3DR 100mW Radio Telemetry 915MHZ For APM PX4 Pixhawk

3DR 100mW Radio Telemetry 915MHZ For APM PX4 Pixhawk

Introducing the 915MHz 100mW Radio Telemetry Kit, based on the 3DR Telemetry kit and fully compatible with its firmware, which is completely open-source.

This telemetry kit is designed for use with Ardupilot or Pixhawk-based systems, enabling a seamless two-way telemetry connection between your drone and ground station.

Now featuring the new and improved V2 design, both the air and ground modules are interchangeable. Each module comes equipped with a USB connector and a DF13 connector for added convenience.

The wiring is fully integrated, and the independent housing enhances both safety and aesthetics. Data transmission is more stable, with no distinction between the air and ground units—the two modules are identical. Each module supports USB and includes a dual 6-pin TTL serial port design, allowing users to upgrade the firmware easily without the need for any additional tools.

Features

Small size and lightweight

CP2102 high-quality USB to TTL chips

915MHZ

Support MWC / APM / PX4 / Pixhawk other open-source flight control

MAVLink Framework Agreement

Open Source Firmware Frequency-hopping spread spectrum (FHSS)

2-way full-duplex communication adaptive TDM

Up to 25% can be corrected bit errors

Based on Si1000 and Si4432 wireless microcontroller modules.

Package Includes

1 x 3DR Radio Telemetry with the case and Tx and Rx Antenna.

2 x cables (APM/PIX).

2 x 3.5dbi antennas.

3DR 100mW Radio Telemetry 915MHZ For APM PX4 Pixhawk Overview

The 3DR 100mW Radio Telemetry 915MHz for APM PX4 Pixhawk is a compact, lightweight telemetry kit designed to establish a reliable two-way data link between Ardupilot or Pixhawk-based flight controllers and your ground station. It operates on the 915MHz band with 100mW output power, supporting open-source firmware for seamless integration.

Key Features of 3DR 100mW Radio Telemetry 915MHZ For APM PX4 Pixhawk

• 915MHz frequency with 100mW transmit power for clear line-of-sight telemetry
• Identical, interchangeable air and ground modules with V2 housing design
• Micro-USB port and DF13 connector for easy connection to PC and flight controller
• MAVLink protocol framing, status reporting and error correction up to 25% bit errors
• Configurable via Mission Planner and APM Planner using built-in USB interface
• Very small size and lightweight construction for minimal impact on UAV payload
• Fully integrated wiring and independent housing for improved durability
• Genuine product, fast shipping from Zbotic within 24 hours

Applications and Use Cases

• Real-time telemetry link for long-range drone flights and search operations
• Two-way data communication between Pixhawk/APM flight controllers and ground station
• Monitoring flight parameters during autonomous mapping and surveying missions
• Integration into custom UAV prototypes and robotics platforms for research
• FPV telemetry feed for status overlays on ground control screens
• Telemetry backup link for critical inspection or agricultural drone flights

How to Use 3DR 100mW Radio Telemetry 915MHZ For APM PX4 Pixhawk

Connect one module to your Pixhawk or APM telemetry port via the DF13 cable and mount the second module to your ground station PC using the micro-USB port. Open Mission Planner or APM Planner on your computer, select the COM port, set the matching baud rate and vehicle ID, then power on both modules to establish the telemetry link.

Why Buy from Zbotic?

• Genuine Products: All items sourced from authorized distributors
• Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
• Free Shipping: Free delivery on qualifying orders
• COD Available: Cash on Delivery, UPI, cards, net banking
• Technical Support: Expert help for setup and troubleshooting
• Easy Returns: Hassle-free replacement for defective products

Frequently Asked Questions

Can I use this telemetry kit with both APM and Pixhawk controllers?

Yes. The 3DR 915MHz telemetry kit is designed for full compatibility with Ardupilot and Pixhawk-based systems, using DF13 connectors for the telemetry port on either controller.

How do I configure the module settings?

Simply connect the module to your PC’s USB port, launch Mission Planner or APM Planner, choose the appropriate COM port, and adjust parameters such as baud rate, net ID and output power directly via the interface.

What level of error correction does this kit provide?

This telemetry system includes forward error correction capable of correcting up to 25% of bit errors, ensuring stable data transmission even in challenging RF environments.