This is ESP WROOM 32 MCU Development Module. ESP WROOM 32 is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding. The WROOM32 based modules with integrated flash. These modules are well suited for Wi-Fi and Bluetooth/Bluetooth LE-based connectivity applications and provide a solid dual-core performance and the clock frequency is adjustable from 80 MHz to 240 MHz.
The user may also use power saving mode for the CPU and make use of the low-power coprocessor to constantly monitor the peripherals for changes or crossing of thresholds. ESP32S integrates a rich set of peripherals, ranging from capacitive touch sensors, Hall sensors, low-noise sense amplifiers, SD card interface, Ethernet, high-speed SDIO/SPI, UART, and I²C.
Using Bluetooth, users can connect to their phone or broadcast low energy beacons for its detection. The use of Wi-Fi enables a large physical range, as well as a direct connection to the internet via a Wi-Fi router. Perfect for wearable electronic or battery-powered applications, the ESP32 chip uses less than 5µA.
In addition, this module can support data rates of up to 150 Mbps and 22 dBm output power at the PA in order to allow for the widest physical range.
The ESP WROOM 32 MCU Development Module- 38 pin is a versatile other esp wifi modules used across a wide range of applications including WiFi connectivity for microcontrollers, IoT sensor nodes, remote monitoring, OTA firmware updates, and cloud-connected devices.
Common use cases:
Adding WiFi to an existing Arduino project
Building a cloud-connected weather station
Enabling remote firmware updates
This product is ideal for IoT developers and electronics hobbyists.
Technical Tip: ESP-WROOM-32 modules need proper decoupling capacitors and antenna clearance for reliable WiFi performance.
Shipping & Delivery
Free shipping on orders above ₹999 across India
Dispatched within 1-3 business days
Expected delivery: 3-7 business days depending on location
Secure packaging to ensure safe transit of electronic components
Weight
0.01 kg
Dimensions
3.5 × 7 × 2 cm
15 Days Warranty
Please note that this item is only covered by a standard supplier warranty against manufacturing defects for a period of 15days from the time of delivery. It is important to understand that only manufacturing defects are covered under this warranty, and any other issues will not be considered for reimbursement or replacement. We strongly advise inspecting the product upon delivery to ensure it meets your expectations. In case of any manufacturing defects, we guarantee reimbursement or replacement.
What voids warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
Nikhil Gill (verified owner) –
Perfect for my IoT project. This ESP WROOM 32 MCU Development Module- has excellent WiFi performance.
Anjali Goyal (verified owner) –
Decent ESP WROOM 32 MCU Development Module-. Had to install CP2102 drivers but works fine after that.
Suraj (verified owner) –
Nice service
Ashutosh Dhariwal (verified owner) –
Fantastic packaging. I’ll surely order again. Reasonable prices.
Prateek Pillai –
Okay ESP WROOM 32 MCU Development Module-. Took time to figure out the pin mapping but functional.
Neha Sharma (verified owner) –
Nice ESP WROOM 32 MCU Development Module- for IoT prototyping. Breadboard compatible which is a plus.
Naveen Singh –
Superb ESP WROOM 32 MCU Development Module-! Using it for my weather monitoring station. WiFi range is impressive.
Advik Kulkarni (verified owner) –
Superb ESP WROOM 32 MCU Development Module-! Using it for my weather monitoring station. WiFi range is impressive.
Sakshi Dubey (verified owner) –
Excellent ESP WROOM 32 MCU Development Module-! WiFi connectivity is strong and stable. Perfect for IoT projects.
Girish Kumar (verified owner) –
This ESP WROOM 32 MCU Development Module- is amazing for home automation. Connected all my smart devices easily.
Sandeep Bodkhe (verified owner) –
Ishan Vohra (verified owner) –
Nice ESP WROOM 32 MCU Development Module- for IoT prototyping. Breadboard compatible which is a plus.
Girish Bajaj (verified owner) –
Perfect for my IoT project. This ESP WROOM 32 MCU Development Module- has excellent WiFi performance.
Rohit Choudhury (verified owner) –
Love this ESP WROOM 32 MCU Development Module-. Built a smart switch with it. Works with Home Assistant perfectly.
Kavya Krishnan –
Decent ESP WROOM 32 MCU Development Module-. Had to install CP2102 drivers but works fine after that.
Zara Khanna (verified owner) –
Perfect for my IoT project. This ESP WROOM 32 MCU Development Module- has excellent WiFi performance.
Arjun Reddy (verified owner) –
This ESP WROOM 32 MCU Development Module- is a beast for the price. Running a web server on it with no issues.
Rishabh Agarwal (verified owner) –
Love this ESP WROOM 32 MCU Development Module-. Built a smart switch with it. Works with Home Assistant perfectly.
Raj Thakur (verified owner) –
Excellent ESP WROOM 32 MCU Development Module-! WiFi connectivity is strong and stable. Perfect for IoT projects.
Harsh Negi (verified owner) –
Good ESP WROOM 32 MCU Development Module-. WiFi works well. Sometimes needs a reset but overall solid.
Hemant Mishra (verified owner) –
Love this ESP WROOM 32 MCU Development Module-. Built a smart switch with it. Works with Home Assistant perfectly.
Anjali Singh (verified owner) –
Excellent ESP WROOM 32 MCU Development Module-! WiFi connectivity is strong and stable. Perfect for IoT projects.
Anand Shetty (verified owner) –
Good quality ESP WROOM 32 MCU Development Module-. Flash memory is sufficient for most projects.
Rishabh Trivedi (verified owner) –
This ESP WROOM 32 MCU Development Module- is a beast for the price. Running a web server on it with no issues.
Chetan Mukherjee (verified owner) –
Nice ESP WROOM 32 MCU Development Module- for IoT prototyping. Breadboard compatible which is a plus.