MPX5010DP Pressure Sensor 0-10KPa Transmitter Sensor module is a dual port, an integrated silicon pressure sensor in 6 pin SIP package. This piezoresistive transducer is state of the art monolithic silicon pressure sensor; designed for a wide range of applications.
It is ideally suited for a microprocessor; and microcontroller-based system. This transducer combines advanced micromachining techniques; thin-film metallization, and bipolar processing to provide an accurate; high-level analog output signal that is proportional to applied pressure. The axial port has been modified to accommodate industrial grade tubing.
Features
On-chip signal conditioned, temperature compensated and calibrated.
Differential configuration.
5.0% maximum error over 0°C to 85°C.
Durable epoxy unibody.
Temperature compensated over -40°C to 125°C.
Patented silicon shear stress-strain gauge.
Pressure range from 0KPa to 10KPa.
Supply voltage range from 4.75VDC to 5.25VDC.
The sensitivity of 450mV/kPa.
Response time of 1ms.
Mounting hole diameter: M4 x 11 (height).
Specification:
Model
MPX5010DP
Input Voltage ( Volt)
4.75 – 5.25
Operating Pressure Range (KPa)
0 – 10
Sensitivity (mV/KPa)
450
Pressure Type
Differential
Operating Temperature Range (°C)
-40 ~ +125
Sensor Case Style
SIP
No. of Pins
6
Output Type
Analog Voltage
Output Voltage (Volt)
0.2 ~ 4.7
Port Size
Male – 0.19″ (4.93mm) Tube, Dual
Dimensions (mm)
38 x 30 x 11
Weight (gm)
6
Package Includes
1 x MPX5010DP Pressure Sensor 0-10KPa Transmitter Sensor.
The Mpx5010dp Module is designed for electronics enthusiasts, engineers, and hobbyists working on IoT systems, environmental monitoring, automation, and data acquisition projects. As a Level and Pressure Sensor product, it provides the performance and reliability needed for both prototyping and production-level projects. Whether you are building your first circuit or designing a complex system, the Mpx5010dp Module delivers consistent results that you can depend on.
Key Features of Mpx5010dp Module
Quality Assured: Every unit is tested before shipping to ensure reliability
Wide Compatibility: Compatible with Arduino, ESP32, Raspberry Pi, STM32, and other development boards
Easy Integration: Well-documented with community support and code examples available online
Fast Shipping: Ships within 24 hours with tracking from Zbotic warehouse
Applications and Use Cases for Mpx5010dp Module
The Mpx5010dp Module is versatile and can be used in numerous applications across different industries and project types:
These are just some of the most common applications. The Mpx5010dp Module can be adapted for many other uses depending on your specific project requirements. Browse our full range of Level and Pressure Sensor products to find complementary components for your build.
How to Use Mpx5010dp Module
Connect the sensor to your microcontroller using the recommended wiring diagram. Most sensors use either analog output (connect to ADC pin) or digital protocols like I2C or SPI. Power the sensor with the appropriate voltage (check specifications). Read sensor data using the corresponding library in Arduino IDE or your preferred development environment. Calibrate the sensor if required for accurate measurements. For I2C sensors, connect SDA and SCL lines with pull-up resistors. For analog sensors, use appropriate voltage dividers if the output exceeds your ADC reference voltage.
For detailed wiring diagrams, code examples, and tutorials for the Mpx5010dp Module, check the product documentation or search for community-created guides online. Our support team at Zbotic is also available to help with technical questions.
Why Buy Mpx5010dp Module from Zbotic?
Zbotic is India’s trusted online store for electronics components, development boards, sensors, motors, and robotics parts. When you buy the Mpx5010dp Module from Zbotic, you get:
Genuine Products: All items are sourced from authorized distributors and quality-checked
Fast Shipping: Orders ship within 24 hours with real-time tracking
Free Shipping: Free delivery on orders above Rs.999 across India
COD Available: Pay via Cash on Delivery, UPI, cards, or net banking
Technical Support: Expert assistance for wiring, coding, and troubleshooting
Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions about Mpx5010dp Module
Where can I buy Mpx5010dp Module in India?
You can buy Mpx5010dp Module online at Zbotic.in with fast shipping across India. We offer genuine products with COD and multiple online payment options.
What is the price of Mpx5010dp Module?
The Mpx5010dp Module is available at Rs.1,433 at Zbotic. Prices may vary based on availability and offers.
What voltage does this sensor require?
Check the specifications section above for the exact operating voltage. Most sensors work with 3.3V or 5V DC power supply.
How do I connect this sensor to Arduino?
Connect VCC to 5V (or 3.3V as specified), GND to GND, and the signal/data pin to an appropriate digital or analog pin on the Arduino. Refer to the wiring diagram in the product documentation.
