XBee PRO S2C SMD (U.FL Antenna) Module

Looking for Xbee Module? XBee PRO S2C SMD (U.FL Antenna) Module is available at Zbotic with fast shipping across India.

XBee PRO S2C SMD (U.FL Antenna) Module

DigiKey introduces a new board that offers wireless connectivity to ZigBee mesh networks with XBee ZB embedded SMT RF modules. These modules are ready to use and do not require any configuration or development. Users can set up their network quickly and easily.

The programmable versions of the SMT module enable users to customize their ZigBee applications without needing wireless design skills. They also support features like binding and multicasting, which facilitate the integration with Home Automation devices.

Applications:

1. Home Automation
2. Wireless Sensor Networks
3. Industrial Control Systems
4. Embedded Sensing
5. Medical Data Collection

Features

1.  Interoperability with ZigBee devices from other vendors
2. Firmware upgrades via UART, SPI, or over the air
3. Supports binding and multicasting, for easy integration into a Home Automation platform
4. SMT form factor with side Castellations for easy soldering
5. Programmable ZigBee SMT available

Specifications:

Package Includes

• 1 x XBee PRO S2C SMD (U.FL Antenna) Module

XBee PRO S2C SMD (U.FL Antenna) Module Overview

The XBee PRO S2C SMD (U.FL Antenna) Module is a surface-mount ZigBee RF transceiver designed for embedded wireless networking. It provides reliable mesh connectivity using the ZigBee PRO 2007 protocol and connects via UART or SPI to microcontrollers and host devices.

Key Features of XBee PRO S2C SMD (U.FL Antenna) Module

• Compliant with ZigBee PRO 2007 protocol for robust mesh networking
• Dual serial interfaces: UART and SPI for flexible host communication
• Four 10-bit ADC inputs for analog sensor integration
• 15 configurable digital I/O ports for control and monitoring
• U.FL antenna connector allows external 2.4 GHz antenna selection
• SMT form factor ready for volume PCB assembly
• Genuine product with fast shipping from Zbotic across India

Applications and Use Cases

• Home automation: wireless lighting, security sensors and smart switches
• Wireless sensor networks for temperature, humidity or asset tracking
• Industrial control systems: machine status monitoring and remote I/O
• Embedded sensing: portable data loggers and wearable devices
• Mesh network backhaul for smart agriculture and environmental monitoring

How to Use XBee PRO S2C SMD (U.FL Antenna) Module

Solder the SMD module onto a compatible carrier board or custom PCB footprint, attach a 2.4 GHz antenna via the U.FL connector, and apply a regulated 3.3 V supply. Connect the UART or SPI signals to your microcontroller, configure network parameters using Digi’s configuration software, then integrate into your ZigBee mesh for data transmission.

Why Buy from Zbotic?

• Genuine Products: All items sourced from authorized distributors
• Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
• Free Shipping: Free delivery on qualifying orders
• COD Available: Cash on Delivery, UPI, cards, net banking
• Technical Support: Expert help for setup and troubleshooting
• Easy Returns: Hassle-free replacement for defective products

Frequently Asked Questions

How do I interface the XBee PRO S2C SMD module with a microcontroller?

Use the module’s UART or SPI pins to connect TX/RX or MOSI/MISO/SCLK lines to your MCU’s serial interface. Supply 3.3 V and configure baud rate and API mode via Digi’s configuration utility for transparent or API communication.

Can I use a different antenna with the U.FL connector?

Yes, the U.FL port lets you attach any compatible 2.4 GHz antenna—such as whip, patch, or high-gain options—to optimize range and orientation for your application.

Is the SMD module suitable for custom PCB designs?

Absolutely. The XBee PRO S2C SMD module follows a standard SMT footprint, allowing direct soldering onto your custom PCB for volume production without additional mounting hardware.