This is the 28inch variant of the Waveshare 240×240 1.28inch Round LCD Display Module, 65K RGB in TFT LCD Displays. Available at ₹1,339.30 (₹1,135.00 + GST) with free shipping across India.
Looking for Waveshare 240×240 1.28inch Module? Waveshare 240×240 1.28inch Round LCD Display Module, 65K RGB is available at Zbotic with fast shipping across India.
Waveshare 240×240 1.28inch Round LCD Display
1.28″ ROUND LCD DISPLAY MODULE
Embedded GC9A01 Driver, Using SPI Bus
Comes with examples for Raspberry Pi, Arduino, STM32, etc.
Controlled Via SPI Bus
Supports Controller Boards Like Raspberry Pi/Jetson Nano/Arduino/STM32
Hardware Connection
Connecting With Raspberry Pi
Connecting With Arduino Board
Interface
- VCC – 3.3V / 5V power input
- GND – Ground
- DIN – SPI MOSI pin
- CLK – SPI SCK pin
- CS – SPI chip selection, low active
- DC – Data/Command selection (high for data, low for command)
- RST – External reset, low active
- BL – Backlight
Features:
- 240×240 resolution, 65K RGB colors, clear and colorful displaying effect
- SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32
- Comes with development resources (examples for Raspberry Pi/Arduino/STM32)
Specifications:
- Operating voltage: 3.3V / 5V
- Interface: 3-wire SPI, 4-wire SPI
- Display Panel: IPS
- Driver: GC9A01
- Resolution: 240 × 240 pixels
- Display Size: Φ32.4mm
- Pixel Size: 0.135 × 0.135mm
- Dimensions:40.4 × 37.5mm Φ37.5mm
Packages include:
1XWaveshare 240×240 1.28inch Round LCD Display Module, 65K RGB
Waveshare 240×240 1.28inch Round LCD Display Module, 65K Overview
The Waveshare 1.28″ Round LCD Display Module features a 240×240-pixel IPS panel driven by the embedded GC9A01 controller. Designed for compact projects, it delivers 65K RGB colors in a circular 32.4 mm format, ideal for wearable interfaces, round instrumentation and compact dashboards.
Key Features of Waveshare 240×240 1.28inch Round LCD Display Module, 65K
- 240×240 resolution on a Φ32.4 mm IPS round screen for crisp, vibrant visuals
- Embedded GC9A01 driver with support for both 3-wire and 4-wire SPI interfaces
- Dual voltage operation: accepts 3.3 V or 5 V supply for flexible integration
- Dedicated BL pin for backlight control, enabling PWM brightness adjustment
- Compatible with Raspberry Pi, Arduino, STM32, Jetson Nano and other SPI hosts
- Includes Arduino, Raspberry Pi and STM32 example code for rapid prototyping
- Fast shipping from Zbotic – get genuine Waveshare modules delivered across India
Applications and Use Cases
- Custom wearable devices and smartwatches with circular UI layouts
- Round instrument gauges for automotive dashboards and industrial controls
- Portable medical monitors displaying vital signs in compact form factors
- IoT control panels and handheld meters requiring a circular display
- Robotics status indicators with graphical icons and real-time feedback
- Educational electronics kits showcasing SPI-driven display projects
How to Use Waveshare 240×240 1.28inch Round LCD Display Module, 65K
Connect VCC to 3.3 V or 5 V and GND to ground, then wire DIN to MOSI, CLK to SCK, CS to a chip-select pin, DC to a data/command GPIO, RST to a reset GPIO and BL to a PWM-capable pin for backlight control. Install the provided Arduino, Raspberry Pi or STM32 library, adjust SPI settings to match 3-wire or 4-wire mode, and upload example sketches to initialize and draw graphics on the round LCD.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Can I power the display with both 3.3 V and 5 V?
