Pressure Transducer Transmitter Sensor G1/4 0.2MPa Stainless Steel
- If you’re developing a device that converts mechanical pressure into electrical signals, this sensor is indispensable. Found in altimeters, barometers, ink level sensors for printers, airflow monitors in equipment, IT server cooling systems, semiconductor processing tools, and laser measurement devices, this Pressure Transducer from Zbotic is a must-have.
- Crafted from high-quality stainless steel for durability, it features a standard G1/4 inch thread size and functions reliably in both air and water environments. Operating at 5VDC, it provides a digital output ranging from 0.5V to 4.5V. Known for its stable performance and long lifespan, this sensor ensures consistent and accurate pressure measurements across various applications.
Applications:
- Pressure Detection in Oil Tank, Gas Tank.
The interface of Pressure Transducer with Arduino:
Source Code for Pressure Transducer Sensor:
/************************************************************
Water pressure sensor demo(Computer serial port)
- Obtain the water pressure through the output voltage
of the sensor.
**************************************************************/
/************************************************************
Water Sensor Key Parameter
- Parts No.:KY-3-5
- Sensing range: 0 - 1.6 MPa
- Input Voltage: 5VDC
- Output Voltage: 0.5 - 4.5 VDC
(Linearly corresponding to 0 - 1.6 MPa)
- Accuary: 0.5% - 1% FS
**************************************************************/
/************************************************************
Water Sensor Calibration
The output voltage offset of the sensor is 0.5V (norminal).
However, due to the zero-drifting of the internal circuit, the
no-load output voltage is not exactly 0.5V. Calibration needs to
be carried out as follow.
Calibration: connect the 3 pin wire to the Arduio UNO (VCC, GND and Signal)
without connecting the sensor to the water pipe and run the program
for once. Mark down the LOWEST voltage value through the serial
monitor and revise the "OffSet" value to complete the calibration.
After the calibration the sensor is ready for measuring!
**************************************************************/
const float OffSet = 0.483 ;
float V, P;
void setup()
{
Serial.begin(9600); // open serial port, set the baud rate to 9600 bps
Serial.println("/** Water pressure sensor demo **/");
}
void loop()
{
//Connect sensor to Analog 0
V = analogRead(0) * 5.00 / 1024; //Sensor output voltage
P = (V - OffSet) * 400; //Calculate water pressure
Serial.print("Voltage:");
Serial.print(V, 3);
Serial.println("V");
Serial.print(" Pressure:");
Serial.print(P, 1);
Serial.println(" KPa");
Serial.println();
delay(500);
}
- Adopt Precision Compensation Technology and Sensitive Components, Stable and Reliable.
- 0.1% FS Small Output Error, Including Nonlinear, Hysteresis Error, and Repeatability.
- Light Weight and Small Volume, Easy to Install, and Operate.
- Stainless Steel Body has a Complete Surge Voltage Protection Function.
Specification:
- Operating Voltage:5 V
- Output Voltage:0.5~4.5 V
- Accuracy:1% FS
- Thread Size:G 1/4”
Package Includes:
- 1 x 0.2MPa Stainless Steel Pressure Transducer Sensor
pH Sensor Module for Arduino: Buying Guide & Calibration
Table of Contents Introduction Understanding pH and Why It Matters How a pH Sensor Module Works Popular pH...
Read More →
Temperature Sensors and Applications
The global temperature sensor market size is projected to grow from USD 6.3 billion in 2020 to USD 8.8 billion...
Read More →
Bidirectional Level Shifter: Interface 5V and 3.3V Sensors
One of the most common wiring headaches in electronics projects is the voltage mismatch between 5V microcontrollers (Arduino...
Read More →Technical Specifications
| SKU | AI1196 |
|---|---|
| Weight | 0.07 kg |
| Availability | In Stock |
Applications & Use Cases
The Pressure Transducer Transmitter Sensor G1/4 0.2MPa Stainless Steel is a versatile water tds, ph, flow, level and pressure sensor used across a wide range of applications including water quality monitoring, hydroponics, aquariums, industrial water treatment, and smart irrigation.
Common use cases:
- Measuring TDS in a hydroponic nutrient solution
- Monitoring pH in an aquarium
- Tracking water flow in an irrigation system
This product is ideal for aquaculture professionals, hydroponic growers, and environmental engineers.
Technical Tip: Calibrate pH and TDS sensors regularly with standard solutions. Keep probe tips clean and submerged when not in use.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Rahul Singh –
Love this Pressure Transducer Transmitter Sensor G1/4 0.2MPa. Response time is fast and readings are stable.
Sahil Modi (verified owner) –
Perfect for my weather station. This Pressure Transducer Transmitter Sensor G1/4 0.2MPa gives consistent readings day and night.
Kiara Panchal (verified owner) –
Very satisfied with this Pressure Transducer Transmitter Sensor G1/4 0.2MPa. Library support is good and it’s easy to interface.
Nikita Agarwal (verified owner) –
Bought this Pressure Transducer Transmitter Sensor G1/4 0.2MPa for my college project. Accurate readings, easy to code. Very happy!
Raj Dave (verified owner) –
Decent Pressure Transducer Transmitter Sensor G1/4 0.2MPa for the price. Requires proper wiring but works well once set up.
Lakshya Kulkarni (verified owner) –
Good quality Pressure Transducer Transmitter Sensor G1/4 0.2MPa. Some variation in readings but within acceptable range.
Saurabh Patel –
Superb Pressure Transducer Transmitter Sensor G1/4 0.2MPa! Using it in my environmental monitoring system. Very reliable data.
Harsh Panchal (verified owner) –
Superb Pressure Transducer Transmitter Sensor G1/4 0.2MPa! Using it in my environmental monitoring system. Very reliable data.
Ishan Deshpande (verified owner) –
Great quality Pressure Transducer Transmitter Sensor G1/4 0.2MPa. Calibrated it easily and the accuracy is impressive.
Pranav Saini (verified owner) –
Outstanding accuracy from this Pressure Transducer Transmitter Sensor G1/4 0.2MPa. Compared with a professional instrument, readings match closely.
Nakul Verma –
Great Pressure Transducer Transmitter Sensor G1/4 0.2MPa. Using it in my smart agriculture system. Reliable measurements every time.
Shreyas Dubey –
Perfect for my weather station. This Pressure Transducer Transmitter Sensor G1/4 0.2MPa gives consistent readings day and night.
Sarika Mishra (verified owner) –
Good quality Pressure Transducer Transmitter Sensor G1/4 0.2MPa. Some variation in readings but within acceptable range.
Vaishali Patil (verified owner) –
Bought this Pressure Transducer Transmitter Sensor G1/4 0.2MPa for my college project. Accurate readings, easy to code. Very happy!
Om Mukherjee (verified owner) –
Superb Pressure Transducer Transmitter Sensor G1/4 0.2MPa! Using it in my environmental monitoring system. Very reliable data.
Tanya Verma (verified owner) –
Perfect for my weather station. This Pressure Transducer Transmitter Sensor G1/4 0.2MPa gives consistent readings day and night.
Tarun Rawat (verified owner) –
Perfect for my weather station. This Pressure Transducer Transmitter Sensor G1/4 0.2MPa gives consistent readings day and night.
Aditi Kulkarni (verified owner) –
Perfect for my weather station. This Pressure Transducer Transmitter Sensor G1/4 0.2MPa gives consistent readings day and night.