Looking for Cc3d Controller? OpenPilot CC3D EVO Flight Controller Straight Pin is available at Zbotic with fast shipping across India.
OpenPilot CC3D EVO Flight Controller Straight Pin
The OpenPilot CC3D EVO Flight Controller with Straight Pin boasts a seamless feature that allows direct compatibility with satellite receivers, eliminating the need for extra cables. It also supports S.BUS. The Evo is powered by a robust 32-bit STM32 processor, featuring 128kb Flash and 20kb RAM. It utilizes 3-axis MEMs technology for both the gyro and accelerometer.
Using the OpenPilot CC3D EVO Flight Controller with Straight Pin is straightforward with any computer. It can be programmed using USB and OpenPilot software on Windows, Mac, or Linux systems, with no drivers required for installation. OpenPilot software is exceptionally user-friendly, designed for use by individuals of all programming backgrounds.
The OpenPilot CC3D EVO Flight Controller with Straight Pin and the OpenPilot CC3D EVO Flight Controller with Side Pin boards are technically identical. The sole distinction lies in the type of connector pins used: one has straight pins, while the other features 90º side pins.
Note: Please don’t flash/Update the Default firmware. Updated or new firmware may cause a problem of connectivity with PC/Laptop. This OpenPilot CC3D EVO Flight Controller is available in black & white colored PCBs, you may get any of them randomly.
Features :
CC3D EVO Hardware Features :
- WIth a function of being directly plugged into the satellite receiver(It needn’t conversion cable)
- Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.
- 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
- Tiny 36 x 36 mm 4 layer PCB for superior electrical noise reduction and flight performance.
- Software support for Windows, Mac, and Linux.
- Direct high-speed USB support with no drivers required, a true plug and play device.
- Spektrum satellite receiver support.
- Futaba S-BUS hardware support.
- Innovative Flexi-port technology for superior port flexibility.
- 4Mbits onboard EEPROM for configuration storage.
Flexiport :
- Copter Control also offers the innovative Flexiport which provides either I2C connectivity or a second serial port. Flexiport gives Copter Control the flexibility to use either I2C and a single serial port or dual serial port, according to your connectivity needs.
Superior user experience :
- OpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally, for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with bootloader already flashed.
- A standard mini USB cable (not includes) is used to load the latest firmware and configure everything for your unique airframe. The OpenPilot project, whilst still young, it trying to make Open Source much more user-friendly.
- OpenPilot software is designed to be used by everybody! All major operating systems are supported and install packages are provided.
- The software is all Free software under the GPLv3 license and not only are you welcome to hack it, but we encourage it.
Sensors and Components :
- 3-axis Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2,
- Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers.
- Simultaneous support for multiple receivers.
- ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels
- MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites
- FlexiPort (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development)
- 10 PWM outputs to servos or ESC’s, or for camera stabilization
- Camera stabilization supports up to 3axis camera mounts with stabilization and manual control from any of configured receivers.
- Onboard USB connectivity for easy configuration.
- USB and serial telemetry and configuration
- Supported by powerful OpenPilot GCS
- 4 Mbit onboard memory
- 3C Quaternion based complementary filter running at 500Hz
Package Includes :
1 x OpenPilot CC3D EVO Flight Controller Straight Pin
2 x Connecting Wires.
1 x PC plastic shell
OpenPilot CC3D EVO Flight Controller Straight Pin Overview
The OpenPilot CC3D EVO Flight Controller Straight Pin is a compact 36×36 mm, four-layer PCB designed for precise stabilization and control of multirotor and fixed-wing UAVs. Equipped with a high-performance 32-bit STM32 processor alongside 3-axis MEMs gyro and accelerometer, it delivers plug-and-play USB setup and seamless satellite receiver integration without extra cables.
