Looking for Sx1268 Lora Hat? Waveshare SX1268 LoRa HAT for Raspberry Pi 433MHz Frequency Band is available at Zbotic with fast shipping across India.
This is a Raspberry Pi LoRa HAT based on SX1268, which covers the 433MHz frequency band. It allows data transmission up to 5km through the serial port.
By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.
Comparing with normal LoRa modules, the SX1268 LoRa HAT achieves a longer communication distance, higher rate, lower consumption, better safety, and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.
What’s on Board:
- SX1268 LoRa module
- 74HC125V: voltage level translator
- CP2102: USB TO UART converter
- Raspberry Pi GPIO connector: for connecting with Raspberry Pi
- USB TO UART port
- UART header: for connecting host boards like STM32/Arduino
- SMA antenna connector
- IPEX antenna connector
- Indicators:
- RXD/TXD: UART RX/TX indicator
- AUX: auxiliary indicator
- PWR: power indicator
- UART selection jumpers
- A: control the LoRa module through USB TO UART
- B: control the LoRa module through Raspberry Pi
- C: access Raspberry Pi through USB TO UART
- LoRa mode selection jumpers
Features:
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- Onboard CP2102 USB TO UART converter, for serial debugging
- Brings the UART control interface, for connecting host boards like Arduino/STM32
- 4x LED indicators, easy to check the module status
- LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference
- Auto multi-level repeating, suit for ultra-long-range communication, allows multi-network on the same region
- Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications
- Customizable communication key which won’t be retrieved greatly improves the security of user data
- LBT support, monitoring the signal channel noise before transmitting, greatly improves the success ratio under an extreme environment
- RSSI signal intensity indicating support, for evaluating signal quality, tuning the network
- Wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter
- Supports fixed-point transmission, broadcast, signal channel monitor
Package Includes:
1 x SX1268 433M LoRa HAT
1 x USB type A plug to micro plug cable
1 x 433MHz antenna
About Sx1268 Lora Hat
Waveshare SX1268 LoRa HAT for Raspberry Pi 433MHz Frequency Band is available at Zbotic, India’s trusted electronics and robotics store. Manufactured by WAVESHARE, this product is designed for hobbyists, students, and professionals working on electronics, robotics, and DIY projects.
Product Details
- Brand: WAVESHARE
- SKU: AI1579
- Category: Raspberry Pi Hats
Why Buy from Zbotic?
Zbotic offers a wide range of electronics components, development boards, sensors, and robotics parts. All products are quality-checked and shipped within 24 hours. Free shipping on qualifying orders. We offer COD (Cash on Delivery) and secure online payment options. Our customer support team is available to help with technical queries about Sx1268 Lora Hat and other products.
Applications
Sx1268 Lora Hat can be used in a variety of projects including Arduino projects, Raspberry Pi builds, drone assembly, 3D printing, IoT applications, and educational experiments. Whether you are a beginner or an advanced user, this component provides the reliability and performance you need. Order your Sx1268 Lora Hat today and start building.
About Sx1268 Lora Hat
Waveshare SX1268 LoRa HAT for Raspberry Pi 433MHz Frequency Band is available at Zbotic, India’s trusted electronics and robotics store. Manufactured by WAVESHARE, this product is designed for hobbyists, students, and professionals working on electronics, robotics, and DIY projects.
Product Details
- Brand: WAVESHARE
- SKU: AI1579
- Category: PCT and DC Power Connectors
Why Buy from Zbotic?
Zbotic offers a wide range of electronics components, development boards, sensors, and robotics parts. All products are quality-checked and shipped within 24 hours. Free shipping on qualifying orders. We offer COD (Cash on Delivery) and secure online payment options. Our customer support team is available to help with technical queries about Sx1268 Lora Hat and other products.
Applications
Sx1268 Lora Hat can be used in a variety of projects including Arduino projects, Raspberry Pi builds, drone assembly, 3D printing, IoT applications, and educational experiments. Whether you are a beginner or an advanced user, this component provides the reliability and performance you need. Order your Sx1268 Lora Hat today and start building.
Waveshare SX1268 LoRa HAT for Raspberry Pi 433MHz Frequency Overview
The Waveshare SX1268 LoRa HAT for Raspberry Pi is a 433 MHz expansion board that enables long-range, low-power wireless communication via the SPI/UART interface. Designed to plug directly onto a Raspberry Pi GPIO header, it leverages the SX1268 LoRa spread-spectrum chipset for reliable data transmission up to 5 km in open areas.
