ESP32-SOLO-1 IoT Development Board Module for Arduino

Looking for Esp32 Module? ESP32-SOLO-1 IoT Development Board Module for Arduino is available at Zbotic with fast shipping across India.

ESP32-SOLO-1 IoT Development Board Module for Arduino

The ESP32 is a series of low-cost, low-power system on a chip microcontrollers with integrated Wi-Fi and dual-mode Bluetooth.

The ESP32-SOLO-1 is a powerful, generic Wi-Fi + Bluetooth + Bluetooth LE MCU module suitable for a wide range of applications, from low-power sensor networks to demanding tasks like voice encoding, music streaming, and MP3 decoding.

The ESP32 can operate as a complete standalone system or as a subordinate device to a host MCU, thereby reducing the communication stack overhead on the main application processor. It can interface with other systems to provide Wi-Fi and Bluetooth functionality through its SPI/SDIO or I2C/UART interfaces.

The ESP32-DevKitC is a low-footprint, entry-level development board within the ESP32 series. This board boasts a rich set of peripherals, and the built-in ESP32 pinout is designed for hassle-free prototyping.

Features

1. ESP32-SOLO-1 can be programmed in different programming environments
2. On board Wi-Fi + Bluetooth + Bluetooth LE MCU connectivity
3. Use in IoT Projects
4. Small and compact Dev module
5. You can connect with a router or your devices
6. Easy to learn & use
7. Rapid Prototyping
8. Flexible and Feature-Rich
9. Breadboard-Friendly

Specifications

1. Antenna: On board Antenna
2. Product: IoT Development Board
3. Model: ESP32-SOLO-1
4. The CPU clock frequency: 80 MHz to 240 MHz
5. Microprocessor: Tensilica Xtensa LX6 dual core
6. Voltage: 3.6V
7. Current: 500mA
8. ROM: 448 KB ROM
9. SRAM: 520 KB SRAM
10. Integrated crystal 40 MHz crystal
11. QSPI flash/SRAM: 4 × 16 MB
12. On board: Wi-Fi + Bluetooth + Bluetooth LE MCU
13. Operating Temperature: –40 °C ~ +85 °C

Package Includes

• 1 x ESP32-SOLO-1 Development Board Module

datasheet

ESP32-SOLO-1 IoT Development Board Module for Arduino Overview

The ESP32-SOLO-1 IoT Development Board Module for Arduino is a compact microcontroller board combining Wi-Fi and dual-mode Bluetooth capabilities. Designed for rapid prototyping and embedded projects, this board works seamlessly with the Arduino ecosystem to deliver reliable wireless connectivity in a standalone or adjunct configuration.

Key Features of ESP32-SOLO-1 IoT Development Board Module for Arduino

• Integrated Wi-Fi and Bluetooth/Bluetooth LE radio for flexible wireless communication
• Single-core MCU design optimized for low-power applications
• Broad industrial temperature tolerance for deployment in harsh environments
• Arduino IDE compatibility simplifies code development and uploading
• Capable of handling audio tasks such as voice encoding and MP3 decoding
• Genuine ESP32-SOLO-1 modules with fast shipping from Zbotic across India

Applications and Use Cases

• Environmental sensor nodes transmitting data over Wi-Fi networks
• Home automation controllers for lighting, HVAC, or security systems
• Portable audio streaming devices leveraging onboard MP3 decoding
• Wearable connectivity modules for health and fitness monitors
• Mesh networking prototypes for large-scale IoT deployments

How to Use ESP32-SOLO-1 IoT Development Board Module for Arduino

Begin by installing the ESP32 board definitions in your Arduino IDE, then connect the module via its USB interface to your PC. Select “ESP32-SOLO-1” from the board manager, choose the correct COM port, write or load your sketch, and hit Upload. Once programmed, power the board and monitor serial output to verify Wi-Fi or Bluetooth operations.

Why Buy from Zbotic?

• Genuine Products: All items sourced from authorized distributors
• Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
• Free Shipping: Free delivery on qualifying orders
• COD Available: Cash on Delivery, UPI, cards, net banking
• Technical Support: Expert help for setup and troubleshooting
• Easy Returns: Hassle-free replacement for defective products

Frequently Asked Questions

How do I program the ESP32-SOLO-1 board?

Install the ESP32 package in Arduino IDE, select the ESP32-SOLO-1 profile, connect via USB, and use the built-in uploader. No additional bootloader flashing is required.

Can the module run without an external microcontroller?

Yes. The ESP32-SOLO-1 has a standalone MCU capable of executing complete applications, handling connectivity, and driving peripherals directly.

What interface options are available for peripherals?

The board exposes GPIO pins for SPI, I2C, UART, PWM, and analog input, enabling connection to sensors, displays, and actuators in your project.

Related Articles:

Home Assistant Integration: ESP32 Sensor with ESPHome

Integrating a Home Assistant ESP32 sensor using ESPHome is the most beginner-friendly way to build a fully functional,...

Read More →

ESP32 Provisioning App: Configure WiFi Without Hardcoding

If you've ever built an ESP32 project, you know the frustration of hardcoding WiFi credentials into your firmware....

Read More →

MQTT Broker Setup: Mosquitto on Raspberry Pi for IoT

Setting up an MQTT broker with Mosquitto on a Raspberry Pi for IoT is one of the most...

Read More →