This is the 5V variant of the 5V 1 Channel Without Light Coupling Relay in Relay Modules. Available at ₹69.62 (₹59.00 + GST) with free shipping across India.
5V 1 Channel Without Light Coupling Relay
The 5V 1-Channel Relay Module without light coupling is designed for various applications. Here are its specifications:
– Supply Voltage: 5V
– Logic Signal Voltage: 3.3V or 5V
– Quiescent Current: 2mA
– Current When the Relay is Active: Approximately 70mA
– Maximum Contact Voltage: 250VAC or 30VDC
– Maximum Current: 10A
The relay normally opens the interface, with a maximum load of AC 250V/10A or DC 30V/10A. It has a trigger current of 5mA and operates at a module working voltage of DC 5V. Each channel of the module can be triggered by a jumper to set either a high level or a low level. The module’s fault-tolerant design ensures that even if the control line is disconnected, the relay will not move. Additionally, it features status indicators: a green power indicator and a red indicator for the 1-channel relay status. All module size interfaces can be directly connected through the terminal block, making it convenient and practical.
Features:
- The 8550 transistor drive, driveability.
- A fixed bolt holes for easy installation.
- It has a relay status indicator led Power LED(Green), 1 relay status indicator LED(Red)
- Relay control interface by single-chip IO.
- Low-level suction close, high-level release.
- Easy to use, simple 3 line structure.
Specification:
| Operating Voltage (VDC) | 3 ~ 5 |
|---|---|
| Trigger Voltage (VDC) | 5 |
| Trigger Current (mA) | 20 |
| Switching Voltage (VAC) | 250@10A |
| Switching Voltage (VDC) | 30@10A |
| Operating Temperature (°C): | -40 to 85 |
| Opt. Relative Humidity(RH) | 20% ～ 85% |
| Storage condition (℃) | – 65 to 175 |
| Length (mm): | 43 |
| Width (mm): | 26.3 |
| Height (mm): | 17 |
| Weight (g): | 14 |
| Shipping Weight | 0.018 kg |
| Shipping Dimensions | 8 × 5 × 2 cm |
Package Includes:
1 x 5V 1 Channel Without Light Coupling Relay.
IoT Beehive Monitor: Weight, Temperature, and Humidity
Table of Contents Why Monitor Beehives Weight Measurement System Temperature and Humidity Sensing Building the Monitor Data Analysis...
Read More →
Modbus to MQTT Bridge: Integrate Legacy Industrial Sensors
Table of Contents Structural Health Monitoring Overview Vibration and Strain Sensors Sensor Node Design Data Collection Architecture Analysis...
Read More →
Troubles with ESP32 Boot Loops: How to Diagnose and Fix
An ESP32 boot loop fix is something every maker eventually needs. You flash your code, the board restarts,...
Read More →Technical Specifications
| Operating Voltage | 5V |
|---|---|
| Channels | 1-channel |
| SKU | AI5246 |
| Weight | 0.02 kg |
| Availability | Out of Stock |
Applications & Use Cases
The 5V 1 Channel Without Light Coupling Relay is a versatile relay modules used across a wide range of applications including home automation, industrial control, IoT projects, Arduino/Raspberry Pi interfacing, and motor control.
Common use cases:
- Switching high-voltage AC appliances with a microcontroller
- Building a smart home relay board
- Automating irrigation pumps in agriculture
This product is ideal for electronics engineers, IoT developers, and automation hobbyists.
Technical Tip: Use optocoupler-isolated relay modules to protect your microcontroller. Match relay coil voltage to your MCU logic level (3.3V or 5V).
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Neeraj Dubey (verified owner) –
Decent 5V 1 Channel Without Light Coupling. Trigger voltage is compatible with both 3.3V and 5V logic.
Ankur Srivastava (verified owner) –
Perfect 5V 1 Channel Without Light Coupling for my IoT project. Controlling appliances remotely works flawlessly.
Tanya Vohra –
Average 5V 1 Channel Without Light Coupling. Works but the relay generates some EMI. Added snubber to fix.
Akash Nayak –
Outstanding quality! This 5V 1 Channel Without Light Coupling has been running 24/7 for months without a single failure.
Varun Kamath –
This 5V 1 Channel Without Light Coupling works perfectly with my Arduino. Easy to wire and control.
Rohit Rawat (verified owner) –
Good 5V 1 Channel Without Light Coupling. Works well. LED indicators are helpful for debugging.
Gaurav Ghosh –
Outstanding quality! This 5V 1 Channel Without Light Coupling has been running 24/7 for months without a single failure.
Ankit Mukherjee (verified owner) –
Perfect 5V 1 Channel Without Light Coupling for my IoT project. Controlling appliances remotely works flawlessly.
Dev Jain –
This 5V 1 Channel Without Light Coupling is robust and well built. PCB quality is excellent.
Lalit Modi (verified owner) –
Nice 5V 1 Channel Without Light Coupling. Relay clicks are clear. Terminal connections are solid.
Rakesh Reddy –
Very satisfied. My smart home system runs on these 5V 1 Channel Without Light Coupling modules. Totally reliable.
Anil Shah (verified owner) –
Average 5V 1 Channel Without Light Coupling. Works but the relay generates some EMI. Added snubber to fix.
Vijay Grewal (verified owner) –
Perfect 5V 1 Channel Without Light Coupling for my IoT project. Controlling appliances remotely works flawlessly.
Siddharth Patel –
Nice 5V 1 Channel Without Light Coupling. Relay clicks are clear. Terminal connections are solid.
Lalit Trivedi (verified owner) –
Love this 5V 1 Channel Without Light Coupling. Click sound is satisfying and switching is instantaneous.
Jai Mehta (verified owner) –
Good quality 5V 1 Channel Without Light Coupling. Using it for my college project. Performs as expected.
Aisha Sen (verified owner) –
Average 5V 1 Channel Without Light Coupling. Works but the relay generates some EMI. Added snubber to fix.
Devansh Luthra (verified owner) –
Perfect 5V 1 Channel Without Light Coupling for my IoT project. Controlling appliances remotely works flawlessly.
Akshat Mehta (verified owner) –
Superb 5V 1 Channel Without Light Coupling! Using it to control my garden irrigation system. Very dependable.
Anand Shetty (verified owner) –
Great quality 5V 1 Channel Without Light Coupling. All channels working. Optocoupler isolation is a nice feature.
Vipin Mehta (verified owner) –
Very satisfied. My smart home system runs on these 5V 1 Channel Without Light Coupling modules. Totally reliable.
Krishna Chopra (verified owner) –
Good quality 5V 1 Channel Without Light Coupling. Using it for my college project. Performs as expected.
Arun Solanki (verified owner) –
Good 5V 1 Channel Without Light Coupling. Works well. LED indicators are helpful for debugging.
Yogesh Chopra –
Great 5V 1 Channel Without Light Coupling. Easy to integrate with NodeMCU for WiFi-based control.
Paras Joshi (verified owner) –
Very satisfied. My smart home system runs on these 5V 1 Channel Without Light Coupling modules. Totally reliable.
Nikita Malhotra (verified owner) –
Outstanding quality! This 5V 1 Channel Without Light Coupling has been running 24/7 for months without a single failure.
Saurabh Solanki (verified owner) –
This 5V 1 Channel Without Light Coupling works perfectly with my Arduino. Easy to wire and control.