This is the 5mm variant of the 220 x 220 x 0.5mm Frosted Heated Bed Sticker Build Plate Tape with Adhesive Backing for 3D Printer in 3D Printer Heatbed and Accessories. Available at ₹275.70 (₹233.64 + GST) with free shipping across India.
220 x 220 x 0.5mm Frosted Heated Bed Sticker Build Plate Tape with Adhesive Backing for 3D Printer
This product is a 220 x 220 x 0.5mm frosted heated bed sticker with adhesive backing for 3D printers. It is made of special rough PC chip that prevents the 3D printed models from warping and keeps the surface smooth.
The PC chip is produced by co-extrusion molding, which is insulated, environmentally friendly and pollution-free. The PC chip has a coarse texture with many small holes on the surface, which can effectively improve the cooling effect of the 3D filament and reduce the curling edges during the printing process.
The product has a durable structure that allows for the use of different or same filament materials. It has a single board design that makes it easy to install and less prone to bubbles than the tape.
How to use:
There are 2 methods to attaching the build surface on heatbed:
1. Clamp the build surface to the print bed using binder clips(at least 3 clips).
2. Torn off adhesive tape on the back and stick it on heatbed.
Features:
- Suitable for PLA, ABS, HIPS, PETG, TPE filament, nylon, PC, RETT material. Usage for the Anet A6 A8 3D Printer
- Provides extra adhesive force between filament and heating board.
- Effectively prevents deformation of ABS, PLA filament.
- Simple design, fast installation.
- Dull polish treated surface, reusable 3D printer accessory.
- Installs much easier than masking tape or films typically used and with fewer chances of air bubbles
- Protects build plate
- Heat resistant and durable can be reused for many consecutive builds and you can use different filament materials without the need to change the printing surface
- Creates an optimal bond between the 3D printed object and build a surface that maximizes the chances your object will be held in place for the duration of the print and then allow for clean and easy removal of the object from the build surface.
Specification:
Package Includes:
1 x 220 x 220 x 0.5mm Frosted Heated Bed Sticker for 3D Printer
Frosted Heated Bed Sticker Build Plate Tape with Adhesive Overview
This 220 × 220 × 0.5 mm frosted heated bed sticker is designed to adhere directly to your 3D printer’s build plate, providing extra grip and a finely textured finish. Made from a rough PC chip via co-extrusion molding, it prevents warping and curling on materials like PLA, ABS, PETG, nylon and more, while protecting your original heatbed surface.
Key Features of Frosted Heated Bed Sticker Build Plate Tape with Adhesive
- Precise dimensions (220 × 220 × 0.5 mm) with strong adhesive backing for secure fit
- Frosted, coarse-textured PC chip surface with micro-holes to boost adhesion and cooling
- Insulated, environmentally friendly material produced by co-extrusion molding
- Reduces warping and curling edges on ABS, PLA, HIPS, PETG, TPE, nylon, PC and RETT
- Durable single-sheet design is reusable and features a dull-polish finish
- Faster, bubble-free installation compared to masking tape or traditional build films
- Protects your original build plate from scratches and filament residue
- Genuine product with fast shipping from Zbotic
Applications and Use Cases
- Secure printing of functional prototypes and mechanical parts without warping
- Multi-material prints involving PLA, ABS, PETG, nylon and other filaments
- Large or small batch production where consistent adhesion is critical
- Hobbyist models, figurines and architectural mockups with fine detail
- Educational settings where quick bed preparation and cleanup are needed
- Replacement surface for Anet A6, A8 or any 220 × 220 mm heatbed
How to Use Frosted Heated Bed Sticker Build Plate Tape with Adhesive
Ensure your heatbed is clean and free of oil or debris, then peel the protective film off the adhesive side of the sticker. Carefully align one edge with your 220 × 220 mm build plate and press down, smoothing out any bubbles as you go. Preheat the bed to your filament’s recommended temperature, start your print, and once finished, let the bed cool before gently removing prints. Clean the sticker surface with isopropyl alcohol as needed to maintain adhesion.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Will this sticker fit my 3D printer?
This build plate tape measures 220 × 220 × 0.5 mm and is ideal for any printer with a matching heatbed size, including popular models like the Anet A6 and A8.
Which filaments work best on this frosted surface?
The rough PC chip texture provides strong adhesion for PLA, ABS, HIPS, PETG, TPE, nylon, PC and RETT, reducing warping and curling across a wide range of materials.
How long can I reuse the heated bed sticker?
With proper care—cleaning after prints and avoiding sharp tools—you can reuse the sticker for dozens of prints. Replace it when the surface texture wears down or adhesion begins to diminish.
3D Printer Hotend Guide: All-Metal vs PTFE Lined
Table of Contents What Is a Hotend and How It Works PTFE Lined Hotends Explained All-Metal Hotends Explained...
Read More →
Custom Jigs and Fixtures: 3D Printing for Manufacturing
Indian manufacturers are saving lakhs by replacing CNC-machined tooling with 3D printed jigs and fixtures. Assembly aids, alignment...
Read More →
Hardened Steel vs Brass Nozzle: When to Upgrade Your 3D Printer Nozzle
Hardened Steel vs Brass Nozzle: When to Upgrade Your 3D Printer Nozzle The nozzle is the last point...
Read More →Technical Specifications
| Dimensions | 220x220x0.5mm |
|---|---|
| Resolution | 220x220 |
| Package Quantity | 220 pcs |
| SKU | AI2738 |
| Weight | 0.03705 kg |
| Availability | Out of Stock |
Applications & Use Cases
The 220 x 220 x 0.5mm Frosted Heated Bed Sticker Build Plate Tape with Adhesive Backing for 3D Printer is a versatile 3d printer heatbed and accessories used across a wide range of applications including 3D printer maintenance, printer upgrades, custom printer builds, and replacement parts.
Common use cases:
- Replacing a worn-out nozzle or extruder gear
- Upgrading to a direct drive extruder
- Building a custom CoreXY printer
This product is ideal for 3D printer owners and custom printer builders.
Technical Tip: Keep spare nozzles, PTFE tubes, and belts on hand. Regular maintenance significantly extends printer life and print quality.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
