CUAV NEO 4 Nano Mini GNSS Module U-BLOX M10 GPS (Pack 2)
Description:
NEO 4 NANO is a micro satellite navigation receiver module. It features a highly integrated miniaturized design, integrating the u-blox M10 satellite receiver system and supporting concurrent reception of signals from four major positioning systems. It is equipped with a high-performance STM32H5 processor and an ST IIS2MDC electronic compass. It has accurate positioning and excellent anti-interference and environmental adaptability. It supports RGB full-color status indicators, adopts CAN bus protocol, and is widely applicable to various unmanned system devices.
NEO 4 NANO MINI GNSS MODULE Specification:
Basic Parameters |
|
| Receiver Type | u‑blox MIA‑M10Q |
| Processor | STM32H5 Arm® Cortex®‑M33 250 MHz |
| Electronic Compass | IIS2MDC |
| Frequency Band | GPS: L1 C/A GLONASS: L1OF BDS:B1I/B1C Galileo: E1B/C |
| Augmentation Systems | SBAS: EGNOS, GAGAN, MSAS, WAAS, BDSBAS, KASS, and SouthPAN QZSS: L1S (SLAS) |
| Number of Concurrent GNSS | 4 (BDS, Galileo, GLONASS, GPS) |
| Oscillator | TCXO |
| Acquisition | Cold Start 27s Hot Start 1s Aided Start 1s |
| Nav. Update Rate | Up to 10 Hz (4 concurrent GNSS) Up to 25 Hz (single GNSS) |
| Horizontal Position Accuracy | 1.5 m CEP |
| Wave Filtering | SAW+LNA+SAW+LNA |
| Anti Electromagnetic / Radio Frequency Interference | EMI+RFI |
| Protocol | DroneCAN |
| Upgrade Firmware | Support |
| Firmware | CUAV M4C GNSS |
Port Type |
|
| Data Interface | GHR‑04V‑S |
Hardware Parameters |
|
| Size | 34 × 20 × 14.5 mm |
| Weight | 10.6 g |
| Input Voltage | 4.5 ~ 5.4 V |
| Operating Temperature | -10 ~ +80 ℃ |
Compact & Lightweight Highly Integrated, Miniaturized Design
NEO 4 NANO innovatively adopts a highly integrated, miniaturized design with a precise internal structure and a compact overall appearance. Compared with conventional GPS positioning modules, its size is significantly reduced, with a weight of only 10.6 g. The compact body integrates complete positioning functions, easily meeting the strict space requirements of micro unmanned system devices, expanding application possibilities, and ushering in a new era of positioning.
u-blox M10 System Four GNSS Concurrent Reception
NEO 4 NANO supports simultaneous reception of signals from four major satellite navigation systems: BeiDou, Galileo, GLONASS, and GPS/QZSS. By intelligently selecting optimal satellite signals, NEO 4 NANO can significantly enhance positioning availability and stability in complex environments such as urban canyons.
Powerful Processor Self-Developed M4C Architecture Support
NEO 4 NANO is equipped with an STM32H5 processor, featuring a 250 MHz clock speed and an Arm® Cortex®-M33 core, which can deliver ample computing power. Combined with CUAV’s self-developed highly flexible M4C architecture software, it enables efficient customized development and upgrading.
High Anti-Interference Sensor Wide Dynamic Magnetic Field Detection
NEO 4 NANO features a built-in ST IIS2MDC sensor, with a magnetic field dynamic detection range of up to ±50 Gs and temperature offset compensation. It delivers outstanding performance in high dynamic range and strong magnetic interference resistance among similar products.
Accurate and Reliable | Dual SAW+LNA
NEO 4 NANO integrates TCXO and dual-channel LNA architecture, combined with RF filtering technology to build a high-performance active receiving antenna, which provides excellent receiving sensitivity and acquisition time, effectively improves signal quality, and ensures accurate and reliable positioning performance.
RGB Full-Color Status Indicator Light Controller Unlock Switch
Equipped with an 8-channel bus-controlled RGB light group, NEO 4 NANO is integrated with a built-in buzzer, delivering multi-level status indication effects. Through intelligent scene recognition, it can clearly indicate various working statuses of the controller, including unlock status, battery level, positioning status, and fault information.
DroneCAN Communication Protocol Compatible with Mainstream Open-Source Stacks
Adopting the DroneCAN protocol, NEO 4 NANO is fully compatible with mainstream open-source platforms such as ArduPilot and PX4, adapting to various unmanned system devices and having a wide range of application scenarios.
Pacakge Includes:
1x CUAV NEO 4 Nano Mini GNSS Module U-BLOX M10 GPS (Pack 2)
Drone Motor KV Rating Explained: How to Pick the Right Motor
Table of ContentsWhat is KV Rating in a Drone Motor?How KV Affects RPM and PerformanceLow KV vs High...
Read More →
Where to Buy Drone Parts in India: Complete Guide 2026
Whether you are building your first FPV racing quad or assembling a heavy-lift aerial photography rig, knowing where...
Read More →
Drone Insurance Requirements in India 2026
Understanding drone insurance requirements in India for 2026 is essential for every commercial drone operator. With DGCA mandating...
Read More →Technical Specifications
| Brand | Cuav |
|---|---|
| SKU | AI5047 |
| Weight | 0.0 kg |
| Availability | In Stock |
Applications & Use Cases
The CUAV NEO 4 Nano Mini GNSS Module U-BLOX M10 GPS (Pack 2) is a versatile flight controller & accessories used across a wide range of applications including autonomous drones, FPV racing quadcopters, agricultural drones, and surveying and mapping platforms.
Common use cases:
- Central brain for drone stabilization and navigation
- GPS waypoint missions for surveying
- Acro mode flying for FPV freestyle
This product is ideal for drone builders requiring precise flight control.
Technical Tip: F4 processors are good for basic builds; F7 or H7 recommended for advanced features. Ensure firmware compatibility (Betaflight, ArduPilot, iNAV).
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine Cuav product sourced from authorized channels
Reviews
There are no reviews yet.