Looking for Hx710b Module? HX710B Air Pressure Sensor Module Water Level Sensor Module 0-40Kpa is available at Zbotic with fast shipping across India.
Description:
If you want to build a device that detects the pressure of the atmosphere, then this Sensor is needed for you. From this sensor, you can easily identify the pressure of wind at the time of the cyclone.
HX710B Atmospheric Pressure Sensor Module – This barometric pressure sensor is optimized for altimeters and variometers with an altitude resolution of 10 cm. The sensor module includes a high linearity pressure sensor and an ultra-low power 24-bit ADC with internal factory calibrated coefficients. It provides a precise digital 24-bit pressure and temperature value and different operation modes that allow the user to optimize for conversion speed and current consumption.
This HX710B air pressure sensor module uses a high-precision AD sampling chip, adopts a 0-40KPa air pressure sensor, can connect a 2.5mm hose, and can detect water level and other air pressure.
Connection Diagram of HX710B With Arduino:
Features:
- Two Selectable Differential Input Channels
- On-Chip Active Low Noise PGA
- Selectable Gain of 32, 64, and 128
- On-Chip Power Supply Regulator for Load Cell and ADC Analog Power Supply
- On-Chip Power-ON-Reset
- Simple Digital Control and Serial Interface
Specifications:
| Interface Type | Serial |
|---|---|
| Data Output Rate | 10 SPS / 80SPS |
| Max. Operating Current (mA) | 1.5 |
| Operating Temperature (°C) | -40 to 85 |
| IC Package | 16 Pin SOP |
| Gain | 32 / 64 / 128 |
| Length (mm): | 18 |
| Width (mm): | 17 |
| Height (mm): | 2 |
Package Includes:
- 1 x HX710B AIR PRESSURE (0-40KPA) SENSOR MODULE
- 1 x 4 Pin Male Straight Header
- 1 x 4 Pin Male Right Angle Header
Attachments:
Tutorial:
https://swharden.com/blog/2022-11-14-hx710b-arduino/
HX710B Air Pressure Sensor Module Water Level Sensor Module Overview
The HX710B Air Pressure Sensor Module Water Level Sensor Module is a compact barometric pressure transducer with an integrated 24-bit ADC, designed to measure pressures from 0 kPa to 40 kPa. It delivers precise digital readings for both atmospheric pressure and hydrostatic pressure, making it ideal for altimeters, variometers and water level monitoring applications.
Key Features of HX710B Air Pressure Sensor Module Water Level Sensor Module
- Model HX710B chip: High-linearity pressure sensor with built-in 24-bit ADC
- Pressure range of 0–40 kPa for air and water level detection
- Selectable data output rate: 10 SPS or 80 SPS via onboard jumper
- Ultra-low power consumption with max. operating current of 1.5 mA
- Compact 16-pin SOP package for space-constrained designs
- Genuine product, fast shipping across India from Zbotic
Applications and Use Cases
- Barometric altimeters and variometers in drones, UAVs and model rockets
- Weather stations monitoring wind pressure during storms or cyclones
- Water tank and reservoir level measurement via hydrostatic pressure
- Environmental data loggers tracking atmospheric pressure trends
- DIY home automation for flood detection and leak alarms
How to Use HX710B Air Pressure Sensor Module Water Level Sensor Module
Power the HX710B module with 3.3 V–5 V and connect GND to your controller. Wire the Data (DOUT) and Clock (SCLK) pins to two digital I/O lines, then set the output rate to 10 SPS or 80 SPS using the onboard jumper. Use the provided factory-calibrated digital values to compute pressure or water depth in your firmware—no external reference resistors or complex calibration steps required.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
What pressure range can the HX710B module measure?
The HX710B sensor covers 0 kPa to 40 kPa, suitable for low-pressure atmospheric readings and hydrostatic measurements for water level sensing.
How do I interface the HX710B with a microcontroller?