Is this sensor compatible with Raspberry Pi?
Yes, most sensors are compatible with Raspberry Pi. For 5V sensors, you may need a logic level converter since Raspberry Pi GPIO pins operate at 3.3V.
Getting Started with Mpx5010dp Module
Setting up the Mpx5010dp Module for your project is straightforward. Begin by reviewing the specifications listed above to ensure compatibility with your existing setup. For prototyping, a breadboard-based approach is recommended before committing to a permanent PCB design.
When integrating the Mpx5010dp Module into your project, consider the power requirements carefully. Always verify the operating voltage matches your power supply output. Use decoupling capacitors near power pins for stable operation, especially in noise-sensitive applications. For digital interfaces, ensure signal levels match between the Mpx5010dp Module and your microcontroller.
Tips for Best Results
Read the datasheet thoroughly before wiring — incorrect connections can damage the component permanently
Start with example code from verified sources before writing custom firmware
Use proper ESD protection when handling sensitive electronics
Test with a multimeter before applying full power to verify connections
Keep a clean, well-organized workspace for reliable results
Document your wiring and code for future reference and troubleshooting
Community and Support
The Mpx5010dp Module is supported by a large community of makers, engineers, and hobbyists worldwide. You can find tutorials, project ideas, and troubleshooting guides on popular platforms like Arduino Forum, Instructables, Hackster.io, and YouTube. For product-specific questions, Zbotic’s technical support team is available to assist you with setup, wiring, and programming queries. Join the growing community of electronics enthusiasts who trust Zbotic for quality components and reliable service across India.
The MPX5010DP Pressure Sensor 0-10KPa Transmitter Sensor Module is a versatile level and pressure sensor used across a wide range of applications including water quality monitoring, hydroponics, aquariums, industrial water treatment, and smart irrigation.
Common use cases:
Measuring TDS in a hydroponic nutrient solution
Monitoring pH in an aquarium
Tracking water flow in an irrigation system
This product is ideal for aquaculture professionals, hydroponic growers, and environmental engineers.
Technical Tip: Calibrate pH and TDS sensors regularly with standard solutions. Keep probe tips clean and submerged when not in use.
Shipping & Delivery
Free shipping on orders above ₹999 across India
Dispatched within 1-3 business days
Expected delivery: 3-7 business days depending on location
Secure packaging to ensure safe transit of electronic components
Weight
0.01 kg
Dimensions
5 × 4 × 2 cm
15 Days Warranty
Please note that this item is only covered by a standard supplier warranty against manufacturing defects for a period of 15days from the time of delivery. It is important to understand that only manufacturing defects are covered under this warranty, and any other issues will not be considered for reimbursement or replacement. We strongly advise inspecting the product upon delivery to ensure it meets your expectations. In case of any manufacturing defects, we guarantee reimbursement or replacement.
What voids warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
Aditya Bhatt (verified owner) –
Bought this MPX5010DP Pressure Sensor 0-10KPa Transmitter Sensor for my college project. Accurate readings, easy to code. Very happy!
Ananya Rajan –
Good quality MPX5010DP Pressure Sensor 0-10KPa Transmitter Sensor. Some variation in readings but within acceptable range.
Pallavi Dave (verified owner) –
Nice MPX5010DP Pressure Sensor 0-10KPa Transmitter Sensor. Readings are mostly accurate. Good enough for my hobby project.
Advik Naidu (verified owner) –
This MPX5010DP Pressure Sensor 0-10KPa Transmitter Sensor is a must-have for sensor projects. Plug and play with Arduino.
Anirudh Dubey (verified owner) –
Outstanding accuracy from this MPX5010DP Pressure Sensor 0-10KPa Transmitter Sensor. Compared with a professional instrument, readings match closely.
Jai Shah (verified owner) –
This MPX5010DP Pressure Sensor 0-10KPa Transmitter Sensor works great with Arduino. Easy to wire up and code.
Sarika Dave (verified owner) –
Love this MPX5010DP Pressure Sensor 0-10KPa Transmitter Sensor. Response time is fast and readings are stable.
Aditi Hegde (verified owner) –
This MPX5010DP Pressure Sensor 0-10KPa Transmitter Sensor works great with Arduino. Easy to wire up and code.
Pooja Panchal (verified owner) –
Good quality MPX5010DP Pressure Sensor 0-10KPa Transmitter Sensor. Some variation in readings but within acceptable range.
Vipin Ghosh (verified owner) –
Excellent sensitivity and range on this MPX5010DP Pressure Sensor 0-10KPa Transmitter Sensor. Works better than I expected.
Raj Iyer (verified owner) –
Okay MPX5010DP Pressure Sensor 0-10KPa Transmitter Sensor. Had to add a capacitor to stabilize readings. Works now.