Key Features of Waveshare SX1268 LoRa HAT for Raspberry Pi 433MHz Frequency
- Built around the Semtech SX1268 chip with 410.125–493.125 MHz frequency coverage
- On-board 74HC125V voltage level translator for 3.3 V/5 V compatibility
- CP2102 USB-to-UART converter for direct serial communication and easy PC debugging
- High receive sensitivity of –147 dBm @ 0.3 kbps and selectable data rates up to 62.5 kbps
- Integrated features: auto-repeat, Wake-on-Radio, carrier sensing, wireless configuration and communication key
- Achieves up to 5 km range in open line-of-sight with a 5 dBi antenna (air speed 2.4 kbps, height 2.5 m)
- Order today from Zbotic for genuine product with fast shipping across India
Applications and Use Cases
- Building a Raspberry Pi-based LoRaWAN gateway for remote sensor nodes
- Long-range environmental and agricultural monitoring (soil moisture, weather stations)
- Point-to-point telemetry and data logging in rural or remote areas
- Smart metering and utility tracking over 433 MHz band
- Wireless alarm or security systems requiring extended coverage
- Educational and prototyping projects in IoT and wireless communication
How to Use Waveshare SX1268 LoRa HAT for Raspberry Pi 433MHz Frequency
Mount the LoRa HAT onto the Raspberry Pi’s 40-pin GPIO header, install the CP2102 USB-UART driver on your PC or Pi, then connect via serial. Use a compatible LoRa library to configure the SX1268 registers for 433 MHz operation, set your desired data rate and transmit power, and begin sending or receiving data through the UART interface.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Which Raspberry Pi models support the SX1268 LoRa HAT?
The HAT is compatible with any Raspberry Pi featuring a 40-pin GPIO header, including Pi 2, Pi 3, Pi 4, and Zero 2 W models. Ensure the board sits firmly on the pins for reliable operation.
How do I set the operating frequency to 433 MHz?
In your LoRa library code, configure the SX1268 frequency registers (e.g., RegFrMsb, RegFrMid, RegFrLsb) to the 433 MHz parameters. Waveshare’s sample scripts and register table guide you through precise frequency settings.
What communication range can I expect?
Under clear line-of-sight conditions with an AUX 5 dBi antenna at 2.5 m height and 2.4 kbps air rate, the SX1268 HAT can achieve up to 5 km range. Urban or obstructed environments will reduce effective distance.
Raspberry Pi UART Serial Communication with Sensors
UART (Universal Asynchronous Receiver-Transmitter) is one of the oldest and most reliable communication protocols in electronics. Despite being...
Read More →
Raspberry Pi Weather Station: BME680 and E-Ink Display Build
Building a personal weather station is one of the most satisfying Raspberry Pi projects you can undertake. With...
Read More →
Raspberry Pi Headless Setup: Configure Without Monitor
The most common frustration for new Raspberry Pi users is this: "I don't have an HDMI monitor or...
Read More →Technical Specifications
| Brand | WAVESHARE |
|---|---|
| Model | SX1268 |
| Interface / Protocol | LoRa |
| Frequency | 433MHz |
| Package Quantity | 1268 pcs |
| SKU | AI1579 |
| Weight | 0.117 kg |
| Availability | In Stock |
Applications & Use Cases
The Waveshare SX1268 LoRa HAT for Raspberry Pi 433MHz Frequency Band is a versatile raspberry pi hats used across a wide range of applications including electronics projects, DIY builds, prototyping, and educational experiments.
Common use cases:
- Integrating into a custom electronics project
- Learning and experimenting with circuits
- Replacing or upgrading components in existing setups
This product is ideal for electronics enthusiasts, engineers, and students.
Technical Tip: Always verify voltage and current requirements before connecting to your circuit. Check datasheets for detailed specifications and pin configurations.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine WAVESHARE product sourced from authorized channels
Shivam Kumar (verified owner) –
Good quality Waveshare SX1268 LoRa HAT for Raspberry. Shipping was fast. Minor scuff on the box but product is fine.
Ankit Jain (verified owner) –
Outstanding! This Waveshare SX1268 LoRa HAT for Raspberry powers my home automation hub. Zbotic delivers genuine products.
Akshat Hegde (verified owner) –
This Waveshare SX1268 LoRa HAT for Raspberry is perfect for my IoT gateway project. Handles everything smoothly.
Neeraj Banerjee (verified owner) –
Perfect Waveshare SX1268 LoRa HAT for Raspberry for my machine learning project. Great performance for the size.
Karan Naidu (verified owner) –
Superb quality Waveshare SX1268 LoRa HAT for Raspberry. Genuine product, fast delivery. Using it for a media center.
Sunil Luthra (verified owner) –
Amazing Waveshare SX1268 LoRa HAT for Raspberry. Set up Retro Pi and it works like a charm. Great purchase!
Varun Dhillon (verified owner) –
Good Waveshare SX1268 LoRa HAT for Raspberry. Runs well but gets warm under load. Added a fan and it’s perfect now.
Sanjay Pillai (verified owner) –
Amazing Waveshare SX1268 LoRa HAT for Raspberry. Set up Retro Pi and it works like a charm. Great purchase!
Piyush Ghosh (verified owner) –
Fantastic Waveshare SX1268 LoRa HAT for Raspberry. My smart mirror project is running beautifully on this.
Akash Tandon (verified owner) –
Good quality Waveshare SX1268 LoRa HAT for Raspberry. Shipping was fast. Minor scuff on the box but product is fine.