SKYRC E3 AC 2S~3S Li-Po Battery Balance Charger (V2)
This product is an original SKYRC E3 AC 2S / 3S Li-Po Battery Charger (V2). It can work with any power supply from 100 to 240 volts, making it suitable for any country in the world. The charger does not have any buttons, so you just need to wait until the green lights turn on, indicating that the battery is fully charged. Charging an 11.1V 2200mah Li-Po Battery Pack takes about two to three hours with this charger.
Charge Status LED:
| LED Indicator | Charger Status |
| LED stays green and flashes red | The charger is ready to charge |
| LED glows constant red | The charger is charging |
| LED glows constant green | The charging process finishes |
Error Message:
| All LEDs flashes red once and stop 1 second in cycle | The battery connects incorrectly |
| All LEDs flashes red twice and stop 1 second in cycle | The charger encounters overload or short circuit |
| All LEDs flashes red four times and stop 1 second in cycle | The voltage of a single cell is too high or too low |
| All LEDs flashes red six times and stop 1 second in cycle | There is a 300mv difference of voltage between a battery pack |
Specifications and Features :
- Version 2.0.
- Input: AC 100V-240V AC.
- Dimension approx: 88 X 57 X 35mm.
- Cell count range: 1-3 cells.
- Max Charge Current: 1.2 A.
- Operational mode display: via 3 Leeds.
specification-
| Input Voltage (V AC) | 100 ~ 240 |
|---|---|
| Output Power(Watt) | 11W ± 10% |
| Charge Current Range (A) | 0.1 ~ 1.2 |
| Li-ion/Po cell count | 2 ~ 3 |
| Dimensions (mm) LxWxH | 88 x 57 x 35 |
| Weight (gm) | 103 |
| Shipping Weight | 0.15 kg |
| Shipping Dimensions | 9 × 6 × 4 cm |
Package Includes:
1 x SKYRC E3 AC 2S / 3S Li-Po Battery Charger (V2) (Original).
1 x AC Power Cord (Indian Plug)
LiPo Battery Guide: Voltage, C-Rating & Safety
A LiPo battery (Lithium Polymer) is the power source of choice for drones, RC aircraft, FPV racers, and...
Read More →
Hand Crank Generator: Emergency USB Power Source
Table of ContentsDC Motor as Generator Gear Ratio Design Voltage Regulation Circuit USB Output Integration Mechanical Design Considerations...
Read More →
Battery Discharge Curve: Understanding Voltage Profiles
The battery discharge curve is a graph of cell voltage versus capacity (mAh) or time during discharge at...
Read More →Technical Specifications
| Brand | SKYRC |
|---|---|
| Cell Configuration | 2S |
| SKU | AI5195 |
| Weight | 0.27 kg |
| Availability | Out of Stock |
Applications & Use Cases
The Original SKYRC E3 AC 2S~3S Li-Po Battery Balance Charger (V2) is a versatile ni-mh & li-po & li-ion battery chargers used across a wide range of applications including electronics projects, DIY builds, prototyping, and educational experiments.
Common use cases:
- Integrating into a custom electronics project
- Learning and experimenting with circuits
- Replacing or upgrading components in existing setups
This product is ideal for electronics enthusiasts, engineers, and students.
Technical Tip: Always verify voltage and current requirements before connecting to your circuit. Check datasheets for detailed specifications and pin configurations.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine SKYRC product sourced from authorized channels
Akshat Agarwal –
Okay Original SKYRC E3 AC 2S~3S Li-Po. Output is slightly off from specified but within usable range.
Vipin Kapoor –
Great quality Original SKYRC E3 AC 2S~3S Li-Po. Powering my entire project board with this. Very reliable.
Sakshi Naidu (verified owner) –
Outstanding! This Original SKYRC E3 AC 2S~3S Li-Po supplies clean power to my sensitive circuits. No noise at all.
Chitra Mittal –
This Original SKYRC E3 AC 2S~3S Li-Po is exactly what I needed. Output current capacity is as advertised.
Sameer Kapoor (verified owner) –
This Original SKYRC E3 AC 2S~3S Li-Po is reliable and efficient. Running my IoT setup 24/7 with no issues.
Gauri Bhat –
Nice Original SKYRC E3 AC 2S~3S Li-Po. Works as expected for my power needs. Good efficiency.
Lalit Banerjee (verified owner) –
Excellent Original SKYRC E3 AC 2S~3S Li-Po! Output is stable and reliable. Perfect for my electronics project.
Chitra Yadav –
This Original SKYRC E3 AC 2S~3S Li-Po is exactly what I needed. Output current capacity is as advertised.
Vishal Mehta –
This Original SKYRC E3 AC 2S~3S Li-Po is reliable and efficient. Running my IoT setup 24/7 with no issues.
Rajesh Vohra –
This Original SKYRC E3 AC 2S~3S Li-Po is reliable and efficient. Running my IoT setup 24/7 with no issues.
Bharat Dhillon (verified owner) –
Good Original SKYRC E3 AC 2S~3S Li-Po. Output is stable. Gets slightly warm under full load but nothing concerning.
Ravi Rathore –
Outstanding! This Original SKYRC E3 AC 2S~3S Li-Po supplies clean power to my sensitive circuits. No noise at all.
Kiara Rathore (verified owner) –
Nice Original SKYRC E3 AC 2S~3S Li-Po. Works as expected for my power needs. Good efficiency.
Krishna Patel –
Perfect Original SKYRC E3 AC 2S~3S Li-Po for my portable project. Battery life is better than expected.
Kabir Vohra (verified owner) –
Excellent Original SKYRC E3 AC 2S~3S Li-Po! Output is stable and reliable. Perfect for my electronics project.
Lalit Bisht –
Good quality Original SKYRC E3 AC 2S~3S Li-Po. Ripple is low. Suitable for most electronics projects.
Sneha Singh (verified owner) –
Nice Original SKYRC E3 AC 2S~3S Li-Po. Works as expected for my power needs. Good efficiency.
Sachin Modi (verified owner) –
Outstanding! This Original SKYRC E3 AC 2S~3S Li-Po supplies clean power to my sensitive circuits. No noise at all.
Prashant Reddy (verified owner) –
Good quality Original SKYRC E3 AC 2S~3S Li-Po. Ripple is low. Suitable for most electronics projects.