Looking for V3s Flight Control? F4 Pro V2 V3.5 v3s Flight Control Built-in OSD / BEC is available at Zbotic with fast shipping across India.
This Flight Control has Built-in OSD (On Screen Display)/ BEC (Battery Eliminator Circuit)
BEC (Battery Eliminator Circuit):
In battery-powered equipment, a battery eliminator circuit (BEC) is an electronic voltage regulator used to power a subsystem at a different voltage without the need for a supplemental battery. BECs are commonly used in radio-controlled models, which need separate voltages to power the motor and the R/C equipment.
Feature:
- Flight Control Built-in OSD / BEC
- Micro-SD Back-box
- Built-in Current Sensor
- F4 Processor (F405)
- On-Board Video Filter (only can supply 5V to VTX and Camera)
Package includes:
1 x F4 Pro V2 V3.5 v3s Flight Control Built-in OSD / BEC
F4 Pro V2 V3.5 v3s Flight Control Built-in OSD / BEC Overview
The F4 Pro V2/V3.5/V3s Flight Control is an Omnibus F4-based board designed for multirotor drones and FPV applications. It integrates an STM32 F4 processor, onboard OSD over SPI, a BEC for peripheral power, microSD Blackbox logging and an optional BMP280 barometer for altitude sensing.
Key Features of F4 Pro V2 V3.5 v3s Flight Control Built-in OSD / BEC
- High-performance STM32 F4 processor for faster control loops and precise flight stability
- SPI Gyro IC268G for low-latency attitude sensing
- On-board OSD controlled via Betaflight over SPI bus—overlay real-time telemetry on video feed
- Built-in BEC provides regulated power for flight controller, receiver and camera from main battery
- MicroSD slot with Blackbox support for flight data logging and post-flight analysis
- BMP280 barometer (disabled by default)—enable in Betaflight configurator or contact us for assistance
- Genuine product with fast shipping across India from Zbotic
Applications and Use Cases
- FPV racing drones requiring real-time voltage and current telemetry on video goggles
- Long-range quadcopters where onboard BEC powers cameras and receivers reliably
- DIY and custom drone builds upgrading from F3 to F4 flight control performance
- Educational platforms for students learning flight control and in-flight data logging
- Autonomous UAV prototypes utilizing barometer-assisted altitude hold
How to Use F4 Pro V2 V3.5 v3s Flight Control Built-in OSD / BEC
Mount the flight controller on your drone using anti-vibration standoffs and connect power, ESC signal wires and receiver to the designated pads. Insert a microSD card for Blackbox logging, then flash Betaflight firmware via USB. In Betaflight Configurator enable the SPI OSD in the OSD tab and, if required, enable the BMP280 barometer under the Sensors tab. Finally, configure PID settings, motor outputs and failsafe before your first flight.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
How do I enable the onboard barometer?
After flashing Betaflight, connect to Betaflight Configurator and navigate to the “Configuration” or “Sensors” tab. Locate the BMP280 barometer option, enable it, save and reboot. If you encounter issues, contact Zbotic technical support for step-by-step assistance.
What voltage does the built-in BEC output?
The integrated BEC on the F4 Pro provides a regulated 5 V output to power your flight controller, receiver and camera directly from the main LiPo battery. Simply route your device power leads to the 5 V BEC pads on the board.
Do I need to flash custom firmware on this board?
Yes. The F4 Pro series ships without pre-installed firmware. Download and flash the latest Betaflight firmware for the STM32 F4 variant using Betaflight Configurator. Select the correct target (e.g., “OMNIBUSF4PRO”) before flashing to ensure optimal performance.
iNAV Setup Guide: GPS Autonomous Flight Step-by-Step
iNAV Setup Guide: GPS Autonomous Flight Step-by-Step iNAV (Inertial Navigation) is the premier open-source flight controller firmware for...
Read More →
Tethered Drone Build: Unlimited Flight Time for Events and Surveillance
Tethered Drone Build: Unlimited Flight Time for Events and Surveillance Imagine a drone that can hover for eight...
Read More →
Tiny Whoop Build: 65mm Indoor FPV Drone Guide
Table of Contents Understanding Tiny Whoop Build Key Components and Requirements Step-by-Step Setup Guide Configuration and Optimisation Practical...
Read More →Technical Specifications
| SKU | AI4347 |
|---|---|
| Weight | 0.01236 kg |
| Availability | Out of Stock |
Applications & Use Cases
The F4 Pro V2 V3.5 v3s Flight Control Built-in OSD / BEC is a versatile flight controller & accessories used across a wide range of applications including autonomous drones, FPV racing quadcopters, agricultural drones, and surveying and mapping platforms.
Common use cases:
- Central brain for drone stabilization and navigation
- GPS waypoint missions for surveying
- Acro mode flying for FPV freestyle
This product is ideal for drone builders requiring precise flight control.
Technical Tip: F4 processors are good for basic builds; F7 or H7 recommended for advanced features. Ensure firmware compatibility (Betaflight, ArduPilot, iNAV).
