Looking for Tekko32 Esc 60a? Holybro Tekko32 F4 4in1 60A ESC is available at Zbotic with fast shipping across India.
The Tekko32 F4 4in1 60A ESC is a high-performance electronic speed controller designed for compactness with a 30×30 mounting pattern, supporting 3-6S LiPo batteries. It features new high-quality MOSFETs with low internal resistance and minimal heat generation, ensuring efficient power delivery and a smooth flight experience. The ESC can sustain a continuous current of 60A and includes separate drive and control circuits to enhance the drive circuit’s current capacity while minimizing electrical interference in the control circuit. Equipped with the advanced BLHeli_32 firmware and a 96K PWM frequency, it provides rapid response times and superior motor control.
Features:
- All new High-quality MOSFETs with low internal resistance and low heat generation
- Fast F4 MCU @150MHz (compared to F3 @108MHz & F0 @48MHz)
- A separate drive and control circuit, reducing the electrical interference
- Continuous Current Rating of 60 Amps
- Supports DShot 150/300/600/1200/2400
- Supports MultiShot/OneShot/Proshot/PWM etc.
- ESC telemetry Supported
- Onboard analog current sensor
- BLHeli_32 firmware
- 1000uf 35v capacitor included (highly recommended for 6s setup)
- Amperage meter scale ratio: 120
specification
| Continuous Current (A) | 60A x 4 |
|---|---|
| Burst Current (A) | 70A x4 |
| Battery support | 4-6 S |
| PWM Frequency (Hz) | 16 to 19 |
| Dimensions (L x W x H) mm | 48 x 37 x 6 |
Package Includes:
1x Tekko32 F4 4in1 60A ESC
4x M3 Anti-Vibration Silicone Grommet Insert
1x Electrolytic capacitor: 1000uF 35v
1x 8pin to 8pin 1mm pitch 65mm cable
1x 8pin to 8pin 1mm pitch 25mm cable
Holybro Tekko32 F4 4in1 60A ESC Overview
The Holybro Tekko32 F4 4in1 60A ESC is a high-performance electronic speed controller designed for 5″ and similar-size FPV drone builds. It consolidates four ESC channels into a single 30×30 mm board, delivering smooth power delivery and precise motor control for aggressive racing and freestyle flying.
Key Features of Holybro Tekko32 F4 4in1 60A ESC
- Continuous 60 A current rating per channel for sustained high thrust
- High-quality MOSFETs with low internal resistance to minimize heat and voltage drop
- Separate drive and control circuits to reduce electrical noise and improve reliability
- BLHeli_32 firmware and up to 96 kHz PWM frequency for rapid throttle response
- Integrated capacitor banks for voltage stability and transient protection
- Onboard current sensing (amperage meter ratio) for real-time telemetry feedback
- Fast shipping from Zbotic — get your ESC delivered across India quickly
Applications and Use Cases
- 5″ racing multirotors requiring high continuous current output
- Freestyle FPV builds where compact 4-in-1 integration saves space
- Long-range drones that demand efficient power delivery on 6S setups
- Cinematic platforms needing smooth throttle transitions and minimal noise
- Custom quadcopters with 30×30 mm standoff mounting patterns
- Advanced DIY builds where telemetry data enhances in-flight monitoring
How to Use Holybro Tekko32 F4 4in1 60A ESC
Mount the ESC onto a 30×30 mm standoff stack, solder the motor leads and battery input (3–6S LiPo), then connect signal wires to your flight controller. Flash or configure BLHeli_32 firmware via USB or your FC’s passthrough, calibrate throttle endpoints, set PWM frequency, and enable current sensor parameters. Secure all connections and perform a bench test before maiden flight.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
What battery voltage does the Tekko32 F4 4in1 support?
This ESC supports 3S to 6S LiPo batteries, making it ideal for a wide range of 5″ and similar drone configurations.
Is the current sensor calibrated out of the box?
Yes, the onboard amperage meter ratio is preset for accurate telemetry, but you can fine-tune the calibration using BLHeli_32 or your flight controller’s OSD settings.
Can I update the firmware after installation?
Absolutely—simply connect the ESC to your PC via USB adapter or use your flight controller’s passthrough feature to flash the latest BLHeli_32 firmware and adjust settings.
ExpressLRS (ELRS) Setup Guide: From Flashing to First Bind
ExpressLRS (ELRS) Setup Guide: From Flashing to First Bind ExpressLRS has taken the FPV drone community by storm...
Read More →
Drone Delivery System: Payload Release Mechanism
Table of Contents Understanding Drone Delivery System Key Components and Requirements Step-by-Step Setup Guide Configuration and Optimisation Practical...
Read More →
Best LiPo Batteries for Drones: Capacity and C-Rating Explained
Choosing the right lipo battery for drone builds is one of the most critical decisions you will make...
Read More →Technical Specifications
| Brand | Holybro |
|---|---|
| Current Rating | 60A |
| SKU | AI6037 |
| Availability | Out of Stock |
Applications & Use Cases
The Holybro Tekko32 F4 4in1 60A ESC is a versatile flight controller & accessories used across a wide range of applications including autonomous drones, FPV racing quadcopters, agricultural drones, and surveying and mapping platforms.
Common use cases:
- Central brain for drone stabilization and navigation
- GPS waypoint missions for surveying
- Acro mode flying for FPV freestyle
This product is ideal for drone builders requiring precise flight control.
Technical Tip: F4 processors are good for basic builds; F7 or H7 recommended for advanced features. Ensure firmware compatibility (Betaflight, ArduPilot, iNAV).
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine Holybro product sourced from authorized channels
Chetan Khurana (verified owner) –
My 5th order from Zbotic. This Holybro Tekko32 F4 4in1 60A ESC is excellent as always. Totally reliable store.
Riya Dave (verified owner) –
Outstanding Holybro Tekko32 F4 4in1 60A ESC! Installed it on my racing quad and the performance is amazing.
Darshan Bisht (verified owner) –
Amazing build quality! This Holybro Tekko32 F4 4in1 60A ESC is sturdy and lightweight at the same time.
Milan Mittal –
Excellent Holybro Tekko32 F4 4in1 60A ESC! Perfect for my quadcopter build. Arrived well packed and works flawlessly.
Kartik Grewal (verified owner) –
Pretty good Holybro Tekko32 F4 4in1 60A ESC. Works as expected for my drone project. Would buy again.
Neeraj Bisht –
Pretty good Holybro Tekko32 F4 4in1 60A ESC. Works as expected for my drone project. Would buy again.
Swati Saxena (verified owner) –
Using this Holybro Tekko32 F4 4in1 60A ESC in my FPV drone build. Quality is top notch. Very happy with the purchase.
Priya Singh (verified owner) –
Excellent Holybro Tekko32 F4 4in1 60A ESC! Perfect for my quadcopter build. Arrived well packed and works flawlessly.
Ojas Patil (verified owner) –
Outstanding Holybro Tekko32 F4 4in1 60A ESC! Installed it on my racing quad and the performance is amazing.
Sandeep Bhat –
Amazing build quality! This Holybro Tekko32 F4 4in1 60A ESC is sturdy and lightweight at the same time.