Looking for M10 Case? Holybro Micro M10 GPS With Case is available at Zbotic with fast shipping across India.
The Holybro Micro M10 GPS with Case is equipped with a multi-constellation GNSS, powered by the u-blox M10 concurrent GNSS receiver, capable of receiving and tracking various GNSS systems simultaneously. Thanks to its multi-band RF front-end architecture, it can concurrently receive signals from all four primary GNSS constellations: GPS, Galileo, GLONASS, and BeiDou. Additionally, it includes the IST8310 compass.
Its high-gain 25 x 25 mm² patch antenna delivers superior performance, and its omnidirectional radiation pattern offers increased installation flexibility. The device also boasts active circuitry for the ceramic patch antenna and a rechargeable backup battery to facilitate warm starts.
For firmware support, the M10 GPS requires PX4 1.14, ArduPilot 4.3, INAV 5.0.0, Betaflight 4.3.0, or newer versions.
Features:
- The newest Ublox 10th Gen GNSS
- Fast & Accurate Positioning
- IST8310 Compass
- Small Form Factor
specification
| GNSS Receiver | Ublox M10 |
|---|---|
| Number of Concurrent GNSS | Up to 4 GNSS – BeiDou – Galileo – GLONASS – GPS – QZSS |
| Frequency Band | – GPS L1 – Galileo E1 – GLONASS L1 – BeiDou B1 – SBAS L1 – QZSS L1 |
| Compass | IST8310 |
| Output Protocol | – UBX (U-blox) – NMEA |
| Accuracy | 2.0m CEP |
| Nav. Update Rate | Up to 25 Hz (single GNSS), Up to 10 Hz (4 concurrent GNSS) |
| GNSS Augmentation System | EGNOS, GAGAN, MSAS and WAAS QZSS: L1S |
| Default Baud Rate | 115200 |
| Input Voltage | 4.7-5.2V |
| Port Type | JST-GH-6P |
| Antenna | 25 x 25 x 4 mm ceramic patch antenna |
| Power consumption | Less than 200mA @ 5V |
| Operating Temperature | -40~80C |
| Dimension | – 32 x 26 x 9mm (w/o Case) – 34 x 28 x 11mm (With Case) |
Package Includes:
1x Micro GPS module *1
1x JST GH 6 Position Connector 15 cm
1x JST-GH 6pin Colored Silicon Cable 15 cm
M10 Case Overview
Model: Holybro Micro M10 GPS With Case
Multi-Constellation GNSS
IST8310 Compass
High-Performance Antenna
Compact Design
Firmware Compatibility
Rechargeable Backup Battery
The M10 Case is manufactured by Holybro and is designed for electronics enthusiasts, engineers, and hobbyists working on aerial photography, FPV racing, agricultural drones, and autonomous UAV systems. As a Drone Transmitter and Receiver product, it provides the performance and reliability needed for both prototyping and production-level projects. Whether you are building your first circuit or designing a complex system, the M10 Case delivers consistent results that you can depend on.
Key Features of M10 Case
- Quality Assured: Every unit is tested before shipping to ensure reliability
- Genuine Product: Authentic Holybro product sourced from authorized channels
- Wide Compatibility: Compatible with Arduino, ESP32, Raspberry Pi, STM32, and other development boards
- Easy Integration: Well-documented with community support and code examples available online
- Fast Shipping: Ships within 24 hours with tracking from Zbotic warehouse
Applications and Use Cases for M10 Case
The M10 Case is versatile and can be used in numerous applications across different industries and project types:
- Aerial photography and videography
- Agricultural crop monitoring and spraying
- Search and rescue operations
- Surveying and mapping large areas
- Infrastructure inspection (bridges, towers, pipelines)
- FPV racing and freestyle flying
These are just some of the most common applications. The M10 Case can be adapted for many other uses depending on your specific project requirements. Browse our full range of Drone Transmitter and Receiver products to find complementary components for your build.
How to Use M10 Case
Mount the component securely on your drone frame using appropriate hardware. For flight controllers, ensure proper orientation and secure mounting with vibration dampening. For ESCs, solder motor wires and signal connections, then calibrate throttle range. For motors, mount with appropriate screws and attach propellers with correct rotation direction. For FPV equipment, mount cameras at the desired tilt angle and connect video transmitters with suitable antennas. Always perform pre-flight checks.
For detailed wiring diagrams, code examples, and tutorials for the M10 Case, check the product documentation or search for community-created guides online. Our support team at Zbotic is also available to help with technical questions.
Why Buy M10 Case from Zbotic?
Zbotic is India’s trusted online store for electronics components, development boards, sensors, motors, and robotics parts. When you buy the M10 Case from Zbotic, you get:
- Genuine Products: All items are sourced from authorized distributors and quality-checked
- Fast Shipping: Orders ship within 24 hours with real-time tracking
- Free Shipping: Free delivery on orders above Rs.999 across India
- COD Available: Pay via Cash on Delivery, UPI, cards, or net banking
- Technical Support: Expert assistance for wiring, coding, and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions about M10 Case
Where can I buy M10 Case in India?
You can buy M10 Case online at Zbotic.in with fast shipping across India. We offer genuine products with COD and multiple online payment options.
