Looking for 433mhz Kit? 433Mhz 100mW Radio Telemetry Kit is available at Zbotic with fast shipping across India.
Product Description
This is 433Mhz 100mW Radio Telemetry V2 Kit is based on the 3DR Telemetry kit and is 100% compatible as it runs the same firmware onboard. This firmware used by 3D Robotics is completely open-source which is, of course, the reason we are able to use it on our own version at Unmanned Tech.
The Unmanned Telemetry Kit is compatible with Ardupilot or Pixhawk-based systems and allows you to easily add a two-way telemetry connection between your drone and ground station. This product comes with our full support and warranty as we are confident in the functionality and reliability of this item.
This is the new and improved V2 of the Unmanned Telemetry kit. The full features and specifications are listed below but the main features are that both air and ground module are now interchangeable, and each is with a USB connector and a DF13 connector. Please note that to connect to Pixhawk, it is a good idea to also purchase a 6-pos to 6-pos cable as this is easier and better than using the cable included.
Note: Product image may change in terms of design.
- This telemetry only could use with APM compatible control board.
- As we have some variations in the color of connecting cable, we will be shipping it randomly to our customers.
Features :
- Very small size & Lightweight (under 4 grams without antenna)
- Transparent serial link
- MAVLink protocol framing and status reporting
- Frequency hopping spread spectrum (FHSS)
- Adaptive time division multiplexing (TDM)
- Support for LBT and AFA
- Configurable duty cycle
- Interchangeable air and ground modules
- Micro-USB port
- 6-position DF13 connector
- 100 mW maximum output power (adjustable)
- Based on HopeRF’s HM-TRP module
- RP-SMA connector
- 2-way full-duplex communication through adaptive TDM
- UART interface
- Transparent serial link
- MAVLink protocol framing
- Frequency Hopping Spread Spectrum (FHSS)
- Configurable duty cycle
- Error correction corrects up to 25% of bit errors
- Configurable through Mission Planner and APM Planner
- Built-in error correcting code (can correct up to 25% data bit errors)
- The demonstrated range of several kilometers with a small Omni antenna
- Can be used with a bi-directional amplifier for even more range
- AT commands for radio configuration
- RT commands for remote radio configuration
- Adaptive flow control when used with APM
- Based on the HopeRF HM-TRP radio module, featuring a SiLabs Si1000 RF microcontroller.
Package Includes :
This 433mhz Kit is a popular choice among hobbyists and professionals. The 433mhz Kit offers reliable performance for your projects.
About 433mhz Kit
433Mhz 100mW Radio Telemetry Kit is available at Zbotic, India’s trusted electronics and robotics store. Manufactured by Generic, this product is designed for hobbyists, students, and professionals working on electronics, robotics, and DIY projects.
Product Details
- Brand: Generic
- SKU: AI1508
- Category: FPV Antennas and Trans-Receivers
Why Buy from Zbotic?
Zbotic offers a wide range of electronics components, development boards, sensors, and robotics parts. All products are quality-checked and shipped within 24 hours. Free shipping on qualifying orders. We offer COD (Cash on Delivery) and secure online payment options. Our customer support team is available to help with technical queries about 433mhz Kit and other products.
Applications
433mhz Kit can be used in a variety of projects including Arduino projects, Raspberry Pi builds, drone assembly, 3D printing, IoT applications, and educational experiments. Whether you are a beginner or an advanced user, this component provides the reliability and performance you need. Order your 433mhz Kit today and start building.
433Mhz 100mW Radio Telemetry Kit Overview
The 433Mhz 100mW Radio Telemetry Kit V2 provides a two-way wireless data link for drones, robotics and telemetry applications. Running the same open-source firmware as the 3DR Telemetry V2, it offers seamless MAVLink communication with ArduPilot and Pixhawk systems over ranges up to 1.6 km.
Key Features of 433Mhz 100mW Radio Telemetry Kit
- 433 MHz frequency with 100 mW RF output and up to 250 kbps air data rate
- MAVLink protocol framing and status reporting for ArduPilot/Pixhawk integration
- FHSS (Frequency Hopping) and adaptive TDM for robust, interference-resistant links
- Supports Listen Before Talk (LBT) and Adaptive Frequency Agility (AFA)
- Based on HopeRF HM-TRP module with SiLabs Si1000 RF microcontroller and featuring a Micro-USB port for configuration and firmware updates
- Fast shipping across India from Zbotic with full product warranty
Applications and Use Cases
- Two-way telemetry for ArduPilot/Pixhawk quadcopters and fixed-wing UAVs
- Remote data link for agricultural drones monitoring crop health
- Ground station communication for search-and-rescue or survey missions
- Telemetry feed for high-altitude balloon experiments and environmental sensing
- Wireless control and diagnostics for robotics and remote-controlled vehicles
How to Use 433Mhz 100mW Radio Telemetry Kit
Connect one module to your flight controller’s telemetry port and the other to your ground computer via a USB adapter. Install the required drivers, then use ground-station software (e.g., Mission Planner) to set network IDs, RF power and data rate. Power both ends, and the FHSS/TDM link will automatically establish a reliable two-way MAVLink connection.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Is the 433 MHz 100 mW kit compatible with existing 3DR Telemetry modules?
Yes. This V2 kit runs the same open-source firmware used by 3D Robotics and is 100% compatible with 3DR Telemetry radios, allowing you to mix and match modules seamlessly.
Which ground station software can I use?
The kit uses the MAVLink protocol and works out of the box with Mission Planner, QGroundControl and any other software supporting MAVLink framing and status reporting.
What range can I expect in open-field conditions?
In clear line-of-sight scenarios, you can achieve up to approximately 1 mile (1.6 km) of reliable two-way telemetry communication.
Technical Specifications
| Frequency | 433Mhz |
|---|---|
| SKU | AI1508 |
| Availability | Out of Stock |
Applications & Use Cases
The 433Mhz 100mW Radio Telemetry Kit is a versatile fpv antennas and trans-receivers used across a wide range of applications including electronics projects, DIY builds, prototyping, and educational experiments.
Common use cases:
- Integrating into a custom electronics project
- Learning and experimenting with circuits
- Replacing or upgrading components in existing setups
This product is ideal for electronics enthusiasts, engineers, and students.
Technical Tip: Always verify voltage and current requirements before connecting to your circuit. Check datasheets for detailed specifications and pin configurations.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
