Looking for Vl53l1x Lidar? Holybro ST VL53L1X Lidar is available at Zbotic with fast shipping across India.
The VL53L1X is state-of-the-art, it is a cutting-edge sensor that employs Time-of-Flight technology to measure distances accurately and rapidly. Enhancing the ST FlightSense™ product family. It is the fastest miniature ToF sensor on the market with accurate ranges of up to 4 m and a ranging frequency of up to 50 Hz.
Features:
- Pin-to-pin is compatible with the VL53L0X FlightSense™ ranging sensor.
- Fast and accurate long-distance ranging – Up to 400 cm distance measurement – Up to 50 Hz ranging frequency
- Typical full field-of-view (FoV): 27
- Programmable region-of-interest (ROI) size on the receiving array, allowing the sensor FoV to be reduced
- Programmable ROI position on the receiving array, providing multizone operation control from the host
Specification-
| Product | Holybro ST VL53L1X Lidar |
|---|---|
| Working Voltage | 3.3 to 5 V |
| Communication Interface | 12C |
| Length (mm): | 28 |
| Width (mm): | 13 |
| Height (mm): | 8 |
| Weight (g): | 8g |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 12 × 8 × 1 cm |
Package Includes
1x VL53L1X
1x GH4P 200mm Cable(installed)
1x TPU Protective Case Shell
Holybro ST VL53L1X Lidar Overview
The Holybro ST VL53L1X Lidar is a compact Time-of-Flight distance sensor designed for precision ranging up to 4 meters. With its miniature form factor and high-speed measurement capability, it is ideal for robotics, drones, and embedded distance-sensing applications.
Key Features of Holybro ST VL53L1X Lidar
- Accurate ranging up to 400 cm with a maximum update rate of 50 Hz
- Pin-to-pin compatible with VL53L0X FlightSense™ modules for easy upgrades
- Programmable region-of-interest (ROI) to tailor field-of-view for specific tasks
- Compact dimensions (25 × 10.7 × 3.2 mm) and lightweight design (2.4 g)
- Wide operating voltage range of 3.3–5 V and standard I2C interface
- Fast shipping across India—order today and receive it swiftly from Zbotic
Applications and Use Cases
- Obstacle detection and avoidance for mobile robots and rovers
- Altitude hold and terrain following in UAVs and multirotors
- Proximity sensing in automated assembly lines and industrial equipment
- Hand gesture recognition and interactive user interfaces
- Level measurement in tanks, silos, and storage containers
- Smart home automation for presence detection and safety fencing
How to Use Holybro ST VL53L1X Lidar
To integrate the VL53L1X Lidar, connect its VIN pin to a 3.3–5 V supply, GND to system ground, and SDA/SCL to your microcontroller’s I2C bus. Install ST’s VL53L1X driver library, configure the I2C address if needed, then initialize the sensor and read distance measurements in your control loop at up to 50 Hz.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
What supply voltage does the VL53L1X require?
The Holybro ST VL53L1X operates from a 3.3 V to 5 V supply, making it compatible with most microcontroller and single-board computer I/O levels.
How do I read distance measurements over I2C?
Use ST’s VL53L1X library to initialize the sensor on your I2C bus, start continuous ranging mode, then poll or use interrupt-ready flags to retrieve distance values at up to 50 Hz.
Can I adjust the field-of-view for focused sensing?
Yes, the VL53L1X supports a programmable region-of-interest (ROI) on its receiver array, allowing you to narrow the field-of-view for targeted distance measurements.
Flame and Fire Sensor: IR Detection for Safety Systems
Fire detection is one of the most critical safety functions in any building, factory, or automated system. Flame...
Read More →
Distance Sensor Comparison: Ultrasonic vs IR vs Laser Ranging
Distance measurement is one of the most common requirements in robotics, automation, IoT, and embedded electronics. Three fundamentally...
Read More →
ADXL345 Accelerometer: 3-Axis Motion and Tilt Detection with Arduino
The ADXL345 is one of the most versatile and affordable 3-axis digital accelerometers available to makers, students, and...
Read More →Technical Specifications
| Brand | Holybro |
|---|---|
| SKU | AI5720 |
| Weight | 0.02 kg |
| Availability | Out of Stock |
Applications & Use Cases
The Holybro ST VL53L1X Lidar is a versatile lidar sensor used across a wide range of applications including robot navigation, obstacle detection, indoor mapping, autonomous vehicles, and distance measurement.
Common use cases:
- Adding obstacle avoidance to a mobile robot
- Building a 2D/3D indoor map
- Measuring distances for surveying
This product is ideal for robotics developers, autonomous vehicle engineers, and surveying professionals.
Technical Tip: LiDAR sensors use laser pulses to measure distance. Check scan rate (Hz), range (meters), and angular resolution for your application.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine Holybro product sourced from authorized channels
Rohit Nair (verified owner) –
Very satisfied with this Holybro ST VL53L1X Lidar. Library support is good and it’s easy to interface.
Anil Bhat (verified owner) –
Excellent Holybro ST VL53L1X Lidar! Readings are accurate and consistent. Perfect for my project.
Aanya Kamath (verified owner) –
Excellent Holybro ST VL53L1X Lidar! Readings are accurate and consistent. Perfect for my project.
Gauri Kulkarni (verified owner) –
Superb Holybro ST VL53L1X Lidar! Using it in my environmental monitoring system. Very reliable data.
Aryan Rathore (verified owner) –
Excellent sensitivity and range on this Holybro ST VL53L1X Lidar. Works better than I expected.
Anjali Bose (verified owner) –
Okay Holybro ST VL53L1X Lidar. Had to add a capacitor to stabilize readings. Works now.
Sakshi Mehta –
This Holybro ST VL53L1X Lidar is a must-have for sensor projects. Plug and play with Arduino.
Gauri Kohli (verified owner) –
This Holybro ST VL53L1X Lidar is excellent for the price. My data logging project is working perfectly now.
Farhan Ghosh (verified owner) –
Excellent sensitivity and range on this Holybro ST VL53L1X Lidar. Works better than I expected.
Mahesh Choudhury (verified owner) –
Bought this Holybro ST VL53L1X Lidar for my college project. Accurate readings, easy to code. Very happy!
Girish Kamath (verified owner) –
Love this Holybro ST VL53L1X Lidar. Response time is fast and readings are stable.
Harshit Sharma (verified owner) –
Excellent Holybro ST VL53L1X Lidar! Readings are accurate and consistent. Perfect for my project.