What is the price of M10 Case?
The M10 Case is available at Rs.4,014 at Zbotic. Prices may vary based on availability and offers.
Is this product compatible with Arduino and Raspberry Pi?
Most electronic components and modules available at Zbotic are compatible with popular development boards including Arduino, ESP32, and Raspberry Pi. Check the specifications for voltage compatibility.
What is the warranty on this product?
All products at Zbotic come with a quality guarantee. If you receive a defective product, contact our support team for a replacement or refund within the return window.
Do you provide technical support?
Yes, our technical support team can help with wiring diagrams, code examples, and troubleshooting. Contact us through the website or email.
Getting Started with M10 Case
Setting up the M10 Case for your project is straightforward. Begin by reviewing the specifications listed above to ensure compatibility with your existing setup. For prototyping, a breadboard-based approach is recommended before committing to a permanent PCB design.
When integrating the M10 Case into your project, consider the power requirements carefully. Always verify the operating voltage matches your power supply output. Use decoupling capacitors near power pins for stable operation, especially in noise-sensitive applications. For digital interfaces, ensure signal levels match between the M10 Case and your microcontroller.
Tips for Best Results
- Read the datasheet thoroughly before wiring — incorrect connections can damage the component permanently
- Start with example code from verified sources before writing custom firmware
- Use proper ESD protection when handling sensitive electronics
- Test with a multimeter before applying full power to verify connections
- Keep a clean, well-organized workspace for reliable results
- Document your wiring and code for future reference and troubleshooting
Holybro is known for producing reliable electronic components that meet industry standards. The M10 Case continues this tradition of quality, making it suitable for both educational and commercial projects.
Community and Support
The M10 Case is supported by a large community of makers, engineers, and hobbyists worldwide. You can find tutorials, project ideas, and troubleshooting guides on popular platforms like Arduino Forum, Instructables, Hackster.io, and YouTube. For product-specific questions, Zbotic’s technical support team is available to assist you with setup, wiring, and programming queries. Join the growing community of electronics enthusiasts who trust Zbotic for quality components and reliable service across India.
Related Products
- Skydriod Receiver kit
- SKYDROID T10 2.4Ghz 10CH Remote Controller with T10 10-Channel Receiver and FPV Camera
- Radiomaster Boxer Crush Radio Controller(M2)-ELRS Version-Iron Grey
Learn more about Holybro products at Holybro official website.
Drone Waypoint Mission Planning: ArduPilot & Mission Planner Guide
Drone Waypoint Mission Planning: ArduPilot & Mission Planner Guide Autonomous drone flights powered by GPS waypoints are transforming...
Read More →
Where to Buy Drone Parts in India: Complete Guide 2026
Whether you are building your first FPV racing quad or assembling a heavy-lift aerial photography rig, knowing where...
Read More →
ArduPilot Mission Planner: Autonomous Flight Setup
Table of Contents Introduction to ArduPilot Ecosystem Installing Mission Planner Software Connecting Your Flight Controller Calibrating Sensors and...
Read More →Technical Specifications
| Brand | Holybro |
|---|---|
| Model | M10 |
| SKU | AI6045 |
| Weight | 0.0 kg |
| Availability | Out of Stock |
Applications & Use Cases
The Holybro Micro M10 GPS With Case is a versatile drone transmitter and receiver used across a wide range of applications including FPV drone control, RC aircraft, ground vehicles, and long-range drone operations.
Common use cases:
- Setting up a new FPV quad with digital link
- Replacing a receiver after a crash
- Building a long-range fixed-wing aircraft
This product is ideal for FPV pilots, RC hobbyists, and drone builders.
Technical Tip: ELRS (ExpressLRS) offers excellent range and low latency at 2.4GHz. Ensure your transmitter and receiver use the same protocol.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine Holybro product sourced from authorized channels
Sanya Grewal –
This Holybro Micro M10 GPS With Case exceeded my expectations. Installed it yesterday and took a successful test flight today.
Simran Pandey (verified owner) –
My 5th order from Zbotic. This Holybro Micro M10 GPS With Case is excellent as always. Totally reliable store.
Vikram Mehta (verified owner) –
Using this Holybro Micro M10 GPS With Case in my hexacopter. Smooth operation and excellent thrust.
Ashwin Mittal (verified owner) –
This Holybro Micro M10 GPS With Case is value for money. Comparing with other brands, Zbotic offers the best deal.
Aisha Khurana –
Decent Holybro Micro M10 GPS With Case for the price. Using it in my quadcopter, performs well overall.
Shreyas Reddy (verified owner) –
Been using this Holybro Micro M10 GPS With Case for 3 months now, zero issues. Great product.
Anand Batra –
Perfect for my agriculture drone project. This Holybro Micro M10 GPS With Case handles the weight effortlessly.
Sakshi Khurana (verified owner) –
Good Holybro Micro M10 GPS With Case. Works well for my drone build. Packaging could be slightly better.
Ojas Malhotra (verified owner) –
Decent Holybro Micro M10 GPS With Case for the price. Using it in my quadcopter, performs well overall.
Kavya Pandey (verified owner) –
Good quality Holybro Micro M10 GPS With Case. Minor scratches on arrival but functionally perfect.