Name: Original Emax SimonK Series Multirotor 30A Brushless ESC (Original)
Brand: Emax
SKU: AI7132
Price: 1754.55 INR
Availability: InStock
Rating: 4.60 (10 reviews)

Looking for 30a Esc Emax? Original Emax SimonK Series Multirotor 30A Brushless ESC (Original) is available at Zbotic with fast shipping across India.

30a Esc Emax – Original Emax SimonK Series Multirotor 30A Brushless ESC (Original)

Description:

Emax SimonK Series Multirotor 30A Brushless ESC (Original) is a brushless dc motor speed controller. The low output resistance greatly enhances power stability, and this will improve the great battery life. Emax SimonK Series Multirotor 30A Brushless ESC is programmed to start the brushless dc motor. This ESC has a greater current handling capacity which is 30A continuous and the peak current is 40A for the last 10 seconds only.

100% Guaranteed of Original & Genuine Emax Product

EMAX User Instruction for SimonK series ESC

Simon Series

Features:

Based on SimonK firmware, further optimized to the perfect drive performance.
Low-voltage protection, over-heat protection, and throttle signal loss protection.
Separate power supply for MCU and BEC, enhancing the ESC’s ability to eliminate magnetic interference.
Parameters of the ESC can be set via a program card or transmitter.
Throttle range can be set to be compatible with different receivers.
Equipped with built-in linear BEC or switch BEC.
Max speed: 210,000 rpm for 2-pole, 70,000 rpm for 6-pole, 35,000 rpm for 12-pole.

Specification:

Item Type	Brushless ESC
Model Name	Emax SimonK Series 30A
Burst Current (A)	40
Constant Current (A)	30
BEC (Y/N)	(5V/2A), Yes
Compatible LiPO Batteries	2S to 3S
Color	Black and Red
Dimensions (L x W x H) mm	55 x 28 x 7
Weight (g)	28
Application	BLDC Motors, Multirotors, RC Planes etc.

Package Includes :

1x Emax SimonK Series Multirotor 30A Brushless ESC module.

Original Emax SimonK Series Multirotor 30A Brushless ESC Overview

The Original Emax SimonK Series Multirotor 30A Brushless ESC is a compact speed controller designed for 2–3S LiPo-powered multirotor aircraft. It regulates motor power with SimonK firmware for smooth throttle response and reliable flight performance.

Key Features of Original Emax SimonK Series Multirotor 30A Brushless ESC

Supports 2S–3S LiPo input for a wide range of multirotor setups
30A continuous current and 40A burst current (10 seconds) for reliable power delivery
Linear 5V/1A BEC output to power flight controllers and onboard electronics
SimonK firmware optimized for fast throttle response and precise motor control
Low output resistance enhances power stability and extends battery life
100% genuine Emax product with fast shipping from Zbotic

Applications and Use Cases

FPV racing quadcopters requiring high throttle accuracy and quick response
Camera drones for stable aerial photography and videography
Hexacopter and octocopter builds demanding reliable current handling
Educational robotics projects featuring brushless motor control
DIY multirotor prototypes where lightweight ESCs are essential

How to Use Original Emax SimonK Series Multirotor 30A Brushless ESC

Begin by soldering the three motor phase wires to the ESC and connecting the LiPo power leads to your power distribution board or battery connector. Plug the ESC’s signal wire into your flight controller’s throttle output and power on the system to perform a throttle range calibration. After confirming correct motor rotation, you can fine-tune parameters using a SimonK programming tool or card.

Why Buy from Zbotic?

Genuine Products: All items sourced from authorized distributors
Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
Free Shipping: Free delivery on qualifying orders
COD Available: Cash on Delivery, UPI, cards, net banking
Technical Support: Expert help for setup and troubleshooting
Easy Returns: Hassle-free replacement for defective products

Frequently Asked Questions

What battery voltage range does this ESC support?

This ESC accepts 2S to 3S LiPo batteries, providing a voltage range of approximately 7.4V to 11.1V for multirotor use.

What are the continuous and burst current ratings?

The Emax SimonK 30A ESC delivers 30A continuous current and can handle a peak burst current of 40A for up to 10 seconds.

Does this ESC include a built-in BEC, and what is its output?

Yes, it features a linear BEC that outputs 5V at 1A, suitable for powering receivers and small flight controllers.

Tags: 30A ESCs Buy Online India Drone Emax Emax Simon K ESC Speed Controller Zbotic

Technical Specifications

Brand	Emax
Current Rating	30A
SKU	AI7132
Weight	0.0455 kg
Availability	In Stock

Applications & Use Cases

The Original Emax SimonK Series Multirotor 30A Brushless ESC (Original) is a versatile (esc) drone speed controller used across a wide range of applications including brushless motor speed control, FPV drone builds, multirotor platforms, and RC aircraft.

Common use cases:

Controlling motor speed in a quadcopter
Replacing a burnt ESC after a short
Upgrading to BLHeli_32 for smoother throttle response

This product is ideal for drone builders and RC enthusiasts.

Technical Tip: Choose ESC amperage 20% above your motor's max draw. DShot600 protocol recommended for modern builds.

Shipping & Delivery

Free shipping on orders above ₹999 across India
Dispatched within 1-3 business days
Expected delivery: 3-7 business days depending on location
Secure packaging to ensure safe transit of electronic components
Genuine Emax product sourced from authorized channels

Weight	0.0455 kg

15 Days Warranty

Please note that this item is only covered by a standard supplier warranty against manufacturing defects for a period of 15days from the time of delivery. It is important to understand that only manufacturing defects are covered under this warranty, and any other issues will not be considered for reimbursement or replacement. We strongly advise inspecting the product upon delivery to ensure it meets your expectations. In case of any manufacturing defects, we guarantee reimbursement or replacement.