This is the Red variant of the GA12-N20 12V 150RPM Micro DC Reducer Motor Encoder with Wire in N20 Motor with Encoder, N20 Micro Gear Motor. Available at ₹515.66 (₹437.00 + GST) with free shipping across India.
Looking for Ga12 Motor 12v? GA12-N20 12V 150RPM Micro DC Reducer Motor Encoder with Wire is available at Zbotic with fast shipping across India.
This is a light-weight, high-torque N20 12v 150 RPM Metal Gear Micro DC Encoder Motor with Precious Metal Brush. It is suitable for various industrial, home appliance and hobby applications. It has an all-metal gearbox assembly that provides amazing torque for its size. It also has precious metal brushes, not carbon brushes, which extend its working life compared to motors with carbon brushes.
The N20 all-metal geared motor has a much higher torque-to-size ratio than other motors of this size, whether they have metal or plastic gears. The BO motor series 1 and series 2 and the centre shaft 12 V motors are widely used for small industrial or robotic projects, but the N20 motor surpasses them in torque, sturdiness, reliability and working life, as the specifications below show.
The N20 motor is ideal for small IOT (Industrial IOT) products such as electric locks, webcam pan-tilts and other similar actuators that need good torque in limited space and weight. For hobby products such as robotic cars, micromice, electric boats and other small motor-related projects that require low power consumption and optimal pricing, the N20 all-metal gear motor is a perfect fit.
This N20 encoder motor can accurately control the motor position.
This N20 encoder motor is compatible with our PID Servo controller Drive.
Model No: GA12 N20
Motor Type: Center Shaft DC Encoder Geared Motor
Base Motor RPM: 30000
RPM at output shaft: 150RPM
Rated Voltage: 12V DC
Gear ratio: 1:200
No Load Current: 10 mA
Rated Current: 40 mA
Stall Current: 1 A
Rated Torque: 0.1 Kgcm
Stall Torque: 2 Kgcm
Shaft Type: D-type Single Side
Shaft Diameter (mm): 3mm
Shaft Length (mm) : 9mm
Weight (gm): 15
Red – Motor +
White – Motor –
Yellow – Encoder B
Green – Encoder A
Black – Vcc (5 V)
Blue – Gnd
Package Includes:
1 x GA12-N20 12V 150RPM Micro DC Reducer Motor Encoder with Wire
About Ga12 Motor 12v
GA12-N20 12V 150RPM Micro DC Reducer Motor Encoder with Wire is available at Zbotic, India’s trusted electronics and robotics store. Manufactured by Generic, this product is designed for hobbyists, students, and professionals working on electronics, robotics, and DIY projects.
Product Details
- Brand: Generic
- SKU: AI4181
- Price: Rs.556
- Category: N20 Motor with Encoder
Why Buy from Zbotic?
Zbotic offers a wide range of electronics components, development boards, sensors, and robotics parts. All products are quality-checked and shipped within 24 hours. Free shipping on orders above Rs.999. We offer COD (Cash on Delivery) and secure online payment options. Our customer support team is available to help with technical queries about Ga12 Motor 12v and other products.
Applications
Ga12 Motor 12v can be used in a variety of projects including Arduino projects, Raspberry Pi builds, drone assembly, 3D printing, IoT applications, and educational experiments. Whether you are a beginner or an advanced user, this component provides the reliability and performance you need. Order your Ga12 Motor 12v today and start building.
Ga12 Motor 12v Overview
This is a light-weight, high-torque N20 12v 150 RPM Metal Gear Micro DC Encoder Motor with Precious Metal Brush. It is suitable for various industrial, home appliance and hobby applications.
The Ga12 Motor 12v is designed for electronics enthusiasts, engineers, and hobbyists working on IoT systems, environmental monitoring, automation, and data acquisition projects. As a N20 Motor with Encoder product, it provides the performance and reliability needed for both prototyping and production-level projects. Whether you are building your first circuit or designing a complex system, the Ga12 Motor 12v delivers consistent results that you can depend on.
