YZC-133 Weighing Load Cell Sensor 20kg For Electronic Weighing Scale
The YZC-133 Weighing Load Cell Sensor 20kg For Electronic Weighing Scale is a device that can convert up to 20 kg of force into an electrical signal. It works by measuring the change in electrical resistance that occurs when a strain (e.g. pressure or force) is applied to the metal bar.
This sensor can be used to measure the weight of an object, detect changes in weight over time, or sense the presence of an object by measuring the strain or load on a surface. The sensor is made of aluminum alloy and has a maximum capacity of 1KG.
The sensor has four lead wires that can be connected to the HX711 A/D Pressure Sensor. It operates with a driving voltage of 5-10V and produces an output voltage that varies according to the force applied to it.
To install the sensor, one end should be fixed with a screw and the other end should be left free. The direction of the gravitational force should match the label on the sensor. The white plastic cover on the sensor should not be pushed directly to avoid damage.
An electronic weighing machine uses a load cell to measure the load or pressure generated by the weight. Most load cells use the strain gauge method, which converts the force into an electrical signal. The load cells have four strain gauges arranged in a Wheatstone bridge circuit.
Dimensions:
- Mounting hole diameter (mm): 2 holes – M3.3 x 13(depth) and 2 holes – M4 x 13mm(depth).
- Weight: 32 gm.
Wheatstone bridge formation of Load Cell:
HX711 (24-bit Analog to Digital Converter)
HX 711 is a precision 24-bit analog to digital converter (ADC) specially designed for Weigh scales and industrial control applications to interface directly with a bridge sensor.
Simply connect Load cell wires to the HX711 module based on their color, then connect DAT (Data) pin to Arduino Analog pin A1 and connect CLK (Clock) pin to Arduin0 Analog pin A0, Put Vcc and GND supply from Arduino power source pins.
Specification:
| Weighing Range (Kg) | 20 |
|---|---|
| Rated Output | 1.0 ± 0.1mV / V |
| Non Linear Output | ± 0.03% F.S |
| Hysteresis | 0.03% F.S |
| Repeatability | 0.05% F.S |
| Creep | 0.03%F.S./30min |
| Cable Length (cm) | 18 |
| Zero Balance | ± 0.1 mV / V |
| Protection Standard | IP65 |
| Insulation Resistance (MΩ) | 2000 |
| Impedance (Ω) | 1115±10% Ω |
| Output Impedance | 1000 ± 10% Ω |
| Operating Temperature (°C): | -20 to 65 |
| Weight (g): | 29 |
| Shipping Weight | 0.08 kg |
| Shipping Dimensions | 8 × 3 × 1 cm |
Package Includes:
ICM-42688 6-Axis IMU: Low Noise Precision for Drones
When it comes to building high-performance drones and UAVs, the inertial measurement unit (IMU) is arguably the most...
Read More →
EEG Brain Sensor Module: NeuroSky MindWave Arduino Guide
Reading your own brainwaves with an Arduino — what once seemed like science fiction is now a weekend...
Read More →
Fingerprint Sensor R307 vs AS608: Complete Biometric Module Buyer Guide for Arduino
Biometric fingerprint sensors have become affordable and accessible enough for hobbyists in India to integrate into door locks,...
Read More →Technical Specifications
| Model | YZC-133 |
|---|---|
| SKU | AI2683 |
| Weight | 0.04 kg |
| Availability | Out of Stock |
Applications & Use Cases
The YZC-133 Weighing Load Cell Sensor 20kg For Electronic Weighing Scale is a versatile load / pressure / force / flex sensor used across a wide range of applications including electronics projects, DIY builds, prototyping, and educational experiments.
Common use cases:
- Integrating into a custom electronics project
- Learning and experimenting with circuits
- Replacing or upgrading components in existing setups
This product is ideal for electronics enthusiasts, engineers, and students.
Technical Tip: Always verify voltage and current requirements before connecting to your circuit. Check datasheets for detailed specifications and pin configurations.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
