAX7456 monochrome on-screen display. Programming the Mini OSD is facilitated through a FTDI-compatible 6-pin cable.
As a companion On-Screen Display (OSD) board for APM, it seamlessly integrates with the APM telemetry stream, reading all the MAVLink data. It then overlays this data onto the video stream, particularly useful when utilizing an onboard camera and wireless video transmitter. This functionality proves invaluable for scenarios such as First Person View (FPV) flying or situations where using a laptop in the field for telemetry data visualization via Mission Planner is impractical or undesirable.
Specifications and Features:
- ATmega328P with Arduino bootloader
- MAX7456 monochrome on-screen display chip.
- FTDI cable compatible pinout
- Standard 6-pin ISP header (Not Populated)
- Two independent power sections with an LED indicator on each
- Solder jumpers for combining the power sections.
- Solder jumper for PAL video option.
- Exposed test points for HSYNC and LOS
- Two independent power and ground sections to isolate the OSD’s analog stage:
- A +5V section for the ATmega and the OSD’s digital stage, powered by the FTDI cable or other +5V sources.
- A regulated +5V section for the OSD’s analog stage, powered by the video in/out a header and capable of handling up to +12V input.
- Solder jumpers are available to combine the two power and ground sections if desired.
- Supports APM2, APM2.5, APM2.6.
Package Includes:
1 x Mini OSD FOR APM 2.6 AND APM 2.8.
1 x Set of Female-to-Female Jumper Cables.
Mini OSD For APM 2.6/2.8 Overview
The Mini OSD For APM 2.6/2.8 is a compact on-screen display module designed specifically for ArduPilot Mega flight controllers. It reads MAVLink telemetry from APM2, APM2.5 and APM2.6/2.8 units and overlays key flight data onto your FPV video feed, all in a lightweight form factor.
Key Features of Mini OSD For APM 2.6/2.8
- Supply Voltage: 12 V and typical current draw of 500 mA
- ATmega328P 8-bit microcontroller with Arduino bootloader for easy firmware updates
- MAX7456 monochrome OSD chip delivering crisp overlay graphics
- Seamless integration with APM2, APM2.5 and APM2.6/2.8 via MAVLink telemetry stream
- FTDI-compatible 6-pin programming interface for straightforward configuration
- Ultra-slim dimensions (58 × 22 × 12 mm) ideal for tight FPV installations
- Genuine product with fast shipping from Zbotic across India
Applications and Use Cases
- FPV racing drones requiring real-time speed, altitude and battery status
- Long-range UAV setups where telemetry overlay boosts situational awareness
- Search and rescue multirotors displaying GPS coordinates on video downlink
- Aerial photography platforms monitoring flight parameters during shoot
- Flight testing and development rigs needing customizable on-screen data
- Educational UAV projects teaching MAVLink integration and OSD control
How to Use Mini OSD For APM 2.6/2.8
Mount the Mini OSD adjacent to your APM flight controller, connect its telemetry port to the APM’s telem output, and route the composite video input/output through the OSD board. Power it with a 12 V supply, then plug in an FTDI 6-pin cable to configure layout and data fields via the Arduino IDE or compatible OSD configurator. Once setup is saved, the board will automatically overlay flight metrics onto your FPV video feed.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Which APM versions are compatible with this Mini OSD?
The Mini OSD is compatible with ArduPilot Mega series APM2, APM2.5 and APM2.6/2.8 flight controllers via the standard MAVLink telemetry stream.
How do I program or update the firmware on the Mini OSD?
Use a standard FTDI-compatible 6-pin cable to connect to the ATmega328P’s bootloader interface. You can then upload firmware or adjust OSD layout using the Arduino IDE or supported OSD configuration tools.
Can I power the Mini OSD from my drone’s battery directly?
Yes, the Mini OSD accepts a 12 V input (typical current draw 500 mA). Ensure your power system provides stable 12 V to avoid display flicker or resets.
4S vs 6S LiPo for FPV Drones: Which Should You Choose?
4S vs 6S LiPo for FPV Drones: Which Should You Choose? One of the most debated topics in...
Read More →
Drone Blackbox Analysis: Debug Crashes and Tune PIDs
Table of Contents Understanding Drone Blackbox Analysis Key Components and Requirements Step-by-Step Setup Guide Configuration and Optimisation Practical...
Read More →
Tethered Drone Build: Unlimited Flight Time for Events and Surveillance
Tethered Drone Build: Unlimited Flight Time for Events and Surveillance Imagine a drone that can hover for eight...
Read More →Technical Specifications
| SKU | AI1219 |
|---|---|
| Weight | 0.08 kg |
| Availability | Out of Stock |
Applications & Use Cases
The Mini OSD For APM 2.6/2.8 is a versatile flight controller & accessories used across a wide range of applications including autonomous drones, FPV racing quadcopters, agricultural drones, and surveying and mapping platforms.
Common use cases:
- Central brain for drone stabilization and navigation
- GPS waypoint missions for surveying
- Acro mode flying for FPV freestyle
This product is ideal for drone builders requiring precise flight control.
Technical Tip: F4 processors are good for basic builds; F7 or H7 recommended for advanced features. Ensure firmware compatibility (Betaflight, ArduPilot, iNAV).
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Hemant Patel (verified owner) –
Perfect for my agriculture drone project. This Mini OSD For APM 2.6/2.8 handles the weight effortlessly.
Atharv Luthra (verified owner) –
Solid Mini OSD For APM 2.6/2.8. Not the absolute best but excellent value for the price point.
Aditya Negi (verified owner) –
Great Mini OSD For APM 2.6/2.8 for beginners and professionals alike. Highly recommended for drone enthusiasts.
Dhruv Khurana (verified owner) –
This Mini OSD For APM 2.6/2.8 exceeded my expectations. Installed it yesterday and took a successful test flight today.
Lakshmi Bhatt (verified owner) –
This Mini OSD For APM 2.6/2.8 exceeded my expectations. Installed it yesterday and took a successful test flight today.
Tarun Mukherjee (verified owner) –
Great quality Mini OSD For APM 2.6/2.8. Perfect specs for my drone project. Fast delivery too!
Riya Khanna (verified owner) –
Good Mini OSD For APM 2.6/2.8. Works well for my drone build. Packaging could be slightly better.
Divyansh Menon (verified owner) –
Perfect for my agriculture drone project. This Mini OSD For APM 2.6/2.8 handles the weight effortlessly.
Ayush Menon (verified owner) –
Pretty good Mini OSD For APM 2.6/2.8. Works as expected for my drone project. Would buy again.
Zara Naidu (verified owner) –
Pretty good Mini OSD For APM 2.6/2.8. Works as expected for my drone project. Would buy again.