Key Features of Ga12 Motor 12v
- Quality Assured: Every unit is tested before shipping to ensure reliability
- Wide Compatibility: Compatible with Arduino, ESP32, Raspberry Pi, STM32, and other development boards
- Easy Integration: Well-documented with community support and code examples available online
- Fast Shipping: Ships within 24 hours with tracking from Zbotic warehouse
Applications and Use Cases for Ga12 Motor 12v
The Ga12 Motor 12v is versatile and can be used in numerous applications across different industries and project types:
- Environmental monitoring and weather stations
- Industrial automation and process control
- IoT-based smart home systems
- Agricultural monitoring (soil moisture, temperature, humidity)
- Robotics navigation and obstacle detection
- Wearable health monitoring devices
These are just some of the most common applications. The Ga12 Motor 12v can be adapted for many other uses depending on your specific project requirements. Browse our full range of N20 Motor with Encoder products to find complementary components for your build.
How to Use Ga12 Motor 12v
Connect the sensor to your microcontroller using the recommended wiring diagram. Most sensors use either analog output (connect to ADC pin) or digital protocols like I2C or SPI. Power the sensor with the appropriate voltage (check specifications). Read sensor data using the corresponding library in Arduino IDE or your preferred development environment. Calibrate the sensor if required for accurate measurements. For I2C sensors, connect SDA and SCL lines with pull-up resistors. For analog sensors, use appropriate voltage dividers if the output exceeds your ADC reference voltage.
For detailed wiring diagrams, code examples, and tutorials for the Ga12 Motor 12v, check the product documentation or search for community-created guides online. Our support team at Zbotic is also available to help with technical questions.
Why Buy Ga12 Motor 12v from Zbotic?
Zbotic is India’s trusted online store for electronics components, development boards, sensors, motors, and robotics parts. When you buy the Ga12 Motor 12v from Zbotic, you get:
- Genuine Products: All items are sourced from authorized distributors and quality-checked
- Fast Shipping: Orders ship within 24 hours with real-time tracking
- Free Shipping: Free delivery on orders above Rs.999 across India
- COD Available: Pay via Cash on Delivery, UPI, cards, or net banking
- Technical Support: Expert assistance for wiring, coding, and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions about Ga12 Motor 12v
Where can I buy Ga12 Motor 12v in India?
You can buy Ga12 Motor 12v online at Zbotic.in with fast shipping across India. We offer genuine products with COD and multiple online payment options.
What is the price of Ga12 Motor 12v?
The Ga12 Motor 12v is available at Rs.556 at Zbotic. Prices may vary based on availability and offers.
What voltage does this sensor require?
Check the specifications section above for the exact operating voltage. Most sensors work with 3.3V or 5V DC power supply.
How do I connect this sensor to Arduino?
Connect VCC to 5V (or 3.3V as specified), GND to GND, and the signal/data pin to an appropriate digital or analog pin on the Arduino. Refer to the wiring diagram in the product documentation.
Is this sensor compatible with Raspberry Pi?
Yes, most sensors are compatible with Raspberry Pi. For 5V sensors, you may need a logic level converter since Raspberry Pi GPIO pins operate at 3.3V.
Related Products
- GA12-N20 12V 100RPM Micro DC Reducer Motor Encoder with Wire
- GA12-N20 12V 1000RPM Micro DC Reducer Motor Encoder with Wire
- N20 12V 60RPM Micro Metal Gear Motor With Encoder
Worm Gear Motor Applications: Self-Locking Mechanism Guide
The worm gear motor's self-locking property is one of the most underappreciated features in the robotics and automation...
Read More →
Stepper Motor Microstepping: 1/2, 1/4, 1/8, 1/16 Explained
Microstepping is one of the most misunderstood concepts in stepper motor control. Many makers set their drivers to...
Read More →
Mini Water Pump Guide: DC Submersible & Peristaltic Pumps for Arduino
A mini water pump opens up an enormous range of maker projects — from automated plant watering systems...
Read More →Technical Specifications
| Model | GA12-N20 |
|---|---|
| Operating Voltage | 12V |
| Speed | 150 RPM |
| Color | Red |
| SKU | AI4181 |
| Weight | 0.02 kg |
| Availability | In Stock |
Applications & Use Cases
The GA12-N20 12V 150RPM Micro DC Reducer Motor Encoder with Wire is a versatile n20 motor with encoder used across a wide range of applications including electronics projects, DIY builds, prototyping, and educational experiments.
