Product Description
The PDB-XT60 with BEC 5V and 12V Power Distribution Board is a high-performance and reliable device that fits in a 36x50mm, 4-layer
PCB. It has an XT60 connector for easy attachment to LiPo batteries.
It can distribute power from 3~4S LiPo packs to 6 ESCs and provide synchronized and regulated DC 5V outputs for RC Receivers, Flight controllers, OSD, and Servos.
It also has a linear regulated DC 12V output for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc. The LiPo pack can be conveniently connected to the XT60 socket.
The PDB-XT60 with BEC 5V and 12V is an ideal choice for powering your Racing Drones for racing.
Note:
Since this is an Open-Source Power Distribution Board, there are many manufacturers who are supplying this product. We have picked up the best quality products from the market and tested them for their functionality. And finally selected best amongst them. Our product works exactly same as we have described above in the description.
Features:
- 4-layers and 1.6mm PCB
- Built-in XT60 Socket
- Total 6 pairs ESC solder tabs are fit for H or X type frame.
- 5V and 12V Output LED indicators
- Regulated 5V and 12V outputs
- BEC 5V output: 5V/2A (Max.2.5A 10s/minute)
- Output Ripple: 40mV (VIn= 16V, VOut= 5V@2A load)
- Short-circuit tolerant: 5 seconds/minute.
- BEC 12V output (4S LiPoly, 13~18V DC): 12V/500mA (Max.0.8A 5s/minute)
- BEC 12V output (3S LiPoly): =3S LiPoly voltage – 1V
Specification:
Brand | Mateksys |
---|---|
Track Material | 2oz Copper |
Short Circuit Tolerant Voltage(V) | 9 to 18 |
Output Continuous Current | 25A @4 and 15A @6 |
Output Peak Current(for 10 seconds) | 30A @4 and 20A@6 |
Length (mm): | 36 |
Width (mm) | 50 |
Height (mm) | 4 |
Weight (g): | 11 |
Shipping Weight | 0.016 kg |
Shipping Dimensions | 6 × 8 × 2 cm |
Package includes:
1 x PDB-XT60 W/BEC 5V and 12V board
1 x XT60 male Connector