This is the Green variant of the Green A4988 driver Stepper Motor Driver- Normal Quality in Stepper Motor Drivers. Available at ₹77.88 (₹66.00 + GST) with free shipping across India.
Green A4988 driver Stepper Motor Driver- Normal Quality
The Green A4988 driver Stepper Motor Driver- Normal Quality is a complete micro-stepping motor driver with a built-in converter, easy to operate. It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling).
A4988 driver Stepper Motor Driver includes a fixed off-time current regulator, the regulator can be in slow or mixed decay mode. The converter is the key to the easy implementation of the A4988.
There are no phase sequence tables, high-frequency control interface programming, etc. The application of the A4988 interface is very suitable for a complex microprocessor that is not available or overloaded. In the stepping operation, the chopping control in the A4988 automatically selects the current decay mode (slow or mixed). The mix decay current control scheme can reduce the audible motor noise, increase step accuracy, and reduce power consumption.
Provide internal synchronous rectification control circuitry, in order to improve the pulse width modulation (PWM) power consumption during operation.
Internal circuit protection includes thermal shutdown with hysteresis, under-voltage lockout (UVLO) and crossover current protection. Don’t need special power-up sequencing. A4988 uses a surface mount QFN package (ES), the size is 5 mm × 5 mm, nominal overall package height is 0.90 mm, with an exposed thermal pad to enhance the heat dissipation function.
Attention! The connection and disconnection of the motor, while the driver is turned on, can damage the system.
Note: The difference between product “A4988 driver Stepper Motor Driver- Standard Quality” and “A4988 driver Stepper Motor Driver- Good Quality” is, The good quality A4988 has more number of PCB layers and it features the connecting pins which are of gold plated as compared to other.
Features :
- Automatic current decay mode detection/choice.
- Mixed with slow current decay mode.
- The low power dissipation of synchronous rectifier.
- Internal UVLO(ultra voltage lockout).
- Crossover current protection.
- Thermal shutdown circuit.
- Ground fault protection.
- Loading and short circuit protection.
- The optional five-step mode: full, 1/2, 1/4, 1/8 and 1/16.
Specifications:
| Model Series: | A4988 Series |
|---|---|
| Voltage Rating (V): | 8 to 35VDC |
| Current Rating (A): | 1 to 2 |
| Input Voltage (VDC) | 8 ~ 35 |
| Logic Voltage (V) | 3 ~ 5.5 |
| Current (A) w/o Heatsink | 1A |
| Current (A) with Heatsink | 2A |
| Color: | Dark Green |
Package Includes :
1 x Green A4988 driver Stepper Motor Driver- Standard Quality
1 x Heat sink.
Green A4988 driver Stepper Motor Driver- Normal Quality Overview
The Green A4988 driver is a complete micro-stepping driver designed to control bipolar stepper motors in a compact package. It handles motor voltages from 8 V to 35 V and delivers up to 1 A per phase without heatsinking (2 A per coil with adequate cooling), making it ideal for precise motion control.
Key Features of Green A4988 driver Stepper Motor Driver- Normal Quality
- Wide supply voltage range: 8 V–35 V DC for flexible power options
- Adjustable current limiting: 1 A per phase (no heatsink) and up to 2 A per coil with heat-sinking
- TTL logic compatibility: 3 V–5.5 V inputs for STEP, DIR, ENABLE and decay mode pins
- Built-in fixed off-time current regulator with automatic slow/mixed decay mode selection
- On-board voltage regulator simplifies integration of motor and logic supplies
- Genuine product guaranteed by Zbotic with fast shipping across India
Applications and Use Cases
- 3D printer axis and extruder drive for smooth, accurate layer shifts
- CNC router and milling machine axis control
- Robotic arm joint positioning in DIY and industrial robots
- Automated camera sliders and pan-tilt systems for time-lapse photography
- Educational kits and STEM projects requiring precise stepper control
- Prototype pick-and-place and labeling machines
How to Use Green A4988 driver Stepper Motor Driver- Normal Quality
Mount the A4988 module on your control board or breadboard, wire VMOT to an 8–35 V motor supply, connect GND to common ground, and VDD to a 3.3–5 V logic supply. Attach stepper motor coils to the A1/A2 and B1/B2 outputs. Use MS1–MS3 pins to select microstepping resolution (full to 1/16), and adjust the on-board potentiometer to set the current limit. Drive STEP and DIR inputs from a microcontroller or driver board, and add a heatsink or fan if running near 2 A per coil.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
What voltage and current ranges does this A4988 driver support?
The module accepts 8 V to 35 V on the motor supply (VMOT) and is rated for 1 A per phase without a heatsink. With proper heat-sinking and airflow, it can handle up to 2 A per coil. Logic inputs (STEP, DIR, MS1–MS3) operate at 3 V–5.5 V.
How do I select microstepping modes on the A4988?