Common use cases:
- Integrating into a custom electronics project
- Learning and experimenting with circuits
- Replacing or upgrading components in existing setups
This product is ideal for electronics enthusiasts, engineers, and students.
Technical Tip: Always verify voltage and current requirements before connecting to your circuit. Check datasheets for detailed specifications and pin configurations.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Vidya Malhotra (verified owner) –
Good GA12-N20 12V 150RPM Micro DC Reducer. Works as described. Calibration needed some patience but results are good.
Pranav Khurana –
This GA12-N20 12V 150RPM Micro DC Reducer is excellent for the price. My data logging project is working perfectly now.
Arjun Bhatt (verified owner) –
Great GA12-N20 12V 150RPM Micro DC Reducer. Using it in my smart agriculture system. Reliable measurements every time.
Sumit Desai (verified owner) –
Okay GA12-N20 12V 150RPM Micro DC Reducer. Had to add a capacitor to stabilize readings. Works now.
Ashwin Chopra (verified owner) –
Outstanding accuracy from this GA12-N20 12V 150RPM Micro DC Reducer. Compared with a professional instrument, readings match closely.
Zara Bhandari (verified owner) –
Good quality GA12-N20 12V 150RPM Micro DC Reducer. Some variation in readings but within acceptable range.
Chirag Batra (verified owner) –
Love this GA12-N20 12V 150RPM Micro DC Reducer. Response time is fast and readings are stable.
Kartik Kamath (verified owner) –
Excellent sensitivity and range on this GA12-N20 12V 150RPM Micro DC Reducer. Works better than I expected.
Ashish Agarwal (verified owner) –
Good GA12-N20 12V 150RPM Micro DC Reducer. Works as described. Calibration needed some patience but results are good.
Varun Rao (verified owner) –
This GA12-N20 12V 150RPM Micro DC Reducer is a must-have for sensor projects. Plug and play with Arduino.
Gaurav Yadav (verified owner) –
Good GA12-N20 12V 150RPM Micro DC Reducer. Works as described. Calibration needed some patience but results are good.
Dev Banerjee –
Pretty good GA12-N20 12V 150RPM Micro DC Reducer. Documentation could be better but the sensor itself is solid.
Manish Batra –
Perfect GA12-N20 12V 150RPM Micro DC Reducer for my automation project. Integrates seamlessly with my microcontroller.
Tushar Kumar (verified owner) –
Outstanding accuracy from this GA12-N20 12V 150RPM Micro DC Reducer. Compared with a professional instrument, readings match closely.
Ashwin Verma (verified owner) –
Nice GA12-N20 12V 150RPM Micro DC Reducer. Readings are mostly accurate. Good enough for my hobby project.
Suresh Arora –
Excellent sensitivity and range on this GA12-N20 12V 150RPM Micro DC Reducer. Works better than I expected.
Sneha Sethi (verified owner) –
Bought this GA12-N20 12V 150RPM Micro DC Reducer for my college project. Accurate readings, easy to code. Very happy!
Eshan Hegde (verified owner) –
Perfect for my weather station. This GA12-N20 12V 150RPM Micro DC Reducer gives consistent readings day and night.
Tanmay Gupta (verified owner) –
Excellent sensitivity and range on this GA12-N20 12V 150RPM Micro DC Reducer. Works better than I expected.
Kartik Bose (verified owner) –
This GA12-N20 12V 150RPM Micro DC Reducer works great with Arduino. Easy to wire up and code.
Urmi Bhatt (verified owner) –
Pretty good GA12-N20 12V 150RPM Micro DC Reducer. Documentation could be better but the sensor itself is solid.
Simran Bajaj (verified owner) –
Decent GA12-N20 12V 150RPM Micro DC Reducer for the price. Requires proper wiring but works well once set up.
Shreyas Hegde (verified owner) –
Good quality GA12-N20 12V 150RPM Micro DC Reducer. Some variation in readings but within acceptable range.