Connect VCC (3.3 V–5 V) and GND, then wire DOUT and SCLK to two GPIO pins. Read 24-bit digital output at 10 SPS or 80 SPS directly in your code and convert counts to pressure or depth using the sensor’s formulas.
Can I use this sensor for water level monitoring?
Yes. By submerging the sensor diaphragm, the module measures hydrostatic pressure, which you can translate into water depth for tank or reservoir level applications.
Best IMU Sensors for Robotics & Drones in India (2026)
Choosing the right IMU (Inertial Measurement Unit) sensor can make or break your robotics or drone project. With...
Read More →
Hall Effect Sensor Guide: Working, Types & Arduino Projects
The Hall effect sensor is one of the most versatile and underappreciated components in electronics. Named after Edwin...
Read More →
Piezoelectric Vibration Sensor: Knock Detection with Arduino
Table of Contents Introduction to Piezoelectric Vibration Sensing The Piezoelectric Effect Explained Piezo Sensor Modules vs Bare Elements...
Read More →Technical Specifications
| Model | HX710B |
|---|---|
| Package Quantity | 710 pcs |
| SKU | AI0565 |
| Weight | 0.00325 kg |
| Availability | Out of Stock |
Applications & Use Cases
The HX710B Air Pressure Sensor Module Water Level Sensor Module 0-40Kpa is a versatile load / pressure / force / flex sensor used across a wide range of applications including electronics projects, DIY builds, prototyping, and educational experiments.
Common use cases:
- Integrating into a custom electronics project
- Learning and experimenting with circuits
- Replacing or upgrading components in existing setups
This product is ideal for electronics enthusiasts, engineers, and students.
Technical Tip: Always verify voltage and current requirements before connecting to your circuit. Check datasheets for detailed specifications and pin configurations.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Nikita Singh (verified owner) –
Excellent sensitivity and range on this HX710B Air Pressure Sensor Module Water. Works better than I expected.
Naveen Tiwari (verified owner) –
Excellent sensitivity and range on this HX710B Air Pressure Sensor Module Water. Works better than I expected.
Lalit Khanna (verified owner) –
This HX710B Air Pressure Sensor Module Water is a must-have for sensor projects. Plug and play with Arduino.
Pallavi Sethi (verified owner) –
Good quality HX710B Air Pressure Sensor Module Water. Some variation in readings but within acceptable range.
Nikhil Vyas –
Good HX710B Air Pressure Sensor Module Water. Works as described. Calibration needed some patience but results are good.
Rahul Rao (verified owner) –
Nice HX710B Air Pressure Sensor Module Water. Readings are mostly accurate. Good enough for my hobby project.
Dinesh Kohli (verified owner) –
This HX710B Air Pressure Sensor Module Water is a must-have for sensor projects. Plug and play with Arduino.
Tanmay Trivedi (verified owner) –
Good HX710B Air Pressure Sensor Module Water. Works as described. Calibration needed some patience but results are good.
Sumit Goyal –
Love this HX710B Air Pressure Sensor Module Water. Response time is fast and readings are stable.
JITENDER KUMAR (verified owner) –
Paras Parekh (verified owner) –
Perfect for my weather station. This HX710B Air Pressure Sensor Module Water gives consistent readings day and night.
Ishan Grewal –
Outstanding accuracy from this HX710B Air Pressure Sensor Module Water. Compared with a professional instrument, readings match closely.
Naresh Narain Gaur (verified owner) –
Hardik Arora (verified owner) –
This HX710B Air Pressure Sensor Module Water works great with Arduino. Easy to wire up and code.
Tejas Chopra (verified owner) –
Love this HX710B Air Pressure Sensor Module Water. Response time is fast and readings are stable.
Sahil Joshi –
This HX710B Air Pressure Sensor Module Water is a must-have for sensor projects. Plug and play with Arduino.
Lokesh Deshpande (verified owner) –
Outstanding accuracy from this HX710B Air Pressure Sensor Module Water. Compared with a professional instrument, readings match closely.