Looking for Pm08 Module? Holybro PM08 Power Module (14S, 200A) is available at Zbotic with fast shipping across India.
The PM08 Power Module provides a regulated 5.2V to the flight controller from the battery and offers current consumption and battery voltage measurements through an analog signal via a 6 Pin JST-GH cable to the Autopilot.
Designed for vehicles with high power demands, this module is encased in an aluminum heat sink with a fan, shielding it from external elements and efficiently dissipating heat generated during operation, ensuring longevity and consistent performance.
Important Notes:
– This analog power module is incompatible with Pixhawk 5X/6X. For these series, please use a digital power module ending with “D.”
– Wires and connectors are not included and must be purchased separately.
Features:
- Support 2S – 14S Battery
- 200A Cont. Current Rating
- Easy to Setup
- Aluminum Case for Heat dissipation
specification
| nput Voltage | 2S-14S |
|---|---|
| PCB Cont. Current Rating | 200A |
| PCB Burst Current Rating | 1000A (<1 Sec @25C) |
| Max Current Sensing | 237.6A |
| Output | DC 5.1-5.3V & 3A Max |
| Voltage Divider | 18.182 |
| Amperes per Volt | 72 |
| Dimensions | 101*45*26mm |
Package Includes:
1 x Holybro PM08 Power Module (14S, 200A)
Holybro PM08 Power Module Overview
The Holybro PM08 Power Module (14S, 200A) is an analog power distribution and sensing unit designed for high-current UAV and robotics applications. It regulates battery voltage down to 5.2 V for your flight controller while measuring battery voltage and current through an analog output.
Key Features of Holybro PM08 Power Module
- Supports 2S–14S LiPo batteries with a continuous 200 A current rating
- Built-in aluminum case and fan for efficient heat dissipation and protection
- Provides regulated 5.2 V output to power flight controllers
- 6-pin JST-GH analog output cable for voltage and current telemetry
- Compact footprint (101 × 45 × 26 mm) and lightweight design (151 g)
- Genuine product, fast shipping from Zbotic across India
Applications and Use Cases
- Power and telemetry for large multirotor drones drawing high currents
- Fixed-wing UAVs and electric gliders requiring accurate battery monitoring
- Ground robotics platforms with heavy-duty brushless or DC motors
- Long-range VTOL crafts where heat management is critical
- High-performance RC cars and boats with real-time voltage and current feedback
How to Use Holybro PM08 Power Module
Mount the PM08 using the 79 × 38.1 mm hole pattern with M3 screws on a flat, heat-conductive surface. Solder the battery leads to the heavy-gauge input wires, then plug the 6-pin JST-GH cable into your autopilot’s analog power module port. Configure the voltage and current sensor parameters in your flight controller firmware to begin real-time monitoring.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Is the PM08 Power Module compatible with Pixhawk 5X/6X?
No. The PM08 is an analog module and does not support PIXHAWK 5X/6X. For those controllers, use the digital version (model ending with “D”).
What wiring and connectors are included?
The PM08 ships with heavy-gauge battery input leads pre-soldered and a 6-pin JST-GH cable to connect directly to your flight controller’s power module port.
How do I ensure proper heat dissipation?
Mount the module to a metal or carbon plate using its aluminum case and integrated fan. Ensure airflow around the unit and avoid enclosing it in tight compartments.
Drone Payload Systems: Drop Mechanism Design and Build Guide
Table of ContentsIntroductionApplications of Drone Payload Systems in IndiaTypes of Payload Drop MechanismsServo-Actuated Drop Mechanism: Design and BuildElectromagnet...
Read More →
X-Class Drone Build: Giant Racing Quad Guide
Table of Contents Understanding X-Class Drone Build Key Components and Requirements Step-by-Step Setup Guide Configuration and Optimisation Practical...
Read More →
FPV Freestyle Tricks Tutorial: Rolls, Flips and Split-S
FPV Freestyle Tricks Tutorial: Rolls, Flips and Split-S FPV freestyle is one of the most exciting forms of...
Read More →Technical Specifications
| Brand | Holybro |
|---|---|
| Model | PM08 |
| Current Rating | 200A |
| SKU | AI6042 |
| Availability | Out of Stock |
Applications & Use Cases
The Holybro PM08 Power Module (14S, 200A) is a versatile flight controller & accessories used across a wide range of applications including autonomous drones, FPV racing quadcopters, agricultural drones, and surveying and mapping platforms.
Common use cases:
- Central brain for drone stabilization and navigation
- GPS waypoint missions for surveying
- Acro mode flying for FPV freestyle
This product is ideal for drone builders requiring precise flight control.