Yes. The module’s VCC pin accepts either 3.3 V or 5 V input, allowing direct connection to most microcontrollers and single-board computers without additional level shifting.
Which controllers are supported for SPI communication?
This round LCD works over SPI with platforms like Raspberry Pi, Jetson Nano, Arduino and STM32. Simply connect the MOSI, SCK, CS, DC and RST pins and use the provided example libraries to begin drawing on the screen.
How do I adjust the backlight brightness?
The BL pin is designed for PWM control. Attach it to a PWM-capable GPIO on your host, vary the duty cycle to dim or brighten the backlight, and achieve smooth brightness transitions.
Arduino Sensor Shield: All-in-One Expansion Board Guide
Every Arduino beginner eventually faces the same frustration: you want to connect three sensors and an actuator, but...
Read More →
Arduino Batch Programming: Flash Multiple Boards Quickly
Table of ContentsIntroductionComponents and Hardware SetupWiring Diagram and ConnectionsComplete Code with ExplanationCustomization and ImprovementsTroubleshooting Common IssuesAdvanced Features and...
Read More →
Arduino Mega 2560 Projects: When You Need More Pins
Table of Contents Why Choose the Arduino Mega 2560? Specifications and Pin Layout Setup Guide: IDE Configuration and...
Read More →Technical Specifications
| Brand | WAVESHARE |
|---|---|
| Display Size | 1.28" |
| Resolution | 240x240 |
| Package Quantity | 240 pcs |
| SKU | AI6016 |
| Weight | 0.02 kg |
| Availability | In Stock |
Applications & Use Cases
The Waveshare 240×240 1.28inch Round LCD Display Module, 65K RGB is a versatile tft lcd displays used across a wide range of applications including embedded HMI interfaces, Raspberry Pi touchscreen projects, Arduino display projects, industrial control panels, and information kiosks.
Common use cases:
- Adding a touch display to a Raspberry Pi project
- Building a portable game console
- Creating a dashboard for sensor data
This product is ideal for embedded developers, IoT makers, and industrial engineers.
Technical Tip: Check interface type (SPI, I2C, HDMI, RGB) and driver IC compatibility with your development board. IPS panels offer better viewing angles than TN.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine WAVESHARE product sourced from authorized channels
Saurabh Choudhury (verified owner) –
This Waveshare 240×240 1.28inch Round LCD Display is perfect for beginners. Connected to my Arduino in minutes.
Chetan Vyas (verified owner) –
This Waveshare 240×240 1.28inch Round LCD Display is perfect for beginners. Connected to my Arduino in minutes.
Ayush Jain (verified owner) –
Good Waveshare 240×240 1.28inch Round LCD Display. Display works well. Viewing angle could be slightly better.
Deepak Pillai (verified owner) –
Nice Waveshare 240×240 1.28inch Round LCD Display. Readable and bright enough for indoor projects.
Mohit Tandon (verified owner) –
Good Waveshare 240×240 1.28inch Round LCD Display. Contrast is nice. Had to adjust potentiometer for optimal view.
Riya Pandey –
Decent quality Waveshare 240×240 1.28inch Round LCD Display. All pins working. Good for the price.
Deepak Dhawan (verified owner) –
This Waveshare 240×240 1.28inch Round LCD Display looks great in my project enclosure. Good viewing angles.
Isha Negi (verified owner) –
Good Waveshare 240×240 1.28inch Round LCD Display. Contrast is nice. Had to adjust potentiometer for optimal view.
Rohit Kulkarni (verified owner) –
This Waveshare 240×240 1.28inch Round LCD Display is crisp and readable even in sunlight. Great for outdoor projects.
Daksh Bhat (verified owner) –
Nice Waveshare 240×240 1.28inch Round LCD Display. Readable and bright enough for indoor projects.
Akash Dhillon (verified owner) –
Good Waveshare 240×240 1.28inch Round LCD Display. Contrast is nice. Had to adjust potentiometer for optimal view.