Looking for Mdd10a Motor? Cytron MDD10A Dual Channel Enhanced 10Amp DC Motor Driver 30A Peak is available at Zbotic with fast shipping across India.
Cytron MDD10A Dual Channel Enhanced 10Amp DC Motor Driver 30A Peak
This Cytron Dual Channel Enhanced 10Amp DC Motor Driver 30A Peak MDD10A is the dual-channel version which is designed to drive 2 brushed DC motor with high current up to 13A continuously. Like MD10C, MDD10A also supports locked-antiphase and sign-magnitude PWM signal.
It is using full solid-state components that result in faster response time and eliminate the wear and tear of the mechanical relay.
Note:
1. MDD10A shipped in Rev2.0 which Vmotor supports up to 30VDC.
2. Please use the battery when driving an inductive load such as DC brush motor. Due to the protection circuit of the most Power supply (switching), it will shut down when regenerative current from the motor is detected.
Features:
- Bi-directional control of 2 brushed DC motor.
- Support motor voltage ranges from 5V to 25V.
- Maximum current up to 10A continuous and 30A peak (10 seconds) for each channel.
- Solid-state components provide faster response time and eliminate the wear and tear of the mechanical relay.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
- Speed control PWM frequency up to 20KHz. Support both locked-antiphase and sign-magnitude PWM operation.
- 2 activation buttons for fast test on each channel.
Specificatioms:
| Item Type: | Motor Driver |
|---|---|
| Model Series: | MDD Series |
| Voltage Rating (V): | 5 to 25 |
| Current Rating (A): | 10 to 30 |
| Driver Model | MDD10A |
| Operating Voltage (VDC): | 5 ~ 25 |
| Peak Current (A) | 30 |
| Continuous Current (A) | 10 |
| Arduino Shield (Y/N) | can be used with Wire connection, No |
| Operating Modes | PWM (Lock-Antiphase and Sign-Magnitude): Yes, UART: No, Analog:No, RC Servo Signal: No |
| No. of Channels | 2 |
| Cooling Fan (Y/N) | No |
| LED Indicator (Y/N) | Yes |
| Polarity Protection (Y/N) | NO |
| Dimensions (LxWxH) mm | 85 x 62 x 25 |
| Weight (g): | 40 |
Package Includes:
1 x Cytron MDD10A Dual Channel Enhanced 10Amp DC Motor Driver 30A Peak
Cytron MDD10A Dual Channel Enhanced 10Amp DC Motor Driver Overview
The Cytron MDD10A is a dual-channel DC motor driver designed to control two brushed motors with bidirectional speed and direction adjustment. Each channel delivers up to 10A continuous current and 30A peak (10 seconds), while supporting motor voltages from 5V to 25V (up to 30V on Rev2.0). Its fully solid-state NMOS H-Bridge design ensures fast switching response without mechanical wear or external heatsinks.
Key Features of Cytron MDD10A Dual Channel Enhanced 10Amp DC Motor Driver
- Dual-channel driver with 10A continuous and 30A peak current per channel
- Wide motor voltage range: 5V–25V (Rev2.0 supports up to 30VDC)
- Fully NMOS H-Bridge design for high efficiency and no heatsink required
- Supports both locked-antiphase and sign-magnitude PWM control modes
- All solid-state components for faster response and zero relay wear-and-tear
- Genuine Cytron product, fast shipping across India from Zbotic
Applications and Use Cases
- Differential drive control in mobile robots and rovers
- Speed and direction control in conveyor belts and small machinery
- RC cars, boats or crawling robots requiring high peak torque
- Automated gates, door openers, or linear actuator projects
- Educational and hobbyist electronics labs
How to Use Cytron MDD10A Dual Channel Enhanced 10Amp DC Motor Driver
Connect your battery or DC supply (5–25V) to the Vmotor terminal and tie the logic supply (VM) to 5V. Attach each motor to its corresponding output terminals and common ground. Drive IN1/IN2 (and PWM pins) with your microcontroller or PWM generator, selecting locked-antiphase or sign-magnitude mode as needed. Ensure decoupling capacitors on the motor supply and use a battery source for inductive loads to protect the driver.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
What PWM signal modes are supported by the MDD10A?
The MDD10A accepts both locked-antiphase mode (single PWM pin per channel) and sign-magnitude mode (separate direction and PWM pins), allowing you to choose the control style that best fits your microcontroller or motor-controller board.
Can I sustain 30A peak current continuously?
No. The 30A rating is a peak specification limited to 10 seconds per channel. For safe operation and to avoid thermal shutdown, keep each channel’s continuous current at or below 10A.
Do I need a heatsink or external cooling with this driver?
No heatsink is required under normal loads up to 10A continuous. The fully NMOS H-Bridge design offers efficient switching and low heat generation, though adequate airflow is always recommended in enclosed spaces.