Technical Tip: F4 processors are good for basic builds; F7 or H7 recommended for advanced features. Ensure firmware compatibility (Betaflight, ArduPilot, iNAV).
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine Holybro product sourced from authorized channels
Akshat Chatterjee –
Amazing build quality! This Holybro PM08 Power is sturdy and lightweight at the same time.
Ishan Bhat (verified owner) –
This Holybro PM08 Power exceeded my expectations. Installed it yesterday and took a successful test flight today.
Aditi Patil (verified owner) –
This Holybro PM08 Power exceeded my expectations. Installed it yesterday and took a successful test flight today.
Pranav Garg (verified owner) –
Very impressed with this Holybro PM08 Power. My drone’s performance improved noticeably.
Yashwant Banerjee –
Great Holybro PM08 Power for beginners and professionals alike. Highly recommended for drone enthusiasts.
Ayush Bose (verified owner) –
Solid Holybro PM08 Power. Not the absolute best but excellent value for the price point.
Gauri Solanki (verified owner) –
Received the Holybro PM08 Power in great condition. Testing done, everything works perfectly.
Vijay Gill (verified owner) –
Very impressed with this Holybro PM08 Power. My drone’s performance improved noticeably.
Bhavna Desai (verified owner) –
Great quality Holybro PM08 Power. Perfect specs for my drone project. Fast delivery too!
Rashmi Yadav –
Received the Holybro PM08 Power in great condition. Testing done, everything works perfectly.
Aditi Khanna (verified owner) –
Been using this Holybro PM08 Power for 3 months now, zero issues. Great product.
Rohan Dhillon (verified owner) –
Using this Holybro PM08 Power in my hexacopter. Smooth operation and excellent thrust.
Sunil Shetty (verified owner) –
Outstanding Holybro PM08 Power! Installed it on my racing quad and the performance is amazing.
Dhruv Joshi (verified owner) –
Great Holybro PM08 Power for beginners and professionals alike. Highly recommended for drone enthusiasts.
Hemant Vohra (verified owner) –
My 5th order from Zbotic. This Holybro PM08 Power is excellent as always. Totally reliable store.
Darshan Menon (verified owner) –
Superb Holybro PM08 Power! Built my first drone with this and it performed beyond expectations.
Ankit Naidu –
Bought this for my college drone project. Works great, professor was impressed!
Dinesh Batra –
Very good quality Holybro PM08 Power. I’ve been building drones for 2 years now and this is one of the best I’ve used.
Anirudh Kulkarni (verified owner) –
Amazing build quality! This Holybro PM08 Power is sturdy and lightweight at the same time.
Aisha Rawat (verified owner) –
Outstanding Holybro PM08 Power! Installed it on my racing quad and the performance is amazing.
Vidya Nayak (verified owner) –
Great Holybro PM08 Power for beginners and professionals alike. Highly recommended for drone enthusiasts.
Hardik Sen (verified owner) –
Received the Holybro PM08 Power in great condition. Testing done, everything works perfectly.
Pranav Sethi (verified owner) –
Superb Holybro PM08 Power! Built my first drone with this and it performed beyond expectations.
Pooja Luthra (verified owner) –
This Holybro PM08 Power is value for money. Comparing with other brands, Zbotic offers the best deal.
Sandhya Mehta (verified owner) –
Pretty good Holybro PM08 Power. Works as expected for my drone project. Would buy again.
Vinay Kumar –
This Holybro PM08 Power is value for money. Comparing with other brands, Zbotic offers the best deal.
Diya Khurana (verified owner) –
Excellent Holybro PM08 Power! Perfect for my quadcopter build. Arrived well packed and works flawlessly.
Dev Negi (verified owner) –
Using this Holybro PM08 Power in my FPV drone build. Quality is top notch. Very happy with the purchase.
Riya Rao (verified owner) –
Outstanding Holybro PM08 Power! Installed it on my racing quad and the performance is amazing.
Naman Vyas (verified owner) –
This Holybro PM08 Power exceeded my expectations. Installed it yesterday and took a successful test flight today.
Divyansh Khurana (verified owner) –
My 5th order from Zbotic. This Holybro PM08 Power is excellent as always. Totally reliable store.
Sanya Khanna (verified owner) –
Excellent product for the price. My drone flies smoothly with this Holybro PM08 Power. Highly recommended!
Urmi Dhawan (verified owner) –
Solid Holybro PM08 Power. Not the absolute best but excellent value for the price point.
Eshan Negi (verified owner) –
Top quality Holybro PM08 Power. I’m a regular customer of Zbotic and they never disappoint.
Girish Bhat (verified owner) –
Very good quality Holybro PM08 Power. I’ve been building drones for 2 years now and this is one of the best I’ve used.