This is the 12V variant of the N20 12V 120RPM Micro Metal Gear Motor With Encoder in N20 Motor with Encoder. Available at ₹528.64 (₹448.00 + GST) with free shipping across India.
Looking for N20 Motor 12v? N20 12V 120RPM Micro Metal Gear Motor With Encoder is available at Zbotic with fast shipping across India.
Product Description
These N20 12V 120RPM Micro Metal Gear Motor With Encoder is intended for use at 12 V. Though in general, these kinds of motors can run at voltages above and below this nominal voltage; so they should comfortably operate in the 3 – 12 V range (rotation can start at voltages as low as 0.5 V).
Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. The micro metal gear motors are available in a wide range of gear ratios—from 5:1 up to 1000:1. With the exception of 1000:1 gear ratio versions, all of the micro metal gear motors have the same physical dimensions; so one version can be easily swapped for another if your design requirements change.
Features :
- Model: GA12 N20.
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
- Motor Size: 15 x 12 x 10 mm.
- Gearbox Length: 9 mm.
- Count: 3PPR(Pulse per Revolutions).
How to wiring? :
- Red – motor Power (Exchange can control the motor positive and negative rotation).
- Black – encoded power supply(VCC) – Positive (positive 3.3-5v).
- Yellow – signal feedback (motor turns 2 signals).
- Green – signal feedback (motor turns 2 signals).
- Blue – encoded power(GND).
- White – Motor power (Exchange can control the motor positive and negative rotation).
Dimensions :
Package Includes :
1 x N20 12V 120RPM Micro Metal Gear Motor With Encoder.
1 x Connector(14 cm).
N20 12V 120RPM Micro Metal Gear Motor With Encoder Overview
The N20 12V 120RPM Micro Metal Gear Motor With Encoder is a compact, precision gear motor designed to deliver reliable torque and feedback at a nominal 12V supply. Equipped with an integrated encoder and a D-shaped output shaft, it’s ideal for robotics, automated vehicles, and small-scale motion control projects requiring accurate speed and position monitoring.
Key Features of N20 12V 120RPM Micro Metal Gear Motor With Encoder
- Rated Voltage: DC 12V (operates smoothly in the 3–12V range)
- Output Speed: 120 RPM for consistent, controlled motion
- Integrated Encoder: Two-channel incremental feedback with 140 mm test wire length
- D-Type Output Shaft: 3 × 10 mm shaft compatible with standard couplers and wheels
- Wheel Diameter: 43 mm white plastic wheel included for easy mounting
- Precision Milling Edge: 0.5 mm gear machining for low noise and durability
- Fast Shipping from Zbotic: Shipped within 24 hours across India
Applications and Use Cases
- Miniature differential drive robots requiring real-time speed feedback
- Line-following and maze-solving educational robots
- Automated conveyor systems for light payloads
- Custom remote-controlled vehicles and smart toys
- DIY CNC engraving tables and pen plotters
- Embedded mechatronics projects demanding compact size
How to Use N20 12V 120RPM Micro Metal Gear Motor With Encoder
Mount the motor securely using bracket clamps or glue to your chassis, then slide the 43 mm wheel onto the D-type shaft. Connect the red and black leads to a DC motor driver (ensuring 12 V supply) and wire the encoder’s four leads (A, B, Vcc, GND) to your microcontroller’s digital inputs. Adjust PWM duty cycle for speed control and read encoder pulses for closed-loop feedback.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
What voltage range can I safely use with this motor?
The motor is rated for 12 V but will start rotating at voltages as low as 0.5 V and run reliably between 3 V and 12 V. Operating above 12 V may reduce lifespan.
Does this product include the wheel and encoder wiring?
Yes, each unit comes with a 43 mm plastic wheel pre-mounted on the D-shaft and 140 mm of encoder test wiring for both A and B channels.
How do I interpret the encoder signals?
The encoder provides two square-wave outputs (channels A and B). By counting pulses you can track rotations, and by monitoring the phase difference between A and B you determine direction.
Automatic Solar Tracker Using Servo Motor and LDR Sensors
A fixed solar panel captures only a fraction of the sunlight it could if it were always pointed...
Read More →
Worm Gear Motor Applications: Self-Locking Mechanism Guide
The worm gear motor's self-locking property is one of the most underappreciated features in the robotics and automation...
Read More →
Build a Pan-Tilt Camera Mount with Servo Motors & Arduino
Table of Contents Project Overview Parts List Understanding the Pan-Tilt Mechanism Wiring the Servos to Arduino Basic Joystick...
Read More →Technical Specifications
| Model | N20 |
|---|---|
| Operating Voltage | 12V |
| Speed | 120 RPM |
| SKU | AI2458 |
| Weight | 0.0195 kg |
| Availability | Out of Stock |
Applications & Use Cases
The N20 12V 120RPM Micro Metal Gear Motor With Encoder is a versatile n20 motor with encoder used across a wide range of applications including electronics projects, DIY builds, prototyping, and educational experiments.
Common use cases:
- Integrating into a custom electronics project
- Learning and experimenting with circuits
- Replacing or upgrading components in existing setups
This product is ideal for electronics enthusiasts, engineers, and students.
Technical Tip: Always verify voltage and current requirements before connecting to your circuit. Check datasheets for detailed specifications and pin configurations.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
