Looking for M8n Module Neo-m8n? NEO-M8N GPS Module with Ceramic Active Antenna is available at Zbotic with fast shipping across India.
M8n Module Neo-m8n – Description:
The APM2.5 NEO-M8N GPS Module GYGPSV1-8M is optimized for cost-sensitive applications, while NEO-M8N/M8Q provides the best performance and easier RF integration. The NEO-M8N offers high performance also at low power consumption levels. The futureproof NEO-M8N includes an internal Flash that allows future firmware updates. This makes NEO-M8N perfectly suited to industrial and automotive applications.
The NEO-M8 series of concurrent GNSS modules are built on the high performing M8 GNSS engine in the industry proven NEO form factor.NEO-M8N provides the best performance and easier RF integration. The NEO-M8N offers high performance also at low power consumption levels. The future-proof NEOM8N includes an internal Flash that allows future firmware updates. This makes NEO-M8N perfectly suited to industrial and automotive applications.
Features:
- The ceramic antenna provides a very strong signal
- With LED indicator lamp
- The default baud rate: 9600.
- Flash memory: 64KB
- With data backup battery.
- LED signal indicator.
- Compatible with various flight controller module.
- EEPROM save the configuration parameter data when power-down.
-
Assistance AssistNow GNSS Online
-
AssistNow GNSS Offline (up to 35 days)
-
AssistNow Autonomous (up to 6 days)
-
OMA SUPL & 3GPP compliant
-
Oscillator TCXO
-
Built-in RTC crystal
-
Anti-jamming Active CW detection and removal.
-
Extra onboard SAW bandpass filter
-
Memory Flash
-
Supported antennas Active and passive
-
Odometer Travelled distance
-
Data-logger For position, velocity, and time
Specifications:
| Receiver Type | 72-channel Ublox M8 engine. |
|---|---|
| Input Supply Voltage (VDC) | 3 ~ 5 |
| Main Chip | Ublox NEO-M8N |
| Sensitivity (dBm) | 156, Cold Start (without aiding): -147 dBm |
| Position Accuracy (Meter) | 2, 2.5 |
| Acceleration (g) | <4 |
| Navigation Update Rate | up to 18 HZ. |
| Operating Temperature (°C): | -45 to 105 |
| Tracking Sensitivity (dBm) | -161 dBm |
| Co-Ordinate System | WGS-84 |
| Flash memory | 64KB |
| Capture Time | 0.1s Average |
| Avg Cold Start Time (s) | 30 |
| Warm Start Time (s) | 1 |
| Boot Time | 1S |
| Maximum Altitude (m) | 18000 |
| Dimensions in mm (LxWxH) | Antenna: 26 x 26 x 9, Module: 26 x 36 x 4 |
Package Includes:
- 1 x APM 2.5 NEO M8N GPS Module.
- 1 x Ceramic Active Antenna.
NEO-M8N GPS Module with Ceramic Active Antenna Overview
The NEO-M8N GPS Module with Ceramic Active Antenna integrates the high-performance u-blox NEO-M8N GNSS engine and a compact ceramic active antenna for fast, accurate satellite positioning. Ideal for embedding in custom electronics, it delivers reliable GPS, GLONASS, and BeiDou tracking even in challenging signal environments.
Key Features of NEO-M8N GPS Module with Ceramic Active Antenna
- Multi-GNSS support (GPS, GLONASS, BeiDou) for robust satellite visibility.
- Ceramic active antenna ensures strong signal reception and improved fix stability.
- Built-in 64 KB internal flash memory for saving device configurations and future firmware updates.
- Low power consumption design suited for battery-powered and embedded systems.
- UART interface with default 9600 baud rate for easy connection to microcontrollers.
- Fast shipping from Zbotic across India—get your module delivered quickly and securely.
Applications and Use Cases
- DIY drone autopilot systems requiring precise altitude and position data.
- Vehicle tracking devices for fleet management and logistics.
- Outdoor robotics navigation in farming, surveying, or rescue missions.
- Wearable sports trackers that log running or cycling routes.
- Asset tracking beacons for remote equipment monitoring.
How to Use NEO-M8N GPS Module with Ceramic Active Antenna
Connect the module’s UART pins (TX/RX) to your microcontroller’s serial port set at 9600 baud, power it with 3.3–5 V, and place the ceramic antenna in an open-sky location. Use u-blox’s UBX protocol or standard NMEA sentences to configure update rates, save settings to internal flash, and begin receiving position and timing data.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Can I update the firmware on this NEO-M8N module?
Yes. The module’s 64 KB internal flash stores firmware files. Use u-blox’s u-center software and a USB-to-UART adapter to upload the latest M8N firmware over the serial interface.
What operating voltage does the NEO-M8N GPS Module require?
This module accepts a supply voltage between 3.3 V and 5 V. Ensure stable power with proper decoupling capacitors to prevent resets during satellite acquisition.
How fast can I get a position fix under open sky?
Under clear sky conditions, a cold start fix typically occurs within 25 seconds, while hot starts take less than 2 seconds, thanks to the advanced NEO-M8N GNSS engine and ceramic active antenna.
Drone FPV Camera: CMOS vs CCD, Latency, and FOV
Table of Contents Understanding Drone FPV Camera Key Components and Requirements Step-by-Step Setup Guide Configuration and Optimisation Practical...
Read More →
How to Register a Drone in India on the DigiSky Portal (2026 Guide)
How to Register a Drone in India on the DigiSky Portal (2026 Guide) India's drone regulations have evolved...
Read More →
ExpressLRS vs ELRS vs FrSky: Best RC Link System 2026
ExpressLRS vs FrSky vs Other RC Link Systems: Best Choice for Indian Drone Pilots in 2026 Choosing the...
Read More →Technical Specifications
| Model | NEO-M8N |
|---|---|
| SKU | AI2547 |
| Weight | 0.0182 kg |
| Availability | Out of Stock |
Applications & Use Cases
The NEO-M8N GPS Module with Ceramic Active Antenna is a versatile gps modules used across a wide range of applications including electronics projects, DIY builds, prototyping, and educational experiments.
Common use cases:
- Integrating into a custom electronics project
- Learning and experimenting with circuits
- Replacing or upgrading components in existing setups
This product is ideal for electronics enthusiasts, engineers, and students.
Technical Tip: Always verify voltage and current requirements before connecting to your circuit. Check datasheets for detailed specifications and pin configurations.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
