These compact and versatile WS2812B RGB addressable LED modules are less than a centimeter in diameter and can be connected in series to control each individual LED.
The WS2812B is a smart LED light source that combines both the RGB chip and control circuitry into a single 5050 package. It features an internal digital lock and a signal reshaping loop amplifier for seamless data transmission.
Additionally, the WS2812B includes a precision internal oscillator and a 12V constant voltage programmable current controller, ensuring consistent brightness and color accuracy across all pixels. The data transfer protocol utilizes a single-wire NZR communication mode.
When powered on, the DIN port receives data from the controller. The first pixel collects 24-bit data and sends it to its internal data latch. The rest of the data is then processed by the internal amplifier and passed along to the next pixel in the series via the DO port. With each transmission, the data reduces by 24 bits, but thanks to the auto reshaping transmission technology, the number of pixels in the cascade is only limited by the transmission speed, not signal loss.
These LEDs offer several advantages, including low voltage conduction, environmental friendliness, energy efficiency, high brightness, wide scattering angle, excellent color consistency, low power consumption, and long lifespan. The integrated control chip simplifies the circuit design, reduces the module’s size, and makes installation easier.
Features:
Intelligent reverse connects protection, the power supply reverse connection does not damage the IC.
The control circuit and the LED share the only power source.
Control circuit and RGB chip are integrated into a package of 5050 components, form a complete control of pixel point.
Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate.
Built-in electric reset circuit and power lost reset circuit.
Each pixel of the three primary colors can achieve 256 brightness levels, or 16M colors full-color display, and scan frequency not less than 400Hz/s.
Cascading port transmission signal by a single line.
Any two points the distance more than 5m transmission signal without any increase circuit.
When the refresh rate is 30fps, cascade number is not less than 1024 points.
Send data at speeds of 800Kbps.
The color of the light was highly consistent.
Full-color module, Full-color soft lights a lamp strip.
LED decorative lighting, Indoor/outdoor LED video irregular screen.
The WS2812B RGB Addressable LED Module-(Pack of 10) is a versatile rgb led strips and drivers used across a wide range of applications including electronics projects, DIY builds, prototyping, and educational experiments.
Common use cases:
Integrating into a custom electronics project
Learning and experimenting with circuits
Replacing or upgrading components in existing setups
This product is ideal for electronics enthusiasts, engineers, and students.
Technical Tip: Always verify voltage and current requirements before connecting to your circuit. Check datasheets for detailed specifications and pin configurations.
Shipping & Delivery
Free shipping on orders above ₹999 across India
Dispatched within 1-3 business days
Expected delivery: 3-7 business days depending on location
Secure packaging to ensure safe transit of electronic components
Weight
0.0 kg
15 Days Warranty
Please note that this item is only covered by a standard supplier warranty against manufacturing defects for a period of 15days from the time of delivery. It is important to understand that only manufacturing defects are covered under this warranty, and any other issues will not be considered for reimbursement or replacement. We strongly advise inspecting the product upon delivery to ensure it meets your expectations. In case of any manufacturing defects, we guarantee reimbursement or replacement.
What voids warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