Use the MS1, MS2, and MS3 pins to configure step resolution: leave all low for full step, enable MS1 for half step, MS1+MS2 for quarter, MS1+MS3 for eighth, and all three for sixteenth-step operation. Tie unused pins to GND or VDD as needed.
What is the purpose of the decay mode feature?
The built-in fixed off-time current regulator automatically switches between slow and mixed decay modes to maintain smooth current control and reduce motor resonance, improving motion precision without complex external circuitry.
How to Use Stepper Motor with Arduino: NEMA 17 + A4988 Guide
The NEMA 17 stepper motor paired with an A4988 driver is one of the most popular combinations for...
Read More →
DC Motor Torque vs Speed: Understanding the Characteristics Curve
If you have ever burned out a DC motor or wondered why your robot slows to a crawl...
Read More →
Motor Driver PWM Frequency: Impact on Performance & Efficiency
Table of ContentsIntroductionPWM Basics for Motor ControlHow PWM Frequency Affects Motor BehaviourAudible Noise and the 20 kHz RuleDriver...
Read More →Technical Specifications
| Model | A4988 |
|---|---|
| Color | Green |
| SKU | AI5941 |
| Weight | 0.0 kg |
| Availability | In Stock |
Applications & Use Cases
The Green A4988 driver Stepper Motor Driver- Normal Quality is a versatile stepper motor drivers used across a wide range of applications including CNC machines, 3D printers, robotics, camera sliders, and pick-and-place machines.
Common use cases:
- Driving NEMA 17 stepper motors in a 3D printer
- Building a CNC router
- Precise positioning in a robotic arm
This product is ideal for CNC builders, 3D printer makers, and robotics engineers.
Technical Tip: TMC2208/2209 drivers offer silent operation via StealthChop. A4988/DRV8825 are more affordable. Set current limit via the onboard potentiometer.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Paras Gill (verified owner) –
This Green A4988 driver Stepper Motor Driver- runs very smoothly. Using it in my CNC project, very reliable.
Lalit Dhillon (verified owner) –
Superb Green A4988 driver Stepper Motor Driver-! Torque is exactly as specified. My project runs perfectly with this.
Vijay Iyer (verified owner) –
Very satisfied with this Green A4988 driver Stepper Motor Driver-. My robotic arm moves precisely with this motor.
Girish Chopra (verified owner) –
Outstanding quality Green A4988 driver Stepper Motor Driver-. Been running for weeks continuously without any issues.
Jatin Bisht (verified owner) –
Great quality Green A4988 driver Stepper Motor Driver-. Shaft is precise and bearings are solid. No vibration at all.
Aisha Patil –
Love this Green A4988 driver Stepper Motor Driver-. Silent operation and consistent speed. Worth every rupee.
Sameer Bhandari (verified owner) –
Great Green A4988 driver Stepper Motor Driver-. Mounting holes are accurate and the shaft fits perfectly with my coupling.
Meera Das (verified owner) –
Perfect Green A4988 driver Stepper Motor Driver- for my automation project. Speed control works beautifully.
Vansh Menon (verified owner) –
This Green A4988 driver Stepper Motor Driver- is ideal for precision applications. Very happy with the purchase.
Sumit Garg (verified owner) –
Decent Green A4988 driver Stepper Motor Driver-. Works as expected. Shaft length is adequate for most applications.
Yash Bose (verified owner) –
Great Green A4988 driver Stepper Motor Driver-. Mounting holes are accurate and the shaft fits perfectly with my coupling.
Mayank Gupta (verified owner) –
Excellent Green A4988 driver Stepper Motor Driver-! Smooth rotation and good torque. Perfect for my robot.
Ashish Mishra –
Bought 4 of these for my robot. All working identically. Excellent consistency.
Daksh Gupta –
Great quality Green A4988 driver Stepper Motor Driver-. Shaft is precise and bearings are solid. No vibration at all.
Kapil Menon (verified owner) –
Good Green A4988 driver Stepper Motor Driver-. Runs well but generates a bit of heat under full load.
Abhishek Saini (verified owner) –
Pretty good Green A4988 driver Stepper Motor Driver-. Using it in my conveyor project. Performs reliably.
Sameer Solanki (verified owner) –
Bought 4 of these for my robot. All working identically. Excellent consistency.
Shreyas Sethi (verified owner) –
Nice Green A4988 driver Stepper Motor Driver-. Torque is decent. Mounting was easy. Good value for money.
Gaurav Rao (verified owner) –
Pretty good Green A4988 driver Stepper Motor Driver-. Using it in my conveyor project. Performs reliably.
Pankaj Dhawan (verified owner) –
Good Green A4988 driver Stepper Motor Driver-. Runs well but generates a bit of heat under full load.
Shreyas Hegde (verified owner) –
Superb Green A4988 driver Stepper Motor Driver-! Torque is exactly as specified. My project runs perfectly with this.
Shreyas Tandon (verified owner) –
Outstanding quality Green A4988 driver Stepper Motor Driver-. Been running for weeks continuously without any issues.