DRV8833 2 Channel DC Motor Driver
DRV8833 is a dual H-bridge motor driver IC that can be used for bidirectional control of two brushed DC motors at 2.7 V to 10.8 V. It can supply up to about 1.2 A per channel continuously and can tolerate peak currents up to 2 A per channel for a few seconds, making it an ideal driver for small motors that run on relatively low voltages. The board ships populated with SMD components, including the DRV8833, and adds an FET for reverse battery protection.
The DRV8833 has a higher peak current rating (2 A per channel vs 1.5 A), optional built-in current-limiting, and no need for externally supplied logic voltage.
Features:
- Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor.
- Operating voltage: 2.7 V to 10.8 V
- Output current: 1.2 A continuous (2 A peak) per motor.
- Motor outputs can be paralleled to deliver 2.4 A continuous (4 A peak) to a single motor.
- Inputs are 3V- and 5V-compatible.
- Under-voltage lockout and protection against over-current and over-temperature
- Reverse-voltage protection circuit.
- Current limiting can be enabled by adding sense resistors (not included)
Specifications:
| Model Series: | DRV Series |
|---|---|
| Voltage Rating (V): | 2.7 to 10.8VDC |
| Current Rating (A): | 1.2 to 2 |
| Width (mm): | 18 |
| Height (mm): | 8 |
| Weight (g): | 5 |
Package Includes:
1 x DRV8833 2 Channel DC Motor Driver Module
12 x Pin Headers
DC Gear Motor Buying Guide: RPM, Torque & Voltage
A gear motor is a DC motor paired with a gearbox that reduces the output shaft speed while...
Read More →
Raspberry Pi Motor Control with L298N: Python Code Guide
Table of Contents Why L298N with Raspberry Pi? Hardware Requirements Wiring Diagram: Pi to L298N to Motor GPIO...
Read More →
TT Gear Motor for Robot Car: Voltage, RPM & Tire Matching
The humble TT gear motor is the backbone of hobbyist robot cars in India. Walk into any electronics...
Read More →Technical Specifications
| Model | DRV8833 |
|---|---|
| Channels | 2-channel |
| SKU | AI0965 |
| Weight | 0.0 kg |
| Availability | Out of Stock |
Applications & Use Cases
The DRV8833 2 Channel DC Motor Driver is a versatile stepper motor drivers used across a wide range of applications including CNC machines, 3D printers, robotics, camera sliders, and pick-and-place machines.
Common use cases:
- Driving NEMA 17 stepper motors in a 3D printer
- Building a CNC router
- Precise positioning in a robotic arm
This product is ideal for CNC builders, 3D printer makers, and robotics engineers.
Technical Tip: TMC2208/2209 drivers offer silent operation via StealthChop. A4988/DRV8825 are more affordable. Set current limit via the onboard potentiometer.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Chetan Malhotra (verified owner) –
Perfect DRV8833 2 Channel DC Motor Driver for my automation project. Speed control works beautifully.
Yogesh Kapoor –
Great DRV8833 2 Channel DC Motor Driver. Mounting holes are accurate and the shaft fits perfectly with my coupling.
Sachin Thakur (verified owner) –
This DRV8833 2 Channel DC Motor Driver is ideal for precision applications. Very happy with the purchase.
Isha Parekh –
Good quality DRV8833 2 Channel DC Motor Driver. Minor vibration at high speed but acceptable for my project.
Dhruv Deshpande (verified owner) –
Pretty good DRV8833 2 Channel DC Motor Driver. Using it in my conveyor project. Performs reliably.
Paras Malhotra (verified owner) –
Very satisfied with this DRV8833 2 Channel DC Motor Driver. My robotic arm moves precisely with this motor.
Sahil Dhillon (verified owner) –
Pretty good DRV8833 2 Channel DC Motor Driver. Using it in my conveyor project. Performs reliably.
Aisha Luthra (verified owner) –
Good quality DRV8833 2 Channel DC Motor Driver. Minor vibration at high speed but acceptable for my project.
Sumit Saini (verified owner) –
This DRV8833 2 Channel DC Motor Driver runs very smoothly. Using it in my CNC project, very reliable.
Deepika Modi (verified owner) –
Nice DRV8833 2 Channel DC Motor Driver. Torque is decent. Mounting was easy. Good value for money.
Sandeep Dave –
Love this DRV8833 2 Channel DC Motor Driver. Silent operation and consistent speed. Worth every rupee.
Riya Thakur (verified owner) –
Perfect DRV8833 2 Channel DC Motor Driver for my automation project. Speed control works beautifully.
Krishna Choudhury (verified owner) –
Good DRV8833 2 Channel DC Motor Driver. Runs well but generates a bit of heat under full load.
Eshan Chatterjee (verified owner) –
Superb DRV8833 2 Channel DC Motor Driver! Torque is exactly as specified. My project runs perfectly with this.
Deepak Panchal (verified owner) –
Pretty good DRV8833 2 Channel DC Motor Driver. Using it in my conveyor project. Performs reliably.
Akshat Mukherjee (verified owner) –
Superb DRV8833 2 Channel DC Motor Driver! Torque is exactly as specified. My project runs perfectly with this.
Priya Modi (verified owner) –
Superb DRV8833 2 Channel DC Motor Driver! Torque is exactly as specified. My project runs perfectly with this.
Nischay Sai (verified owner) –
Tejas Chopra (verified owner) –
Outstanding quality DRV8833 2 Channel DC Motor Driver. Been running for weeks continuously without any issues.
Aisha Mehta (verified owner) –
Good DRV8833 2 Channel DC Motor Driver. Runs well but generates a bit of heat under full load.
Kritika Vyas (verified owner) –
Outstanding quality DRV8833 2 Channel DC Motor Driver. Been running for weeks continuously without any issues.
Deepika Shah (verified owner) –
Love this DRV8833 2 Channel DC Motor Driver. Silent operation and consistent speed. Worth every rupee.
Ashish Kapoor (verified owner) –
This DRV8833 2 Channel DC Motor Driver is ideal for precision applications. Very happy with the purchase.