BotStack BotWing F405 FC Solderless Design and BotDrive AM32 ESC 55 Amps

BotStack BotWing F405 FC Solderless Design and BotDrive AM32 ESC 55 Amps

Descripton:

The BotStack combo brings together the powerful BotWing F405 Flight Controller and the BotDrive AM32 55A 4-in-1 ESC—an ideal match for FPV racers, freestyle builds, and cinematic drones. The BotWing F405 features an STM32F405 MCU, high-precision ICM42688P gyro, onboard 32MB Blackbox, AT7456E OSD, and support for Betaflight, iNav, and Mission Planner. Its solderless design makes the build clean, quick, and beginner-friendly. With plug-and-play DJI Air Unit support, six UARTs, and flexible power pads, it offers unmatched integration options.

Paired with the 55A AM32 ESC, you get a robust 32-bit controller with AT32F421 MCU, 55A continuous rating per motor, DSHOT300/600 support, and built-in telemetry. Its 2S–6S LiPo support and compact 30.5×30.5mm mounting make it perfect for high-performance quads. Together, they deliver smooth flight response, powerful motor control, and effortless installation—making this combo a reliable foundation for modern FPV drones.

Features:

• Solderless  F405 Flight Controller: The small and compact faderless FPV flight controller makes your setup much more accessible and easy to perform.
• Advanced ESC: The AM32 ESC firmware is installed in this ESC to make the performance more smooth as well as save the energy.
• Completely compatible: It is possible to use this product with software such as Mission Planner, iNav, and Betaflight.
• Power is supported in a versatile manner: The onboard OSD and logging enable the use of 3–6S LiPo batteries.
• Ready to connect easily: GPS, LED stripes, DJI Air Unit, and other add-ons can be connected to you with no problem.
• Integrates the versatile, feature-packed F405 flight controller and a high-current AM32 ESC that provides a better throttle response, telemetry, and firmware tunability
• Excellent for pilots who want accuracy and the latest technology in their freestyle or power-hungry builds.

Specification:

Specifications:

BotWing F405 Flight Controller:

• MCU: STM32F405 32-bit high-speed processor
• Gyro: ICM42688P for stable flight performance
• Input Voltage: 3S–6S LiPo
• BEC Outputs: 5V & 9V
• Ports: Multiple UART + I2C + LED ports
• Receiver Support: SBUS / CRSF / ELRS / DSMX
• Onboard OSD: Betaflight OSD
• Blackbox: Built-in storage (Flash/SD based on model)
• Sensor Support: GPS / Compass via UART & I2C
• ESC Interface: 4-in-1 ESC connector (JST)

BotDrive AM32 4-in-1 ESC :

• Firmware: AM32 open-source ESC firmware
• Continuous Current: 55A per ESC
• Input Voltage: 3S–6S LiPo
• Built-in Current Sensor: Yes
• Power Output: VBAT only
• Telemetry Output: Supported
• ESC Protocols: DShot600 / DShot300 / PWM
• Protection: Over-current + over-temperature + short-circuit
• Mounting & Interface: 4-in-1 ESC connector for FC
• PWM Frequency: Adjustable up to high-frequency ranges

Package Includes:

1 x BotStack BotWing F405 FC and BotDrive AM32 4-in-1 ESC Combo Packaging List:   BotStack BotWing F405 Flight Controller Includes :

1 x BotWing F405 Flight Controller

10 x Connector Cable

6 x M3 Rubber Grommet

1 x Silicone USB Protector   BotDrive AM32 4-in-1 ESC Includes :

1 x BotDrive AM32 4-in-1 ESC

1 x 35V 1000uF Capacitor

4 x M3 Silicone Grommet

1 x XT60 Male Connector

1 x JST-SH 8pin cable

Related Articles:

GPS Return to Home: Setup on Betaflight and iNav

Table of Contents Understanding GPS Return to Home Key Components and Requirements Step-by-Step Setup Guide Configuration and Optimisation...

Read More →

FPV Motor Rewind: Repair Burnt Motors Instead of Replacing

FPV Motor Rewind: Repair Burnt Motors Instead of Replacing You are mid-session at your favourite flying field, the...

Read More →

3-Inch Toothpick FPV Drone Build: Ultra-Light Indoor Flier

3-Inch Toothpick FPV Drone Build: Ultra-Light Indoor Flier The 3-inch toothpick FPV drone is one of the most...

Read More →