DC Motor Torque vs Speed: Understanding the Characteristics Curve
If you have ever burned out a DC motor or wondered why your robot slows to a crawl...
Read More →
Motor Heat Sink: When and How to Add Cooling to Motor Drivers
One of the most common causes of failed motor driver boards is heat. The A4988 overheats and cuts...
Read More →
High Power Stepper Motor Driver: TB6600 Wiring & Setup Guide
The TB6600 stepper motor driver is one of the most popular high-current stepper drivers available for hobbyists, makers,...
Read More →Technical Specifications
| Model | MDD10A |
|---|---|
| Current Rating | 30A |
| SKU | AI1102 |
| Weight | 0.003 kg |
| Availability | Out of Stock |
Applications & Use Cases
The Cytron MDD10A Dual Channel Enhanced 10Amp DC Motor Driver 30A Peak is a versatile brushed / brushless dc motor driver used across a wide range of applications including robot motor control, DC motor speed regulation, H-bridge circuits, electric vehicle drives, and conveyor belt control.
Common use cases:
- Bidirectional motor control for a robot
- PWM speed control of a DC motor
- Building a motorized platform
This product is ideal for robotics engineers and motor control enthusiasts.
Technical Tip: L298N is a classic dual H-bridge driver. For higher efficiency, consider MOSFET-based drivers like BTS7960.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Tarun Luthra –
This Cytron MDD10A Dual Channel Enhanced 10Amp is ideal for precision applications. Very happy with the purchase.
Anushka Saini (verified owner) –
This Cytron MDD10A Dual Channel Enhanced 10Amp exceeded expectations. RPM is as advertised, very smooth operation.
Naman Bajaj (verified owner) –
Okay Cytron MDD10A Dual Channel Enhanced 10Amp. Noisy at higher speeds but functional for basic applications.
Ishan Trivedi (verified owner) –
This Cytron MDD10A Dual Channel Enhanced 10Amp runs very smoothly. Using it in my CNC project, very reliable.
Pallavi Khurana (verified owner) –
Superb Cytron MDD10A Dual Channel Enhanced 10Amp! Torque is exactly as specified. My project runs perfectly with this.
Prashant Dubey (verified owner) –
This Cytron MDD10A Dual Channel Enhanced 10Amp is ideal for precision applications. Very happy with the purchase.
Rakesh Parekh (verified owner) –
Good quality Cytron MDD10A Dual Channel Enhanced 10Amp. Minor vibration at high speed but acceptable for my project.
Rajesh Verma –
Great quality Cytron MDD10A Dual Channel Enhanced 10Amp. Shaft is precise and bearings are solid. No vibration at all.
Gaurav Gill (verified owner) –
Very satisfied with this Cytron MDD10A Dual Channel Enhanced 10Amp. My robotic arm moves precisely with this motor.
Aarav Joshi (verified owner) –
Excellent Cytron MDD10A Dual Channel Enhanced 10Amp! Smooth rotation and good torque. Perfect for my robot.
Tanmay Patel (verified owner) –
This Cytron MDD10A Dual Channel Enhanced 10Amp exceeded expectations. RPM is as advertised, very smooth operation.
Hitesh Singh (verified owner) –
Pretty good Cytron MDD10A Dual Channel Enhanced 10Amp. Using it in my conveyor project. Performs reliably.
Lokesh Srivastava (verified owner) –
Outstanding quality Cytron MDD10A Dual Channel Enhanced 10Amp. Been running for weeks continuously without any issues.
Sameer Jain (verified owner) –
Great Cytron MDD10A Dual Channel Enhanced 10Amp. Mounting holes are accurate and the shaft fits perfectly with my coupling.
Rashmi Gupta (verified owner) –
Great quality Cytron MDD10A Dual Channel Enhanced 10Amp. Shaft is precise and bearings are solid. No vibration at all.
Dhruv Dhillon (verified owner) –
Great Cytron MDD10A Dual Channel Enhanced 10Amp. Mounting holes are accurate and the shaft fits perfectly with my coupling.
Lakshmi Patel (verified owner) –
This Cytron MDD10A Dual Channel Enhanced 10Amp runs very smoothly. Using it in my CNC project, very reliable.
Sunil Khanna (verified owner) –
Perfect Cytron MDD10A Dual Channel Enhanced 10Amp for my automation project. Speed control works beautifully.
Siddharth Krishnan (verified owner) –
This Cytron MDD10A Dual Channel Enhanced 10Amp runs very smoothly. Using it in my CNC project, very reliable.
Kartik Jain (verified owner) –
Excellent Cytron MDD10A Dual Channel Enhanced 10Amp! Smooth rotation and good torque. Perfect for my robot.
Bhavna Rajan –
Bought 4 of these for my robot. All working identically. Excellent consistency.
Nikita Hegde (verified owner) –
Nice Cytron MDD10A Dual Channel Enhanced 10Amp. Torque is decent. Mounting was easy. Good value for money.