Rc Mini Micro 9g 1.6KG Servo SG90 for RC 250 450 Helicopter Airplane Car Boat
A servo is a specialized geared motor designed to rotate up to 180 degrees. Its position is controlled by electrical pulses sent from your UNO R3 board. These pulses determine the angle to which the servo should move. Typically, the servo has three wires: the brown wire is the ground (GND), which connects to the GND port on the UNO; the red wire is the power (5V), which connects to the 5V port; and the orange wire is the signal, which should be connected to digital pin #9 on the board.
Specification:
Universal for JR and FP connector § Cable length : 25cm
No load; Operating speed: 0.12 sec / 60 degree (4.8V), 0.10 sec / 60 degree (6.0V) § Stall torque (4.8V): 1.6kg/cm
Temperature : -30~60’C
Dead band width: 5us
Working voltage: 3.5~6V
PACKAGE INCLUDES
1 X KUONGSHUN Servo SG90 9g 180 Degree (china chip)
Reviews
There are no reviews yet.