This is the 8inch variant of the Waveshare ESP32-S3 2.8inch Capacitive Touch Round Display Development Board in IoT Development Boards. Available at ₹4,708.20 (₹3,990.00 + GST) with free shipping across India.
Waveshare ESP32-S3 2.8inch Capacitive Touch Round Display Development Board
The Waveshare ESP32-S3 2.8inch Capacitive Touch Round Display Development Board is a microcontroller development board with 2.4GHz WiFi and Bluetooth BLE 5 support, integrating high-capacity Flash and PSRAM.
Onboard 2.8inch capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, it is suitable for the quick development of HMI and other ESP32-S3 applications.
Features:
-
Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
-
Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
-
Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
-
Onboard 2.8inch capacitive touch display, 480×480 resolution
-
Supports touch control via I2C interface, with interrupt support
-
Adapting UART, I2C, and some IO interfaces, integrates full-speed USB port
-
Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
-
Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
Specification:
| Item Type: | Display Development Board |
|---|---|
| Processor | Xtensa 32-bit LX7 dual-core, up to 240MHz |
| Memory: | 512KB SRAM, 384KB ROM, 16MB Flash, 8MB PSRAM |
| Display: | 2.8-inch capacitive touch, 480×480 resolution |
| Connectivity | Type-C USB, USB 1.1 |
| Interface: | UART, I2C, USB port |
| Sensor | QMI8658 6-axis sensor |
| Display Panel | IPS |
| Resolution: | 480 × 480 |
| Communication Interface | RGB |
| Display Size (Inch): | 2.8 inch |
| Driver IC | ST7701
|
Package Includes:
1 x Waveshare ESP32-S3 2.8inch Capacitive Touch Round Display Development Board
ESP32 Troubleshooting: Boot Loop, Brownout and Flash Fix
ESP32 troubleshooting boot loop brownout flash errors are among the most frustrating experiences for IoT developers and hobbyists...
Read More →
ESP32 Watchdog Timer: Prevent System Freeze in Production
Deploying an ESP32 watchdog timer to prevent freeze in production environments is not optional — it is a...
Read More →
Modbus to MQTT Bridge: Integrate Legacy Industrial Sensors
Table of Contents Structural Health Monitoring Overview Vibration and Strain Sensors Sensor Node Design Data Collection Architecture Analysis...
Read More →Technical Specifications
| Brand | WAVESHARE |
|---|---|
| Model | ESP32-S3 |
| Display Size | 2.8" |
| SKU | AI7736 |
| Weight | 0.08 kg |
| Availability | Out of Stock |
Applications & Use Cases
The Waveshare ESP32-S3 2.8inch Capacitive Touch Round Display Development Board is a versatile iot development boards used across a wide range of applications including rapid IoT prototyping, connected sensor platforms, edge computing, wearable devices, and home automation.
Common use cases:
- Prototyping a smart environmental monitor
- Building a BLE-connected fitness tracker
- Creating an edge AI inference device
This product is ideal for IoT engineers, embedded developers, and electronics students.
Technical Tip: Development boards with built-in displays and sensors accelerate prototyping. Check GPIO count and peripheral support for your project needs.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine WAVESHARE product sourced from authorized channels
Ayush Chopra –
This Waveshare ESP32-S3 2.8inch Capacitive Touch Round is a beast for the price. Running a web server on it with no issues.
Rohan Vyas (verified owner) –
Outstanding Waveshare ESP32-S3 2.8inch Capacitive Touch Round! Programmed it with Arduino IDE. All features work as documented.
Mahesh Rawat –
Good Waveshare ESP32-S3 2.8inch Capacitive Touch Round. WiFi works well. Sometimes needs a reset but overall solid.
Jai Vohra –
This Waveshare ESP32-S3 2.8inch Capacitive Touch Round is amazing for home automation. Connected all my smart devices easily.
Sunil Banerjee –
Excellent Waveshare ESP32-S3 2.8inch Capacitive Touch Round! WiFi connectivity is strong and stable. Perfect for IoT projects.
Sakshi Solanki (verified owner) –
Excellent Waveshare ESP32-S3 2.8inch Capacitive Touch Round! WiFi connectivity is strong and stable. Perfect for IoT projects.
Yashwant Patel –
Great quality Waveshare ESP32-S3 2.8inch Capacitive Touch Round. Flashed with ESPHome and it works beautifully.
Vivek Tiwari (verified owner) –
Good quality Waveshare ESP32-S3 2.8inch Capacitive Touch Round. Flash memory is sufficient for most projects.