Key Features of OpenPilot CC3D EVO Flight Controller Straight Pin
- 32-bit STM32 processor with 128 KB Flash and 20 KB RAM for responsive flight control
- 3-axis high-performance MEMs gyros and 3-axis MEMs accelerometer for accurate attitude sensing
- Direct high-speed USB plug-and-play support—no drivers required on Windows, Mac, or Linux
- Spektrum satellite receiver and Futaba S-BUS hardware support via innovative Flexi-port technology
- 4 Mbits onboard EEPROM for secure storage of settings and flight logs
- Genuine OpenPilot hardware available at Zbotic with fast shipping across India
Applications and Use Cases
- DIY racing quadcopters requiring low-latency stabilization
- Aerial photography platforms where precise attitude control is critical
- Fixed-wing UAV prototypes needing compact flight electronics
- FPV rigs leveraging Spektrum satellite or S-BUS receivers for telemetry
- Research and development drones using onboard EEPROM for custom firmware tests
How to Use OpenPilot CC3D EVO Flight Controller Straight Pin
Mount the CC3D EVO onto your airframe using vibration-damping hardware, solder motor and receiver leads to the straight-pin headers, then connect directly to your computer via USB. Launch the OpenPilot Ground Control Station on Windows, Mac, or Linux to calibrate sensors, configure port assignments for Spektrum or S-BUS, and upload firmware—all without installing extra drivers.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Does the CC3D EVO require drivers for USB setup?
No. The CC3D EVO Flight Controller Straight Pin offers true plug-and-play via its high-speed USB interface, so you can connect to Windows, Mac, or Linux without installing additional drivers.
How do I connect a Spektrum satellite receiver?
Use the Flexi-port on the CC3D EVO to attach your Spektrum satellite directly with a compatible cable. In the OpenPilot GCS, assign the Flexi-port to “PPM/SPEKTRUM” and calibrate receiver settings before flight.
Can I update firmware on this board?
Yes. OpenPilot’s Ground Control Station allows you to upload the latest CC3D EVO firmware through USB. Simply select the board in the firmware tab and follow on-screen instructions to complete the update.
Drone Motor KV Rating Calculator and Selection Guide
Understanding the drone motor KV rating and how to calculate the right motor for your build is fundamental...
Read More →
Drone Payload Systems: How to Add a Camera Gimbal
Drone Payload Systems: How to Add a Camera Gimbal to Your Drone A camera gimbal transforms your drone...
Read More →
Long Range Cruiser Drone: 7-Inch Build for Exploration
Table of Contents Understanding Long Range Cruiser Drone Key Components and Requirements Step-by-Step Setup Guide Configuration and Optimisation...
Read More →Technical Specifications
| Model | CC3D |
|---|---|
| SKU | AI1218 |
| Weight | 0.025 kg |
| Availability | Out of Stock |
Applications & Use Cases
The OpenPilot CC3D EVO Flight Controller Straight Pin is a versatile flight controller & accessories used across a wide range of applications including autonomous drones, FPV racing quadcopters, agricultural drones, and surveying and mapping platforms.
Common use cases:
- Central brain for drone stabilization and navigation
- GPS waypoint missions for surveying
- Acro mode flying for FPV freestyle
This product is ideal for drone builders requiring precise flight control.
Technical Tip: F4 processors are good for basic builds; F7 or H7 recommended for advanced features. Ensure firmware compatibility (Betaflight, ArduPilot, iNAV).
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Manoj Patel (verified owner) –
Superb OpenPilot CC3D EVO Flight Controller Straight! Built my first drone with this and it performed beyond expectations.
Farhan Negi (verified owner) –
Decent OpenPilot CC3D EVO Flight Controller Straight for the price. Using it in my quadcopter, performs well overall.
Vivek Nair (verified owner) –
Good quality OpenPilot CC3D EVO Flight Controller Straight. Minor scratches on arrival but functionally perfect.
Anjali Dave (verified owner) –
Excellent OpenPilot CC3D EVO Flight Controller Straight! Perfect for my quadcopter build. Arrived well packed and works flawlessly.
Bhavna Pillai (verified owner) –
This OpenPilot CC3D EVO Flight Controller Straight is exactly what I needed for my drone. Works perfectly, very reliable.
Chitra Grewal (verified owner) –
Decent OpenPilot CC3D EVO Flight Controller Straight for the price. Using it in my quadcopter, performs well overall.
Lalit Naidu (verified owner) –
Excellent product for the price. My drone flies smoothly with this OpenPilot CC3D EVO Flight Controller Straight. Highly recommended!
Ankit Singh (verified owner) –
Received the OpenPilot CC3D EVO Flight Controller Straight in great condition. Testing done, everything works perfectly.
Zara Jain –
Good product overall. My drone is flying well with this OpenPilot CC3D EVO Flight Controller Straight. Satisfied with the purchase.
Aditi Srivastava (verified owner) –
Bought this for my college drone project. Works great, professor was impressed!