MicoAir MG-902 (M9) GNSS GPS Module for UAV Drones
Description:
MicoAir MG-902 is a GPS module with a U-Blox M9 chip and a QMC5883L compass, offered at an affordable price. The M9 chip supports all L1 GNSS signals (GPS, GLONASS, Galileo, BeiDou) and can lock onto up to 32 satellites. Its biggest advantage is the high refresh rate of up to 25Hz. The GPS module features a 25x25x4mm patch antenna for strong signal reception.
The status of the GPS module is indicated by an LED. The blue LED is constantly lit when powered on and blinks once a 3D fix is acquired.
Features:
- MG-902 GNSS module integrates a u-blox 9th generation receiver chip – M9140 and the magnetic sensor – QMC5883L. It supports all L1 GNSS signals (GPS/GLONASS/Galieo/BeiDou) and can use up to 32 satellites simultaneously for navigation.
- The high-gain 25 x 25 x 4mm patch antenna provides the best performance.
- u-blox M9 receivers support concurrent reception of four GNSS.The high number of visible satellites allows the receiver to select the best signals. This maximizes the position accuracy, in particular under challenging conditions such as deep urban canyons.
- The M9 receiver also provides higher navigation rate and improved security features compared to previous u-blox GNSS generations.
- Built-in flash, parameters can still be saved when MG-902 lost power.
Specification:
- GNSS Receiver: U-BLOX M9 (M9140)
- Magnetic Compass: QMC5883L
- Antenna: 25x25x4mm
- GNSS System Support: GPS L1 /CA; GLONASS L10F; BeiDou B1L; Galileo E1B/C; QZSS L1 C/A/S; SBAS L1 C/A
- Concurrent: 4 (GPS/BeiDou/Galileo/GLONASS),
-
Max Navigation rate: 25Hz
-
Max satelite num: 32
- Input Voltage: 5V
- Current: 50mA
- GPS Output Interface: UART (3.3V LVTTL)
- Compass Interface: I2C
- UART Baudrate: 115200(default)
- Output Protocol: UBX-PVT(default)
- PPS LED: Blue (Solid ON after powering on, blinking(1Hz) when GNSS get 3D fix)
Package Include :
- 1x GPS module
- 1x Interconnect cable
Flight Controller Firmware Required
- INAV: >=5.0.0
- Betaflight: >=4.2.0
- Ardupilot: >=4.2.0
- PX4: >= 1.12.0
How to Fix Drone Oscillations: PID Tuning Troubleshooting
How to Fix Drone Oscillations: Complete PID Tuning Troubleshooting Guide Nothing is more frustrating than watching your drone...
Read More →
Comparing Agricultural Drone Frames: EFT vs DJI Agras Parts
Choosing the right agricultural drone frame is the foundation of any crop spraying operation, and the EFT comparison...
Read More →
Best FPV Drone Stores in India 2026
Finding the Right FPV Drone Store in India Building an FPV drone from scratch is one of the...
Read More →Technical Specifications
| Brand | MicoAir |
|---|---|
| Model | MG-902 |
| SKU | AI8334 |
| Weight | 0.0 kg |
| Availability | Out of Stock |
Applications & Use Cases
The MicoAir MG-902 (M9) GNSS GPS Module for UAV Drones is a versatile gps modules used across a wide range of applications including electronics projects, DIY builds, prototyping, and educational experiments.
Common use cases:
- Integrating into a custom electronics project
- Learning and experimenting with circuits
- Replacing or upgrading components in existing setups
This product is ideal for electronics enthusiasts, engineers, and students.
Technical Tip: Always verify voltage and current requirements before connecting to your circuit. Check datasheets for detailed specifications and pin configurations.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine MicoAir product sourced from authorized channels
Reviews
There are no reviews yet.