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Ajay Shah (verified owner) –
Superb F4 Pro V2 V3.5 v3s Flight! Built my first drone with this and it performed beyond expectations.
Rakesh Solanki –
Average F4 Pro V2 V3.5 v3s Flight. Works fine but expected slightly better quality at this price.
Daksh Rawat (verified owner) –
Very impressed with this F4 Pro V2 V3.5 v3s Flight. My drone’s performance improved noticeably.
Akshat Kumar (verified owner) –
Great F4 Pro V2 V3.5 v3s Flight for beginners and professionals alike. Highly recommended for drone enthusiasts.
Prashant Khanna (verified owner) –
Great F4 Pro V2 V3.5 v3s Flight for beginners and professionals alike. Highly recommended for drone enthusiasts.
Diya Rathore (verified owner) –
Amazing build quality! This F4 Pro V2 V3.5 v3s Flight is sturdy and lightweight at the same time.
Ashwin Garg (verified owner) –
Good product overall. My drone is flying well with this F4 Pro V2 V3.5 v3s Flight. Satisfied with the purchase.
Amit Bose (verified owner) –
Decent F4 Pro V2 V3.5 v3s Flight for the price. Using it in my quadcopter, performs well overall.
Shruti Ghosh (verified owner) –
Perfect for my agriculture drone project. This F4 Pro V2 V3.5 v3s Flight handles the weight effortlessly.
Utkarsh Dave (verified owner) –
Received the F4 Pro V2 V3.5 v3s Flight in great condition. Testing done, everything works perfectly.
Kunal Rathore –
This F4 Pro V2 V3.5 v3s Flight exceeded my expectations. Installed it yesterday and took a successful test flight today.
Kritika Singh –
Using this F4 Pro V2 V3.5 v3s Flight in my FPV drone build. Quality is top notch. Very happy with the purchase.
Sandeep Thakur (verified owner) –
My 5th order from Zbotic. This F4 Pro V2 V3.5 v3s Flight is excellent as always. Totally reliable store.
Deepika Verma (verified owner) –
This F4 Pro V2 V3.5 v3s Flight exceeded my expectations. Installed it yesterday and took a successful test flight today.
Lalit Nayak (verified owner) –
Excellent product for the price. My drone flies smoothly with this F4 Pro V2 V3.5 v3s Flight. Highly recommended!
Ravi Jain (verified owner) –
Using this F4 Pro V2 V3.5 v3s Flight in my FPV drone build. Quality is top notch. Very happy with the purchase.
Hemant Kulkarni (verified owner) –
Outstanding F4 Pro V2 V3.5 v3s Flight! Installed it on my racing quad and the performance is amazing.
Tarun Dhillon –
Great quality F4 Pro V2 V3.5 v3s Flight. Perfect specs for my drone project. Fast delivery too!
Jatin Gill (verified owner) –
Been using this F4 Pro V2 V3.5 v3s Flight for 3 months now, zero issues. Great product.
Manish Khurana (verified owner) –
This F4 Pro V2 V3.5 v3s Flight is value for money. Comparing with other brands, Zbotic offers the best deal.
Karan Mishra (verified owner) –
Received the F4 Pro V2 V3.5 v3s Flight in great condition. Testing done, everything works perfectly.
Tanya Iyer (verified owner) –
My 5th order from Zbotic. This F4 Pro V2 V3.5 v3s Flight is excellent as always. Totally reliable store.
Akash Gill (verified owner) –
Excellent F4 Pro V2 V3.5 v3s Flight! Perfect for my quadcopter build. Arrived well packed and works flawlessly.
Zubin Kumar –
Received the F4 Pro V2 V3.5 v3s Flight in great condition. Testing done, everything works perfectly.
Nakul Parekh (verified owner) –
Using this F4 Pro V2 V3.5 v3s Flight in my hexacopter. Smooth operation and excellent thrust.
Diya Nayak (verified owner) –
Bought this for my college drone project. Works great, professor was impressed!
Deepika Malhotra (verified owner) –
Using this F4 Pro V2 V3.5 v3s Flight in my hexacopter. Smooth operation and excellent thrust.
Ashwin Patel (verified owner) –
Good F4 Pro V2 V3.5 v3s Flight. Works well for my drone build. Packaging could be slightly better.
Anushka Vohra (verified owner) –
Decent F4 Pro V2 V3.5 v3s Flight for the price. Using it in my quadcopter, performs well overall.
Neeraj Tandon (verified owner) –
Top quality F4 Pro V2 V3.5 v3s Flight. I’m a regular customer of Zbotic and they never disappoint.
Mukesh Luthra (verified owner) –
Perfect for my agriculture drone project. This F4 Pro V2 V3.5 v3s Flight handles the weight effortlessly.
Ayush Jain (verified owner) –
Superb F4 Pro V2 V3.5 v3s Flight! Built my first drone with this and it performed beyond expectations.