Raj Bose (verified owner) –
Excellent for smart home projects. This Waveshare ESP32-S3 2.8inch Capacitive Touch Round connects reliably to my router.
Chitra Bhatt (verified owner) –
Good Waveshare ESP32-S3 2.8inch Capacitive Touch Round. WiFi works well. Sometimes needs a reset but overall solid.
Arun Jain (verified owner) –
Perfect for my IoT project. This Waveshare ESP32-S3 2.8inch Capacitive Touch Round has excellent WiFi performance.
Shruti Batra (verified owner) –
Good Waveshare ESP32-S3 2.8inch Capacitive Touch Round. WiFi works well. Sometimes needs a reset but overall solid.
Rohit Kamath (verified owner) –
This Waveshare ESP32-S3 2.8inch Capacitive Touch Round is amazing for home automation. Connected all my smart devices easily.
Sarthak Rathore (verified owner) –
Perfect for my IoT project. This Waveshare ESP32-S3 2.8inch Capacitive Touch Round has excellent WiFi performance.
Aman Sethi (verified owner) –
Perfect for my IoT project. This Waveshare ESP32-S3 2.8inch Capacitive Touch Round has excellent WiFi performance.
Parth Patil (verified owner) –
Love this Waveshare ESP32-S3 2.8inch Capacitive Touch Round. Built a smart switch with it. Works with Home Assistant perfectly.
Ishaan Jain –
Nice Waveshare ESP32-S3 2.8inch Capacitive Touch Round for IoT prototyping. Breadboard compatible which is a plus.
Chitra Arora (verified owner) –
This Waveshare ESP32-S3 2.8inch Capacitive Touch Round is a beast for the price. Running a web server on it with no issues.
Lakshya Rao (verified owner) –
Nice Waveshare ESP32-S3 2.8inch Capacitive Touch Round for IoT prototyping. Breadboard compatible which is a plus.
Dhruv Saini (verified owner) –
Good Waveshare ESP32-S3 2.8inch Capacitive Touch Round. WiFi works well. Sometimes needs a reset but overall solid.
Deepak Rawat (verified owner) –
Outstanding Waveshare ESP32-S3 2.8inch Capacitive Touch Round! Programmed it with Arduino IDE. All features work as documented.
Tejas Kohli –
Great quality Waveshare ESP32-S3 2.8inch Capacitive Touch Round. Flashed with ESPHome and it works beautifully.
Rajesh Reddy –
Excellent for smart home projects. This Waveshare ESP32-S3 2.8inch Capacitive Touch Round connects reliably to my router.
Meera Pandey (verified owner) –
Outstanding Waveshare ESP32-S3 2.8inch Capacitive Touch Round! Programmed it with Arduino IDE. All features work as documented.
Gauri Saini (verified owner) –
This Waveshare ESP32-S3 2.8inch Capacitive Touch Round is amazing for home automation. Connected all my smart devices easily.
Naman Bhandari (verified owner) –
Love this Waveshare ESP32-S3 2.8inch Capacitive Touch Round. Built a smart switch with it. Works with Home Assistant perfectly.
Yogesh Tandon (verified owner) –
Love this Waveshare ESP32-S3 2.8inch Capacitive Touch Round. Built a smart switch with it. Works with Home Assistant perfectly.
Anil Nair (verified owner) –
Outstanding Waveshare ESP32-S3 2.8inch Capacitive Touch Round! Programmed it with Arduino IDE. All features work as documented.
Shruti Solanki (verified owner) –
Love this Waveshare ESP32-S3 2.8inch Capacitive Touch Round. Built a smart switch with it. Works with Home Assistant perfectly.
Neha Sethi (verified owner) –
Excellent Waveshare ESP32-S3 2.8inch Capacitive Touch Round! WiFi connectivity is strong and stable. Perfect for IoT projects.
Anil Iyer (verified owner) –
Great Waveshare ESP32-S3 2.8inch Capacitive Touch Round. OTA updates work perfectly. Using 5 of these around my house.
Zara Vyas (verified owner) –
Great quality Waveshare ESP32-S3 2.8inch Capacitive Touch Round. Flashed with ESPHome and it works beautifully.
Ojas Modi (verified owner) –
Excellent for smart home projects. This Waveshare ESP32-S3 2.8inch Capacitive Touch Round connects reliably to my router.
Devansh Kumar (verified owner) –
Great quality Waveshare ESP32-S3 2.8inch Capacitive Touch Round. Flashed with ESPHome and it works beautifully.
Manoj Gill (verified owner) –
Nice Waveshare ESP32-S3 2.8inch Capacitive Touch Round for IoT prototyping. Breadboard compatible which is a plus.